[Tue Aug 21 23:38:56 2012] Detection parameters:
  Position = (297.7, 273.8) = 11 31 55.39 -34 36 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48121.0 +/- 257.9
  Background counts = 30.7
  Rate = 2 +/- 0.01

[Tue Aug 21 23:38:57 2012] Off-axis axis estimate = 1.79'
[Tue Aug 21 23:41:26 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 23:41:26 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Aug 21 23:41:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.049
[Tue Aug 21 23:41:26 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.32"
[Wed Aug 22 01:43:18 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 22 01:43:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 22 01:43:18 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 22 01:43:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 22 01:43:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 01:43:19 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 22 01:43:19 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 22 01:43:19 2012] Fit fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 22 03:15:02 2012] Spatial fit model total counts = 43933.100000, observed total counts = 43468.000000
[Wed Aug 22 03:15:02 2012] Offset between fit and detection position for source 3 = 0.194894 pixels
[Wed Aug 22 03:15:02 2012] 44104.290000 total counts/ 9309.090000 bgd. counts: snr = 360.633214
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.194894 pixels
  Position = (297.6, 273.6) = 11 31 55.42 -34 36 27.4
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 34795.2 +/- 210.0
  Background counts = 9309.1
  Rate = 1 +/- 0.008
[Wed Aug 22 03:15:02 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 03:15:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 03:15:02 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 03:15:02 2012] Source does appear to be extended
[Wed Aug 22 03:15:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 03:15:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 03:15:22 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Wed Aug 22 03:15:22 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.662
[Wed Aug 22 03:15:22 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.85"
[Wed Aug 22 05:45:06 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 22 05:45:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 22 05:45:06 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 22 05:45:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 22 05:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 05:45:07 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 22 05:45:07 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 22 05:45:07 2012] Fit fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 22 06:49:19 2012] Spatial fit model total counts = 43933.100000, observed total counts = 43468.000000
[Wed Aug 22 06:49:19 2012] Offset between fit and detection position for source 3 = 0.000002 pixels
[Wed Aug 22 06:49:19 2012] 44104.290000 total counts/ 9308.990000 bgd. counts: snr = 360.636188
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000002 pixels
  Position = (297.6, 273.6) = 11 31 55.42 -34 36 27.4
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 34795.3 +/- 210.0
  Background counts = 9309.0
  Rate = 1 +/- 0.008
[Wed Aug 22 06:49:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:49:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:49:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 06:49:19 2012] Source does appear to be extended
[Wed Aug 22 06:49:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:49:38 2012] Counts = 34795.300000, rescaling region sizes by 3.000000
[Wed Aug 22 06:49:38 2012] XMMSAS src. selection expression = ellipse(25840.753600, 23757.456000, 1052.200830, 1052.200830, 0.000000, X, Y)
[Wed Aug 22 06:49:38 2012] Writing source region out to fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug 22 06:49:38 2012] Extracting stamp from image fullrun_pn_xmm0112880101_pi300-10000_cl_sm2.00.img.gz, (237, 213) - (358, 334)
[Wed Aug 22 06:49:38 2012] XMMSAS bgd. selection expression = annulus(25840.753600, 23757.456000, 5261.004151, 10522.008303, X, Y) && !ellipse(21309.535370, 17848.925049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29433.436493, 16248.914124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.537689, 26413.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33631.672363, 13289.168442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18642.025600, 34372.178800, 2213.192064, 428.087212, 54.882000, X, Y) && !ellipse(14918.409912, 22664.646393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16730.251022, 14840.009552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33788.239441, 34955.873535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28991.387390, 34369.045685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19365.091106, 33459.733202, 1390.403053, 925.213214, 77.893101, X, Y) && !ellipse(19456.631782, 33157.637216, 1668.280048, 582.794086, 53.849175, X, Y) && !ellipse(20046.570000, 32238.698000, 2717.184078, 2717.184078, 0.000000, X, Y) && !ellipse(21942.880020, 32672.040400, 511.634415, 511.634415, 0.000000, X, Y) && !ellipse(19178.508465, 32338.386600, 326.153609, 326.153609, 0.000000, X, Y) && !ellipse(29047.920929, 32082.914124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20248.599600, 31983.748800, 1582.120046, 421.053612, 55.797300, X, Y) && !ellipse(20670.726000, 31388.614000, 1487.544043, 1487.544043, 0.000000, X, Y) && !ellipse(21001.024000, 30892.226000, 1251.904036, 1251.904036, 0.000000, X, Y) && !ellipse(21636.672090, 29959.396655, 1425.528041, 518.138080, 59.891727, X, Y) && !ellipse(21191.000000, 30718.238000, 1643.760047, 1643.760047, 0.000000, X, Y) && !ellipse(28667.405520, 29316.046800, 499.999214, 499.999214, 0.000000, X, Y) && !ellipse(22290.465149, 28999.413544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23020.638200, 28017.392760, 718.216021, 718.216021, 0.000000, X, Y) && !ellipse(23020.548000, 27993.254000, 1211.120035, 1211.120035, 0.000000, X, Y) && !ellipse(23784.242000, 26796.565000, 1134.256033, 516.278415, 55.202000, X, Y) && !ellipse(23900.622000, 26587.488000, 1133.184033, 1133.184033, 0.000000, X, Y) && !ellipse(24150.494000, 26266.944000, 1519.208044, 1519.208044, 0.000000, X, Y) && !ellipse(33144.745300, 25075.086426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19420.031998, 24355.740753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36326.781982, 23238.209717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17856.538345, 22858.346710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24735.471008, 22449.504059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20576.571180, 21835.260600, 526.122415, 311.011209, 46.995083, X, Y) && !ellipse(25963.281342, 21872.232986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17484.267800, 19756.413800, 341.083210, 341.083210, 0.000000, X, Y) && !ellipse(16550.478989, 18221.681870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35166.119995, 18075.381790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30554.490400, 17329.510800, 456.415213, 456.415213, 0.000000, X, Y) && !ellipse(34120.431396, 14564.182541, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 06:49:38 2012] Writing fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src3.gif
[Wed Aug 22 06:53:31 2012] Mean detx,y = (214.82, -261.05) 
[Wed Aug 22 06:53:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 06:56:34 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 06:56:34 2012] Setting source spectrum file to fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug 22 06:56:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug 22 09:47:09 2012] Updating aperture counts using extracted products
[Wed Aug 22 09:47:09 2012] Error reading totcts from fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug 22 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 09:47:10 2012] Using photon index=1.80, rate=1.25, arf fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src3.arf
[Wed Aug 22 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 09:47:10 2012] Updating source flux to 3e-12