[Thu May 24 13:25:56 2012] Detection parameters: Position = (322.7, 323.6) = 8 48 53.14 -45 38 30.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 453.2 +/- 39.3 Background counts = 628.2 Rate = 0.02 +/- 0.002 [Thu May 24 13:25:57 2012] Off-axis axis estimate = 2.54' [Thu May 24 13:31:38 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting [Thu May 24 13:31:38 2012] Initial guess for spatial extent in simple fitting = 7.70" [Thu May 24 13:31:38 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.214 [Thu May 24 13:31:38 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.70" [Thu May 24 17:22:25 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src34.ximg exists [Thu May 24 17:22:25 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src34_1.ximg exists [Thu May 24 17:22:25 2012] Fit fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src34 appears to have run properly [Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists [Thu May 24 17:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src34.csv [Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists [Thu May 24 17:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src34.csv [Thu May 24 17:22:26 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 25 01:18:38 2012] Source 38 is offset by 1.127206 and 5.279744 pixels which is larger than 2 X fitted extent = 0.913857 x 0.913857, not incorporating fit results [Fri May 25 01:18:38 2012] Warning, spatial fit 34 centroid is now closest to src. 8 [Fri May 25 01:18:38 2012] Vigneting correction estimate = 1.000000 [Fri May 25 01:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 01:18:38 2012] Assessing source extent using major [Fri May 25 01:18:38 2012] Source does appear to be extended [Fri May 25 01:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 25 01:18:38 2012] Source is confused with source 8 [Fri May 25 01:19:19 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting [Fri May 25 01:19:19 2012] Initial guess for spatial extent in simple fitting = 7.70" [Fri May 25 01:19:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.214 [Fri May 25 01:19:19 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.70" [Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src29.ximg exists [Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src29_1.ximg exists [Fri May 25 04:00:39 2012] Fit fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src29 appears to have run properly [Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Fri May 25 04:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src29.csv [Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Fri May 25 04:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src29.csv [Fri May 25 04:00:40 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 25 11:03:37 2012] Source 38 is offset by 5.562125 and -4.217612 pixels which is larger than 2 X fitted extent = 0.895568 x 0.895568, not incorporating fit results [Fri May 25 11:03:37 2012] Spatial fit model total counts = 11591.000000, observed total counts = 8051.000000 [Fri May 25 11:03:37 2012] Poor agreement between spatial fit and data for source 38 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 25 11:03:37 2012] Source 38 is offset by -0.771875 and 7.325188 pixels which is larger than 2 X fitted extent = 6.732046 x 3.788147, not incorporating fit results [Fri May 25 11:03:37 2012] Warning, spatial fit 29 centroid is now closest to src. 42 [Fri May 25 11:03:37 2012] Source 38 is offset by 9.029344 and 2.093054 pixels which is larger than 2 X fitted extent = 1.616993 x 1.616993, not incorporating fit results [Fri May 25 11:03:37 2012] Vigneting correction estimate = 1.000000 [Fri May 25 11:03:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 11:03:37 2012] Assessing source extent using major [Fri May 25 11:03:37 2012] Source does appear to be extended [Fri May 25 11:03:37 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 25 11:04:34 2012] XMMSAS src. selection expression = ellipse(28028.718903, 28106.253723, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 25 11:04:34 2012] Writing source region out to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src38_src.reg [Fri May 25 11:04:34 2012] Extracting stamp from image fullrun_pn_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (285, 286) - (360, 361) [Fri May 25 11:04:34 2012] XMMSAS bgd. selection expression = annulus(28028.718903, 28106.253723, 1087.500000, 2175.000000, X, Y) && !ellipse(27010.544373, 29531.643372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27751.613495, 29083.065552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.939545, 29019.793549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28574.991180, 28052.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.583740, 27860.836090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.697800, 27603.729200, 585.686417, 585.686417, 0.000000, X, Y) && !ellipse(30532.621277, 27093.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.539420, 27446.069200, 803.728023, 803.728023, 0.000000, X, Y) && !ellipse(27935.552000, 27543.120000, 1156.632033, 1156.632033, 0.000000, X, Y) && !ellipse(23179.476000, 31563.188000, 3055.040088, 3055.040088, 0.000000, X, Y) && !ellipse(25137.317657, 31004.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.922000, 29994.728000, 1305.144038, 1305.144038, 0.000000, X, Y) && !ellipse(26165.478000, 30383.504400, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(25566.317291, 29460.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26388.980774, 29183.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.789429, 28924.100983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26760.929138, 27275.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.452000, 26661.806000, 1228.904035, 1228.904035, 0.000000, X, Y) && !ellipse(31045.766754, 26308.087341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.392600, 26694.945600, 1253.328036, 763.578422, 29.576000, X, Y) && !ellipse(30275.604000, 26302.626000, 2015.360058, 2015.360058, 0.000000, X, Y) && !ellipse(29706.970000, 26207.470000, 2457.808071, 2457.808071, 0.000000, X, Y) [Fri May 25 11:04:34 2012] Writing fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src38.gif [Fri May 25 11:59:01 2012] Mean detx,y = (1143.28, -516.15) [Fri May 25 11:59:03 2012] Setting backscal keywords in source and bgd. spectrum [Fri May 25 11:59:25 2012] Binned source spectrum to 10 counts/bin [Fri May 25 11:59:26 2012] Setting source spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Fri May 25 11:59:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src38_bgd.pi.gz [Fri May 25 13:47:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 25 13:47:46 2012] rmf not generated due to insufficient counts [Sun May 27 23:01:34 2012] Updating aperture counts using extracted products [Sun May 27 23:01:34 2012] Error reading totcts from fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Sun May 27 23:01:35 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 27 23:01:35 2012] Using photon index=1.80, rate=0.0249, arf fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src38.arf [Sun May 27 23:01:35 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 27 23:01:35 2012] Updating source flux to 6.4e-14 [Sun May 27 23:15:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting