[Thu May 24 13:25:55 2012] Detection parameters:
  Position = (319.5, 334.8) = 8 48 54.47 -45 37 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 576.1 +/- 41.4
  Background counts = 581.6
  Rate = 0.03 +/- 0.002

[Thu May 24 13:25:57 2012] Off-axis axis estimate = 3.05'
[Thu May 24 13:31:38 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:31:38 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Thu May 24 13:31:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.553
[Thu May 24 13:31:38 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.95"
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src5.csv
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src5.csv
[Thu May 24 17:22:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:22:25 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 24 17:22:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 24 17:22:25 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 24 17:22:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 24 17:22:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:38 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Fri May 25 01:18:38 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:38 2012] Assessing source extent using major
[Fri May 25 01:18:38 2012] Source does appear to be extended
[Fri May 25 01:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:19:19 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri May 25 01:19:19 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Fri May 25 01:19:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.553
[Fri May 25 01:19:19 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.95"
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src5.csv
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src5.csv
[Fri May 25 04:00:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 25 04:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 25 04:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 25 04:00:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:03:37 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Fri May 25 11:03:37 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:37 2012] Assessing source extent using major
[Fri May 25 11:03:37 2012] Source does appear to be extended
[Fri May 25 11:03:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 11:04:31 2012] XMMSAS src. selection expression = ellipse(27751.613495, 29083.065552, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 11:04:31 2012] Writing source region out to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src6_src.reg
[Fri May 25 11:04:31 2012] Extracting stamp from image fullrun_pn_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (282, 297) - (357, 372)
[Fri May 25 11:04:31 2012] XMMSAS bgd. selection expression = annulus(27751.613495, 29083.065552, 1087.500000, 2175.000000, X, Y) && !ellipse(24766.747253, 30399.463593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.544373, 29531.643372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.939545, 29019.793549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28574.991180, 28052.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.583740, 27860.836090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.697800, 27603.729200, 585.686417, 585.686417, 0.000000, X, Y) && !ellipse(30532.621277, 27093.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.539420, 27446.069200, 803.728023, 803.728023, 0.000000, X, Y) && !ellipse(27935.552000, 27543.120000, 1156.632033, 1156.632033, 0.000000, X, Y) && !ellipse(23179.476000, 31563.188000, 3055.040088, 3055.040088, 0.000000, X, Y) && !ellipse(25137.317657, 31004.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25783.696160, 30879.153800, 510.124815, 510.124815, 0.000000, X, Y) && !ellipse(26257.922000, 29994.728000, 1305.144038, 1305.144038, 0.000000, X, Y) && !ellipse(26165.478000, 30383.504400, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(25566.317291, 29460.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26388.980774, 29183.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.789429, 28924.100983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28028.718903, 28106.253723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26760.929138, 27275.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.452000, 26661.806000, 1228.904035, 1228.904035, 0.000000, X, Y) && !ellipse(29328.392600, 26694.945600, 1253.328036, 763.578422, 29.576000, X, Y) && !ellipse(30275.604000, 26302.626000, 2015.360058, 2015.360058, 0.000000, X, Y) && !ellipse(29706.970000, 26207.470000, 2457.808071, 2457.808071, 0.000000, X, Y)
[Fri May 25 11:04:31 2012] Writing fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src6.gif
[Fri May 25 11:08:39 2012] Mean detx,y = (968.39, -1645.39) 
[Fri May 25 11:08:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 11:09:08 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 11:09:09 2012] Setting source spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri May 25 11:09:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri May 25 12:43:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 25 12:43:56 2012] rmf not generated due to insufficient counts
[Sun May 27 23:01:34 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:34 2012] Error reading totcts from fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May 27 23:01:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:35 2012] Using photon index=1.80, rate=0.0337, arf fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src6.arf
[Sun May 27 23:01:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:35 2012] Updating source flux to 1e-13
[Sun May 27 23:15:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting