[Thu May 24 13:25:56 2012] Detection parameters:
  Position = (227.2, 354.8) = 8 49 32.74 -45 36 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.2 +/- 31.1
  Background counts = 406.7
  Rate = 0.01 +/- 0.003

[Thu May 24 13:25:57 2012] Off-axis axis estimate = 6.59'
[Thu May 24 13:31:38 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:31:38 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Thu May 24 13:31:38 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.203
[Thu May 24 13:31:38 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.72"
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src26.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src26.csv
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src26.csv
[Thu May 24 17:22:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu May 24 17:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu May 24 17:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu May 24 17:22:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:38 2012] Warning, spatial fit 26 centroid is now closest to src. 21
[Fri May 25 01:18:38 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:38 2012] Assessing source extent using major
[Fri May 25 01:18:38 2012] Source does appear to be extended
[Fri May 25 01:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:19:19 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Fri May 25 01:19:19 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Fri May 25 01:19:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.203
[Fri May 25 01:19:19 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.72"
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src21.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src21.csv
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src21.csv
[Fri May 25 04:00:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri May 25 04:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri May 25 04:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May 25 04:00:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:03:37 2012] Source 30 is offset by 6.644184 and -0.978926 pixels which is larger than
2 X fitted extent = 1.052207 x 1.052207, not incorporating fit results
[Fri May 25 11:03:37 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:37 2012] Assessing source extent using major
[Fri May 25 11:03:37 2012] Source does appear to be extended
[Fri May 25 11:03:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 11:04:33 2012] XMMSAS src. selection expression = ellipse(19720.422012, 30822.000885, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 11:04:33 2012] Writing source region out to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src30_src.reg
[Fri May 25 11:04:33 2012] Extracting stamp from image fullrun_pn_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (190, 317) - (265, 392)
[Fri May 25 11:04:33 2012] XMMSAS bgd. selection expression = annulus(19720.422012, 30822.000885, 1087.500000, 2175.000000, X, Y) && !ellipse(21583.158364, 30484.388755, 467.220898, 433.510593, 57.632409, X, Y) && !ellipse(20574.048447, 29780.786011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22542.194600, 31266.592000, 1424.936041, 1424.936041, 0.000000, X, Y) && !ellipse(23179.476000, 31563.188000, 3055.040088, 3055.040088, 0.000000, X, Y) && !ellipse(21951.196000, 32652.032000, 1485.816043, 1485.816043, 0.000000, X, Y) && !ellipse(22343.698000, 31934.302000, 1527.520044, 1527.520044, 0.000000, X, Y) && !ellipse(22654.214783, 31954.147858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23082.454000, 31678.986000, 1486.104043, 1486.104043, 0.000000, X, Y) && !ellipse(20199.296371, 30213.930145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21304.360718, 29154.894714, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 11:04:33 2012] Writing fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src30.gif
[Fri May 25 11:45:31 2012] Mean detx,y = (-6958.26, -3699.13) 
[Fri May 25 11:45:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 11:46:04 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 11:46:04 2012] Setting source spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri May 25 11:46:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri May 25 13:40:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 25 13:40:13 2012] rmf not generated due to insufficient counts
[Sun May 27 23:01:34 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:34 2012] Error reading totcts from fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun May 27 23:01:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:35 2012] Using photon index=1.80, rate=0.014, arf fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src30.arf
[Sun May 27 23:01:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:35 2012] Updating source flux to 6.3e-14
[Sun May 27 23:15:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting