[Tue Aug 21 23:39:19 2012] Detection parameters:
  Position = (297.5, 273.9) = 11 31 55.44 -34 36 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14068.9 +/- 141.4
  Background counts = 10.0
  Rate = 0.5 +/- 0.005

[Tue Aug 21 23:39:19 2012] Off-axis axis estimate = 1.78'
[Wed Aug 22 01:43:20 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 01:43:20 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Aug 22 01:43:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Wed Aug 22 01:43:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed Aug 22 02:22:56 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 22 02:22:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 02:22:56 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 22 02:22:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 02:22:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 02:22:57 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 22 02:22:57 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 22 02:22:57 2012] Fit fullrun_mos1_xmm0112880101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 22 03:15:06 2012] Spatial fit model total counts = 12331.300000, observed total counts = 12337.000000
[Wed Aug 22 03:15:06 2012] Offset between fit and detection position for source 4 = 0.084941 pixels
[Wed Aug 22 03:15:06 2012] 12353.340000 total counts/ 2571.730000 bgd. counts: snr = 192.884646
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.084941 pixels
  Position = (297.5, 273.8) = 11 31 55.43 -34 36 26.6
  Extent = 5.6 (5.4-5.6)", rotation angle = 0
  Source counts = 9781.6 +/- 111.1
  Background counts = 2571.7
  Rate = 0.3 +/- 0.004
[Wed Aug 22 03:15:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 03:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 03:15:06 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 03:15:06 2012] Source does appear to be extended
[Wed Aug 22 03:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 05:45:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 05:45:08 2012] Initial guess for spatial extent in simple fitting = 5.56"
[Wed Aug 22 05:45:08 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.950
[Wed Aug 22 05:45:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.56"
[Wed Aug 22 06:13:13 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 22 06:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 06:13:13 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 22 06:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 06:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:13:13 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 22 06:13:13 2012] fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 22 06:13:13 2012] Fit fullrun_mos1_xmm0112880101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 22 06:49:23 2012] Spatial fit model total counts = 12345.000000, observed total counts = 12345.000000
[Wed Aug 22 06:49:23 2012] Offset between fit and detection position for source 4 = 0.010148 pixels
[Wed Aug 22 06:49:23 2012] 12403.750000 total counts/ 2602.000000 bgd. counts: snr = 192.154241
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.010148 pixels
  Position = (297.5, 273.8) = 11 31 55.43 -34 36 26.7
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 9801.8 +/- 111.4
  Background counts = 2602.0
  Rate = 0.3 +/- 0.004
[Wed Aug 22 06:49:23 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:49:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:49:23 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 06:49:23 2012] Source does appear to be extended
[Wed Aug 22 06:49:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 09:10:32 2012] Counts = 9801.750000, rescaling region sizes by 2.000000
[Wed Aug 22 09:10:32 2012] XMMSAS src. selection expression = ellipse(25837.836400, 23772.104200, 667.820419, 667.820419, 0.000000, X, Y)
[Wed Aug 22 09:10:32 2012] Writing source region out to fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 22 09:10:32 2012] Extracting stamp from image fullrun_mos1_xmm0112880101_pi300-10000_cl_sm2.00.img.gz, (259, 235) - (336, 312)
[Wed Aug 22 09:10:32 2012] XMMSAS bgd. selection expression = annulus(25837.836400, 23772.104200, 2226.068064, 4452.136128, X, Y) && !ellipse(21265.893252, 25315.803000, 437.068013, 437.068013, 0.000000, X, Y)
[Wed Aug 22 09:10:32 2012] Writing fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4.gif
[Wed Aug 22 09:10:35 2012] Mean detx,y = (330.34, -108.06) 
[Wed Aug 22 09:10:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 09:10:52 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 09:10:52 2012] Setting source spectrum file to fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 09:10:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 22 09:47:10 2012] Updating aperture counts using extracted products
[Wed Aug 22 09:47:10 2012] Error reading totcts from fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 09:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 09:47:11 2012] Using photon index=1.80, rate=0.332, arf fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4.arf
[Wed Aug 22 09:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 09:47:11 2012] Updating source flux to 3.3e-12
[Wed Aug 22 09:47:21 2012] Reading fit data from xmm0112880101/analysis//spectral/fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4_pl.csv
[Wed Aug 22 09:47:21 2012] Spectral fit parameter nH value = 2.48786e+21
[Wed Aug 22 09:47:21 2012] Spectral fit parameter PhoIndex value = 4.13865
[Wed Aug 22 09:47:21 2012] Failed to get F(0.3-8.0) from xmm0112880101/analysis//spectral/fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Aug 22 09:47:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 09:47:21 2012] Using Nh = 2.5e+21, photon index=4.14, rate=0.332, arf fullrun_mos1_xmm0112880101_pi300-10000_pass1_cl_src4.arf
[Wed Aug 22 09:47:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 09:47:21 2012] Updating source flux to 2.1e-12