[Tue Aug 21 23:38:56 2012] Detection parameters:
  Position = (152.4, 229.1) = 11 32 46.62 -34 39 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 316.4 +/- 22.6
  Background counts = 22.1
  Rate = 0.01 +/- 0.0008

[Tue Aug 21 23:38:57 2012] Off-axis axis estimate = 11.72'
[Tue Aug 21 23:41:26 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 23:41:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 23:41:26 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Tue Aug 21 23:41:26 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Tue Aug 21 23:41:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.29"
[Wed Aug 22 01:43:18 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 22 01:43:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 01:43:18 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 22 01:43:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 01:43:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 01:43:19 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 22 01:43:19 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 22 01:43:19 2012] Fit fullrun_pn_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 22 03:15:02 2012] Spatial fit model total counts = 745.363000, observed total counts = 723.000000
[Wed Aug 22 03:15:02 2012] Offset between fit and detection position for source 1 = 0.111514 pixels
[Wed Aug 22 03:15:02 2012] 751.088000 total counts/ 528.969000 bgd. counts: snr = 9.657631
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.111514 pixels
  Position = (152.5, 229.1) = 11 32 46.59 -34 39 40.4
  Extent = 5.8 (5.1-6.8)", rotation angle = 0
  Source counts = 222.1 +/- 27.4
  Background counts = 529.0
  Rate = 0.008 +/- 0.001
[Wed Aug 22 03:15:02 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 03:15:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 03:15:02 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 03:15:02 2012] Source does appear to be extended
[Wed Aug 22 03:15:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 03:15:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 03:15:22 2012] Initial guess for spatial extent in simple fitting = 5.79"
[Wed Aug 22 03:15:22 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.896
[Wed Aug 22 03:15:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.79"
[Wed Aug 22 05:45:06 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 22 05:45:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 05:45:06 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 22 05:45:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 05:45:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 05:45:07 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 22 05:45:07 2012] fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 22 05:45:07 2012] Fit fullrun_pn_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 22 06:49:19 2012] Spatial fit model total counts = 484.000000, observed total counts = 484.000000
[Wed Aug 22 06:49:19 2012] Offset between fit and detection position for source 1 = 0.035718 pixels
[Wed Aug 22 06:49:19 2012] 490.181000 total counts/ 276.301000 bgd. counts: snr = 12.867049
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.035718 pixels
  Position = (152.4, 229.1) = 11 32 46.60 -34 39 40.3
  Extent = 5.6 (4.8-6.5)", rotation angle = 0
  Source counts = 213.9 +/- 22.1
  Background counts = 276.3
  Rate = 0.008 +/- 0.0008
[Wed Aug 22 06:49:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:49:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:49:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 06:49:19 2012] Source does appear to be extended
[Wed Aug 22 06:49:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:49:38 2012] XMMSAS src. selection expression = ellipse(13212.768400, 19885.283000, 334.781410, 334.781410, 0.000000, X, Y)
[Wed Aug 22 06:49:38 2012] Writing source region out to fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 22 06:49:38 2012] Extracting stamp from image fullrun_pn_xmm0112880101_pi300-10000_cl_sm2.00.img.gz, (133, 210) - (172, 248)
[Wed Aug 22 06:49:38 2012] XMMSAS bgd. selection expression = annulus(13212.768400, 19885.283000, 557.969016, 1115.938032, X, Y)
[Wed Aug 22 06:49:38 2012] Writing fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1.gif
[Wed Aug 22 06:49:52 2012] Mean detx,y = (12837.25, 3600.10) 
[Wed Aug 22 06:49:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 06:50:07 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 06:50:07 2012] Setting source spectrum file to fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 06:50:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 22 09:47:09 2012] Updating aperture counts using extracted products
[Wed Aug 22 09:47:09 2012] Error reading totcts from fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 09:47:10 2012] Using photon index=1.80, rate=0.00765, arf fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 09:47:10 2012] Updating source flux to 5.2e-14
[Wed Aug 22 09:50:00 2012] Reading fit data from xmm0112880101/analysis//spectral/fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 22 09:50:00 2012] Spectral fit parameter nH value = 6.81083e+20
[Wed Aug 22 09:50:00 2012] Spectral fit parameter PhoIndex value = 2.41235
[Wed Aug 22 09:50:00 2012] Failed to get F(0.3-8.0) from xmm0112880101/analysis//spectral/fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 22 09:50:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 09:50:00 2012] Using Nh = 6.8e+20, photon index=2.41, rate=0.00765, arf fullrun_pn_xmm0112880101_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 09:50:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 09:50:00 2012] Updating source flux to 4.2e-14