[Sun Jun 23 12:17:32 2013] Detection parameters:
  Position = (302.0, 332.9) = 8 47 48.75 -46 28 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.3 +/- 25.2
  Background counts = 478.2
  Rate = 0.01 +/- 0.002

[Sun Jun 23 12:17:32 2013] Off-axis axis estimate = 2.51'
[Sun Jun 23 12:24:03 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:24:03 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Jun 23 12:24:03 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Sun Jun 23 12:24:03 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 7.68"
[Sun Jun 23 13:58:07 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun 23 13:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_src16.csv
[Sun Jun 23 13:58:07 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun 23 13:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_src16.csv
[Sun Jun 23 13:58:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 13:58:08 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun 23 13:58:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 23 13:58:08 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun 23 13:58:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 23 13:58:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:19:37 2013] Source 18 is offset by -6.314480 and -1.820262 pixels which is larger than
2 X fitted extent = 1.243733 x 1.243733, not incorporating fit results
[Sun Jun 23 14:19:37 2013] Spatial fit model total counts = 5105.900000, observed total counts = 4241.000000
[Sun Jun 23 14:19:37 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 14:19:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 14:19:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 14:19:37 2013] Assessing source extent using major
[Sun Jun 23 14:19:37 2013] Source does appear to be extended
[Sun Jun 23 14:19:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:19:46 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 14:19:46 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Jun 23 14:19:46 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Sun Jun 23 14:19:46 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.68"
[Sun Jun 23 15:44:41 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 23 15:44:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 15:44:41 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 23 15:44:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 15:44:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 15:44:41 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 23 15:44:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 15:44:41 2013] fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 23 15:44:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 15:44:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 15:57:38 2013] Source 18 is offset by -0.382386 and 4.743416 pixels which is larger than
2 X fitted extent = 1.208382 x 1.208382, not incorporating fit results
[Sun Jun 23 15:57:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 15:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 15:57:38 2013] Assessing source extent using major
[Sun Jun 23 15:57:38 2013] Source does appear to be extended
[Sun Jun 23 15:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 15:57:47 2013] XMMSAS src. selection expression = ellipse(26225.144226, 28909.599213, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 15:57:47 2013] Writing source region out to fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun 23 15:57:47 2013] Extracting stamp from image fullrun_pn_xmm0112870401_pi300-10000_cl_sm2.00.img.gz, (264, 295) - (339, 370)
[Sun Jun 23 15:57:47 2013] XMMSAS bgd. selection expression = annulus(26225.144226, 28909.599213, 1087.500000, 2175.000000, X, Y) && !ellipse(25978.808000, 32190.538000, 1428.680041, 1428.680041, 0.000000, X, Y) && !ellipse(26660.531860, 31804.454651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26252.169769, 31270.363647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.469574, 30560.942474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26436.882812, 30318.965759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26172.702087, 29634.682404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.130585, 29620.791290, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 15:57:47 2013] Writing fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18.gif
[Sun Jun 23 16:07:47 2013] Mean detx,y = (-613.47, -1592.95) 
[Sun Jun 23 16:07:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 16:08:23 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 16:08:23 2013] Setting source spectrum file to fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun 23 16:08:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun 23 16:29:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 16:29:26 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:53:06 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:53:06 2013] Total counts from fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 2860.00
[Sun Jun 23 16:53:06 2013] Total counts from fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 14173.00
[Sun Jun 23 16:53:06 2013] Got source and background scale factors 1093306.000000, 6181401.000000
[Sun Jun 23 16:53:06 2013] User source parameters:
  Position = (302.0, 332.9) = 8 47 48.75 -46 28 3.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 353.2 +/- 54.5
  Background aperture counts = 2506.8
  Rate = 0.02 +/- 0.003

[Sun Jun 23 16:53:06 2013] Updating counts from extracted products
[Sun Jun 23 16:53:06 2013] Set source signif. to 353.22/50.07 = 7.05
[Sun Jun 23 16:53:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:53:09 2013] Using photon index=1.80, rate=0.0186, arf fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18.arf
[Sun Jun 23 16:53:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:53:09 2013] Updating source flux to 1.2e-13
[Sun Jun 23 16:53:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 16:53:20 2013] xmm0112870401/analysis//spectral/fullrun_pn_xmm0112870401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete