[Tue May 21 18:02:47 2013] Detection parameters:
  Position = (354.7, 318.6) = 11 1 32.44 -34 42 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.1 +/- 9.6
  Background counts = 9.7
  Rate = 0.002 +/- 0.0004

[Tue May 21 18:02:48 2013] Off-axis axis estimate = 4.33'
[Tue May 21 18:03:14 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:14 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Tue May 21 18:03:14 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Tue May 21 18:03:14 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 8.59"
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src15.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src15.csv
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src15.csv
[Tue May 21 18:03:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 21 18:03:15 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue May 21 18:03:31 2013] Spatial fit model total counts = 112.992000, observed total counts = 113.000000
[Tue May 21 18:03:31 2013] Offset between fit and detection position for source 14 = 0.188839 pixels
[Tue May 21 18:03:31 2013] 111.649000 total counts/ 77.311300 bgd. counts: snr = 3.905258
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.188839 pixels
  Position = (354.5, 318.4) = 11 1 32.49 -34 42 40.4
  Extent = 3.7 (2.8-5.4)", rotation angle = 0
  Source counts = 34.3 +/- 10.6
  Background counts = 77.3
  Rate = 0.001 +/- 0.0004
[Tue May 21 18:03:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:31 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:03:31 2013] Source does appear to be extended
[Tue May 21 18:03:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:49 2013] Initial guess for spatial extent in simple fitting = 3.75"
[Tue May 21 18:03:49 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.214
[Tue May 21 18:03:49 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 3.75"
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src15.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src15.csv
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src15.csv
[Tue May 21 18:03:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue May 21 18:03:50 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue May 21 18:04:06 2013] Spatial fit model total counts = 112.993000, observed total counts = 113.000000
[Tue May 21 18:04:06 2013] Offset between fit and detection position for source 14 = 0.016279 pixels
[Tue May 21 18:04:06 2013] 111.623200 total counts/ 76.764800 bgd. counts: snr = 3.978564
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.016279 pixels
  Position = (354.5, 318.5) = 11 1 32.49 -34 42 40.3
  Extent = 3.9 (2.8-5.4)", rotation angle = 0
  Source counts = 34.9 +/- 10.6
  Background counts = 76.8
  Rate = 0.001 +/- 0.0004
[Tue May 21 18:04:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:06 2013] Assessing source extent using major axis lower bound
[Tue May 21 18:04:06 2013] Source does appear to be extended
[Tue May 21 18:04:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 19:31:49 2013] XMMSAS src. selection expression = ellipse(30796.515600, 27657.519600, 231.442207, 231.442207, 0.000000, X, Y)
[Tue May 21 19:31:49 2013] Writing source region out to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14_src.reg
[Tue May 21 19:31:49 2013] Extracting stamp from image fullrun_mos1_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (341, 305) - (368, 332)
[Tue May 21 19:31:49 2013] XMMSAS bgd. selection expression = annulus(30796.515600, 27657.519600, 385.737011, 771.474022, X, Y)
[Tue May 21 19:31:49 2013] Writing fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14.gif
[Tue May 21 19:41:22 2013] Mean detx,y = (-3084.63, 3519.22) 
[Tue May 21 19:41:24 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 19:41:33 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 19:41:33 2013] Setting source spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 21 19:41:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue May 21 20:03:57 2013] Not generating rmf since there are only 34 counts
[Tue May 21 20:03:57 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:43 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:44 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 41.00
[Tue May 21 20:35:44 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14_bgd.pi.gz = 63.00
[Tue May 21 20:35:44 2013] Got source and background scale factors 171200.000000, 1414400.000000
[Tue May 21 20:35:44 2013] User source parameters:
  Position = (354.5, 318.5) = 11 1 32.49 -34 42 40.3
  Extent = 3.9 (2.8-5.4)", rotation angle = 0
  Source aperture counts = 33.4 +/- 7.5
  Background aperture counts = 7.6
  Rate = 0.001 +/- 0.0003

[Tue May 21 20:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:46 2013] Using photon index=1.80, rate=0.00121, arf fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14.arf
[Tue May 21 20:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:46 2013] Updating source flux to 2.2e-14
[Tue May 21 20:35:51 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 20:35:56 2013] xmm0112880201/analysis//spectral/fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete