[Mon May 13 06:11:59 2013] Detection parameters:
  Position = (227.5, 294.1) = 8 53 49.90 -47 15 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.8 +/- 20.1
  Background counts = 149.6
  Rate = 0.006 +/- 0.0008

[Mon May 13 06:12:03 2013] Off-axis axis estimate = 5.15'
[Mon May 13 06:13:12 2013] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:13:12 2013] Initial guess for spatial extent in simple fitting = 9.01"
[Mon May 13 06:13:12 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.908
[Mon May 13 06:13:12 2013] Giving source the simple spatial ID 89 for pass 0, mean size = 9.01"
[Mon May 13 06:13:15 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_src89.ximg exists
[Mon May 13 06:13:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_src89.csv
[Mon May 13 06:13:15 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_src89_1.ximg exists
[Mon May 13 06:13:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_src89.csv
[Mon May 13 06:13:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:13:18 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Mon May 13 06:13:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_tfrozen_src89.csv
[Mon May 13 06:13:18 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Mon May 13 06:13:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_tfrozen_src89.csv
[Mon May 13 06:13:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870501_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:13:50 2013] Spatial fit model total counts = 1790.180000, observed total counts = 1470.000000
[Mon May 13 06:13:50 2013] Poor agreement between spatial fit and data for source 91
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 06:13:50 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:13:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:13:50 2013] Assessing source extent using major
[Mon May 13 06:13:50 2013] Source does appear to be extended
[Mon May 13 06:13:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:14:51 2013] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:14:51 2013] Initial guess for spatial extent in simple fitting = 9.01"
[Mon May 13 06:14:51 2013] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.908
[Mon May 13 06:14:51 2013] Giving source the simple spatial ID 76 for pass 1, mean size = 9.01"
[Mon May 13 06:14:54 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_src76.ximg exists
[Mon May 13 06:14:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_src76.csv
[Mon May 13 06:14:54 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_src76_1.ximg exists
[Mon May 13 06:14:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_src76.csv
[Mon May 13 06:14:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:14:56 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Mon May 13 06:14:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_tfrozen_src76.csv
[Mon May 13 06:14:56 2013] fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Mon May 13 06:14:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_tfrozen_src76.csv
[Mon May 13 06:14:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870501_pi300-10000_cl_pass1_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:15:28 2013] Source 91 is offset by -7.653200 and -2.940729 pixels which is larger than
2 X fitted extent = 1.035632 x 1.035632, not incorporating fit results
[Mon May 13 06:15:28 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:15:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:15:28 2013] Assessing source extent using major
[Mon May 13 06:15:28 2013] Source does appear to be extended
[Mon May 13 06:15:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:16:21 2013] XMMSAS src. selection expression = ellipse(19741.959610, 25535.067596, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 06:16:21 2013] Not overwriting source region fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91_src.reg
[Mon May 13 06:16:21 2013] Extracting stamp from image fullrun_pn_xmm0112870501_pi300-10000_cl_sm2.00.img.gz, (190, 257) - (265, 332)
[Mon May 13 06:16:21 2013] XMMSAS bgd. selection expression = annulus(19741.959610, 25535.067596, 1087.500000, 2175.000000, X, Y) && !ellipse(17369.442360, 26029.179000, 552.815216, 384.906411, 67.703600, X, Y) && !ellipse(16777.967209, 26794.767487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22065.452580, 26368.974800, 1020.008029, 1020.008029, 0.000000, X, Y) && !ellipse(21176.098000, 25377.268000, 1311.568038, 1311.568038, 0.000000, X, Y) && !ellipse(22339.301758, 26042.756989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22703.869141, 23873.202454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21737.151733, 23966.104584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21026.170731, 23803.484039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21992.515106, 23454.063599, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 06:16:21 2013] Writing fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91.gif
[Mon May 13 06:47:27 2013] Mean detx,y = (-7144.12, 1683.58) 
[Mon May 13 06:47:30 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 06:47:52 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 06:47:53 2013] Setting source spectrum file to fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Mon May 13 06:47:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Mon May 13 08:27:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 08:27:30 2013] rmf not generated due to insufficient counts
[Mon May 13 10:15:17 2013] Updating aperture counts using extracted products
[Mon May 13 10:15:17 2013] Total counts from fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91_src_b10.pi.gz = 1043.00
[Mon May 13 10:15:17 2013] Total counts from fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91_bgd.pi.gz = 5691.00
[Mon May 13 10:15:17 2013] Got source and background scale factors 1148002.000000, 7004104.000000
[Mon May 13 10:15:17 2013] User source parameters:
  Position = (227.5, 294.1) = 8 53 49.90 -47 15 40.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 110.2 +/- 33.3
  Background aperture counts = 932.8
  Rate = 0.003 +/- 0.0008

[Mon May 13 10:15:17 2013] Updating counts from extracted products
[Mon May 13 10:15:17 2013] Set source signif. to 110.22/30.54 = 3.61
[Mon May 13 10:15:34 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 10:15:34 2013] Using photon index=1.80, rate=0.0025, arf fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91.arf
[Mon May 13 10:15:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 10:15:34 2013] Updating source flux to 2.2e-14
[Mon May 13 10:15:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 10:16:08 2013] xmm0112870501/analysis//spectral/fullrun_pn_xmm0112870501_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete