[Tue May 21 18:02:47 2013] Detection parameters:
  Position = (426.1, 336.3) = 11 1 7.25 -34 41 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.2 +/- 10.0
  Background counts = 7.3
  Rate = 0.002 +/- 0.0003

[Tue May 21 18:02:48 2013] Off-axis axis estimate = 9.65'
[Tue May 21 18:03:14 2013] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:14 2013] Initial guess for spatial extent in simple fitting = 11.26"
[Tue May 21 18:03:14 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Tue May 21 18:03:14 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 11.26"
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src17.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src17.csv
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May 21 18:03:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src17.csv
[Tue May 21 18:03:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May 21 18:03:15 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May 21 18:03:15 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue May 21 18:03:31 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.224934 pixels away
[Tue May 21 18:03:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:03:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:03:31 2013] Assessing source extent using major
[Tue May 21 18:03:31 2013] Source does appear to be extended
[Tue May 21 18:03:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 18:03:49 2013] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Tue May 21 18:03:49 2013] Initial guess for spatial extent in simple fitting = 11.26"
[Tue May 21 18:03:49 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.944
[Tue May 21 18:03:49 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 11.26"
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src17.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src17.csv
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May 21 18:03:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src17.csv
[Tue May 21 18:03:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May 21 18:03:50 2013] fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May 21 18:03:50 2013] Fit fullrun_mos1_xmm0112880201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue May 21 18:04:06 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.084508 pixels away
[Tue May 21 18:04:06 2013] Vigneting correction estimate = 1.000000
[Tue May 21 18:04:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 18:04:06 2013] Assessing source extent using major
[Tue May 21 18:04:06 2013] Source does appear to be extended
[Tue May 21 18:04:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 19:31:49 2013] XMMSAS src. selection expression = ellipse(37022.585510, 29210.812286, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 19:31:49 2013] Writing source region out to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13_src.reg
[Tue May 21 19:31:49 2013] Extracting stamp from image fullrun_mos1_xmm0112880201_pi300-10000_cl_sm2.00.img.gz, (389, 299) - (464, 374)
[Tue May 21 19:31:49 2013] XMMSAS bgd. selection expression = annulus(37022.585510, 29210.812286, 1087.500000, 2175.000000, X, Y)
[Tue May 21 19:31:49 2013] Writing fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13.gif
[Tue May 21 19:42:03 2013] Mean detx,y = (-5795.50, 9424.09) 
[Tue May 21 19:42:04 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 19:42:22 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 19:42:22 2013] Setting source spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue May 21 19:42:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue May 21 20:04:15 2013] Not generating rmf since there are only 58 counts
[Tue May 21 20:04:15 2013] rmf not generated due to insufficient counts
[Tue May 21 20:35:44 2013] Updating aperture counts using extracted products
[Tue May 21 20:35:44 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 115.00
[Tue May 21 20:35:44 2013] Total counts from fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 448.00
[Tue May 21 20:35:44 2013] Got source and background scale factors 1213844.000000, 9970812.000000
[Tue May 21 20:35:44 2013] User source parameters:
  Position = (426.1, 336.3) = 11 1 7.25 -34 41 21.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 60.5 +/- 11.8
  Background aperture counts = 54.5
  Rate = 0.002 +/- 0.0004

[Tue May 21 20:35:44 2013] Updating counts from extracted products
[Tue May 21 20:35:44 2013] Set source signif. to 60.46/7.39 = 8.19
[Tue May 21 20:35:46 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 20:35:46 2013] Using photon index=1.80, rate=0.0021, arf fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13.arf
[Tue May 21 20:35:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 20:35:46 2013] Updating source flux to 3.8e-14
[Tue May 21 20:35:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 20:35:56 2013] xmm0112880201/analysis//spectral/fullrun_mos1_xmm0112880201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete