[Thu May 24 13:25:56 2012] Detection parameters:
  Position = (336.0, 308.0) = 8 48 47.64 -45 39 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 480.9 +/- 46.4
  Background counts = 630.8
  Rate = 0.02 +/- 0.002

[Thu May 24 13:25:57 2012] Off-axis axis estimate = 2.81'
[Thu May 24 13:31:38 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:31:38 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Thu May 24 13:31:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.756
[Thu May 24 13:31:38 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.83"
[Thu May 24 17:22:25 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src40.ximg exists
[Thu May 24 17:22:25 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May 24 17:22:25 2012] Fit fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src40 appears to have run properly
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May 24 17:22:26 2012] Fit fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Fri May 25 01:18:38 2012] Spatial fit model total counts = 10167.500000, observed total counts = 10163.000000
[Fri May 25 01:18:38 2012] Offset between fit and detection position for source 44 = 1.825686 pixels
[Fri May 25 01:18:38 2012] Warning, changing simple spatial fit ID from 40 to 11
[Fri May 25 01:18:38 2012] 10158.481000 total counts/ 9492.750000 bgd. counts: snr = 6.832864
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.825686 pixels
  Position = (334.5, 307.0) = 8 48 48.27 -45 39 51.0
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 665.7 +/- 100.8
  Background counts = 9492.8
  Rate = 0.03 +/- 0.004
[Fri May 25 01:18:38 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:38 2012] Assessing source extent using major axis lower bound
[Fri May 25 01:18:38 2012] Source does appear to be extended
[Fri May 25 01:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:18:38 2012] Source is confused with source 14
[Fri May 25 01:19:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 01:19:19 2012] Initial guess for spatial extent in simple fitting = 15.36"
[Fri May 25 01:19:19 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.985
[Fri May 25 01:19:19 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 15.36"
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src33.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src33.csv
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src33.csv
[Fri May 25 04:00:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri May 25 04:00:40 2012] Fit fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri May 25 11:03:37 2012] Spatial fit model total counts = 10169.700000, observed total counts = 10163.000000
[Fri May 25 11:03:37 2012] Offset between fit and detection position for source 44 = 0.131656 pixels
[Fri May 25 11:03:37 2012] Warning, changing simple spatial fit ID from 33 to 10
[Fri May 25 11:03:37 2012] 10164.017000 total counts/ 9514.250000 bgd. counts: snr = 6.661475
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.131656 pixels
  Position = (334.3, 307.0) = 8 48 48.32 -45 39 51.0
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 649.8 +/- 100.8
  Background counts = 9514.2
  Rate = 0.03 +/- 0.004
[Fri May 25 11:03:37 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:37 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:03:37 2012] Source does appear to be extended
[Fri May 25 11:03:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 11:04:34 2012] XMMSAS src. selection expression = ellipse(29038.452000, 26661.806000, 921.678027, 921.678027, 0.000000, X, Y)
[Fri May 25 11:04:34 2012] Writing source region out to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src44_src.reg
[Fri May 25 11:04:34 2012] Extracting stamp from image fullrun_pn_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (281, 254) - (387, 360)
[Fri May 25 11:04:34 2012] XMMSAS bgd. selection expression = annulus(29038.452000, 26661.806000, 1536.130044, 3072.260088, X, Y) && !ellipse(27010.544373, 29531.643372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27751.613495, 29083.065552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.939545, 29019.793549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28574.991180, 28052.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.583740, 27860.836090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.697800, 27603.729200, 585.686417, 585.686417, 0.000000, X, Y) && !ellipse(30532.621277, 27093.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.539420, 27446.069200, 803.728023, 803.728023, 0.000000, X, Y) && !ellipse(27935.552000, 27543.120000, 1156.632033, 1156.632033, 0.000000, X, Y) && !ellipse(23179.476000, 31563.188000, 3055.040088, 3055.040088, 0.000000, X, Y) && !ellipse(26257.922000, 29994.728000, 1305.144038, 1305.144038, 0.000000, X, Y) && !ellipse(26165.478000, 30383.504400, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(25566.317291, 29460.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26388.980774, 29183.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.789429, 28924.100983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28028.718903, 28106.253723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26760.929138, 27275.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31045.766754, 26308.087341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.392600, 26694.945600, 1253.328036, 763.578422, 29.576000, X, Y) && !ellipse(30275.604000, 26302.626000, 2015.360058, 2015.360058, 0.000000, X, Y) && !ellipse(29706.970000, 26207.470000, 2457.808071, 2457.808071, 0.000000, X, Y) && !ellipse(31527.782013, 25449.477417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31324.560760, 24935.142487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32193.150940, 24552.627106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32654.833984, 24143.266724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33277.524000, 23507.830000, 1594.120046, 1594.120046, 0.000000, X, Y) && !ellipse(25891.221191, 22936.165619, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 11:04:34 2012] Writing fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src44.gif
[Fri May 25 12:00:26 2012] Mean detx,y = (2073.81, 858.21) 
[Fri May 25 12:00:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 12:00:57 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 12:00:58 2012] Setting source spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri May 25 12:00:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun May 27 23:01:34 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:34 2012] Error reading totcts from fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun May 27 23:01:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:35 2012] Using photon index=1.80, rate=0.0282, arf fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src44.arf
[Sun May 27 23:01:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:35 2012] Updating source flux to 6.7e-14
[Sun May 27 23:15:00 2012] Flag c found in src. 44 procflags, skipping spectral fitting