[Thu May 24 13:25:55 2012] Detection parameters:
  Position = (258.5, 353.9) = 8 49 19.77 -45 36 14.2
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 358.8 +/- 59.4
  Background counts = 1938.7
  Rate = 0.03 +/- 0.005

[Thu May 24 13:25:57 2012] Off-axis axis estimate = 4.95'
[Thu May 24 13:31:38 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:31:38 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Thu May 24 13:31:38 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.886
[Thu May 24 13:31:38 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.91"
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src13.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src13.csv
[Thu May 24 17:22:24 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu May 24 17:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src13.csv
[Thu May 24 17:22:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu May 24 17:22:26 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May 24 17:22:26 2012] Fit fullrun_pn_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri May 25 01:18:38 2012] Spatial fit model total counts = 5925.150000, observed total counts = 5554.000000
[Fri May 25 01:18:38 2012] Offset between fit and detection position for source 16 = 6.162999 pixels
[Fri May 25 01:18:38 2012] 4808.499100 total counts/ 21.169100 bgd. counts: snr = 1040.500200
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 6.162999 pixels
  Position = (259.7, 359.9) = 8 49 19.29 -45 36 0.8
  Extent = 17.8 (17.8-35.6)", rotation angle = 0
  Source counts = 4787.3 +/- 69.3
  Background counts = 21.2
  Rate = 0.2 +/- 0.003
[Fri May 25 01:18:38 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:38 2012] Assessing source extent using major axis lower bound
[Fri May 25 01:18:38 2012] Source does appear to be extended
[Fri May 25 01:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:18:38 2012] Source is confused with source 24
[Fri May 25 01:18:38 2012] Source is confused with source 25
[Fri May 25 01:18:38 2012] Source is confused with source 26
[Fri May 25 01:18:38 2012] Source is confused with source 27
[Fri May 25 01:19:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 01:19:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 01:19:19 2012] Initial guess for spatial extent in simple fitting = 17.81"
[Fri May 25 01:19:19 2012] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.959
[Fri May 25 01:19:19 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 17.81"
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src12.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src12.csv
[Fri May 25 04:00:39 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May 25 04:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src12.csv
[Fri May 25 04:00:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May 25 04:00:40 2012] fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 25 04:00:40 2012] Fit fullrun_pn_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri May 25 11:03:37 2012] Warning, spatial fit 12 centroid is now closest to src. 17
[Fri May 25 11:03:37 2012] Source 16 is offset by 1.172030 and -2.547540 pixels which is larger than
2 X fitted extent = 1.063609 x 1.063609, not incorporating fit results
[Fri May 25 11:03:37 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:37 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:03:37 2012] Source does appear to be extended
[Fri May 25 11:03:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 11:04:32 2012] Counts = 4787.330000, rescaling region sizes by 2.000000
[Fri May 25 11:04:32 2012] XMMSAS src. selection expression = ellipse(22542.194600, 31266.592000, 2137.404062, 2137.404062, 0.000000, X, Y)
[Fri May 25 11:04:32 2012] Writing source region out to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src16_src.reg
[Fri May 25 11:04:32 2012] Extracting stamp from image fullrun_pn_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (137, 237) - (383, 483)
[Fri May 25 11:04:32 2012] XMMSAS bgd. selection expression = annulus(22542.194600, 31266.592000, 7124.680205, 14249.360410, X, Y) && !ellipse(21583.158364, 30484.388755, 467.220898, 433.510593, 57.632409, X, Y) && !ellipse(24766.747253, 30399.463593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20574.048447, 29780.786011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.544373, 29531.643372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26426.890000, 19360.076000, 355.520810, 355.520810, 0.000000, X, Y) && !ellipse(27751.613495, 29083.065552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.939545, 29019.793549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28574.991180, 28052.900909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.583740, 27860.836090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.697800, 27603.729200, 585.686417, 585.686417, 0.000000, X, Y) && !ellipse(30532.621277, 27093.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28417.539420, 27446.069200, 803.728023, 803.728023, 0.000000, X, Y) && !ellipse(27935.552000, 27543.120000, 1156.632033, 1156.632033, 0.000000, X, Y) && !ellipse(13490.420990, 24414.836395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23179.476000, 31563.188000, 3055.040088, 3055.040088, 0.000000, X, Y) && !ellipse(21951.196000, 32652.032000, 1485.816043, 1485.816043, 0.000000, X, Y) && !ellipse(22343.698000, 31934.302000, 1527.520044, 1527.520044, 0.000000, X, Y) && !ellipse(23179.913239, 32118.653473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22654.214783, 31954.147858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23082.454000, 31678.986000, 1486.104043, 1486.104043, 0.000000, X, Y) && !ellipse(25137.317657, 31004.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25783.696160, 30879.153800, 510.124815, 510.124815, 0.000000, X, Y) && !ellipse(19720.422012, 30822.000885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.922000, 29994.728000, 1305.144038, 1305.144038, 0.000000, X, Y) && !ellipse(20199.296371, 30213.930145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.478000, 30383.504400, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(25566.317291, 29460.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26388.980774, 29183.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21304.360718, 29154.894714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.789429, 28924.100983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28028.718903, 28106.253723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26760.929138, 27275.242828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.452000, 26661.806000, 1228.904035, 1228.904035, 0.000000, X, Y) && !ellipse(31045.766754, 26308.087341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.392600, 26694.945600, 1253.328036, 763.578422, 29.576000, X, Y) && !ellipse(30275.604000, 26302.626000, 2015.360058, 2015.360058, 0.000000, X, Y) && !ellipse(29706.970000, 26207.470000, 2457.808071, 2457.808071, 0.000000, X, Y) && !ellipse(31527.782013, 25449.477417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31324.560760, 24935.142487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32193.150940, 24552.627106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32654.833984, 24143.266724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33277.524000, 23507.830000, 1594.120046, 1594.120046, 0.000000, X, Y) && !ellipse(25891.221191, 22936.165619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33877.265228, 22987.264313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34261.888000, 22462.468000, 1594.120046, 1594.120046, 0.000000, X, Y) && !ellipse(35178.967682, 21757.505188, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 25 11:04:32 2012] Writing fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src16.gif
[Fri May 25 11:16:08 2012] Mean detx,y = (-4331.18, -3968.76) 
[Fri May 25 11:16:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 11:25:40 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 11:25:40 2012] Setting source spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri May 25 11:25:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun May 27 23:01:34 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:34 2012] Error reading totcts from fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun May 27 23:01:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:35 2012] Using photon index=1.80, rate=0.208, arf fullrun_pn_xmm0112870301_pi300-10000_pass1_cl_src16.arf
[Sun May 27 23:01:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:35 2012] Updating source flux to 6.4e-13
[Sun May 27 23:15:00 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Sun May 27 23:15:00 2012] Flag c found in src. 16 procflags, skipping spectral fitting