[Thu May 24 13:25:55 2012] Detection parameters:
  Position = (213.3, 404.2) = 8 49 38.48 -45 32 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.9 +/- 18.6
  Background counts = 256.5
  Rate = 0.004 +/- 0.0008

[Thu May 24 13:25:57 2012] Off-axis axis estimate = 9.84'
[Thu May 24 13:31:38 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:31:38 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Thu May 24 13:31:38 2012] source mask rpix=2.6, npix_max = 38, mask sum = 28, frac = 0.724
[Thu May 24 13:31:38 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.35"
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src14.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src14.csv
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src14.csv
[Thu May 24 17:22:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu May 24 17:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu May 24 17:22:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 24 17:22:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:38 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.164522 pixels away
[Fri May 25 01:18:38 2012] Source 18 is offset by 2.792211 and -2.323130 pixels which is larger than
2 X fitted extent = 1.311706 x 1.311706, not incorporating fit results
[Fri May 25 01:18:38 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:38 2012] Assessing source extent using major
[Fri May 25 01:18:38 2012] Source does appear to be extended
[Fri May 25 01:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:18:38 2012] Deleting source due to low Poisson probability 0.9