[Thu May 24 13:27:12 2012] Detection parameters: Position = (387.0, 268.8) = 8 48 26.46 -45 42 35.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 91.3 +/- 18.6 Background counts = 122.8 Rate = 0.004 +/- 0.0008 [Thu May 24 13:27:13 2012] Off-axis axis estimate = 6.77' [Thu May 24 21:19:13 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting [Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 9.81" [Thu May 24 21:19:13 2012] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.152 [Thu May 24 21:19:13 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.81" [Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src61.ximg exists [Fri May 25 01:18:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src61.csv [Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src61_1.ximg exists [Fri May 25 01:18:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src61.csv [Fri May 25 01:18:23 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src61_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 25 01:18:25 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists [Fri May 25 01:18:25 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists [Fri May 25 01:18:25 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly [Fri May 25 01:19:03 2012] Spatial fit model total counts = 2248.060000, observed total counts = 2243.000000 [Fri May 25 01:19:03 2012] Offset between fit and detection position for source 64 = 7.078592 pixels [Fri May 25 01:19:03 2012] Warning, changing simple spatial fit ID from 61 to 36 [Fri May 25 01:19:03 2012] 2165.117000 total counts/ 1530.190000 bgd. counts: snr = 16.231218 Spatial fit parameters: Offset between fit and detection position for source 64 = 7.078592 pixels Position = (382.1, 274.0) = 8 48 28.49 -45 42 14.6 Extent = 18.9 (18.9-37.8)", rotation angle = 0 Source counts = 634.9 +/- 46.5 Background counts = 1530.2 Rate = 0.02 +/- 0.001 [Fri May 25 01:19:03 2012] Spatial fit model total counts = 1883.180000, observed total counts = 1858.000000 [Fri May 25 01:19:03 2012] Offset between fit and detection position for source 64 = 2.068734 pixels [Fri May 25 01:19:03 2012] Warning, changing simple spatial fit ID from 36 to 61 [Fri May 25 01:19:03 2012] 1815.086000 total counts/ 1274.600000 bgd. counts: snr = 15.139011 Spatial fit parameters: Offset between fit and detection position for source 64 = 2.068734 pixels Position = (380.1, 274.4) = 8 48 29.32 -45 42 12.5 Extent = 19.5 (19.3-19.6)", rotation angle = 0 Source counts = 540.5 +/- 42.6 Background counts = 1274.6 Rate = 0.02 +/- 0.001 [Fri May 25 01:19:03 2012] Vigneting correction estimate = 1.000000 [Fri May 25 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 01:19:03 2012] Assessing source extent using major axis lower bound [Fri May 25 01:19:03 2012] Source does appear to be extended [Fri May 25 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 25 01:19:03 2012] Source is confused with source 63 [Fri May 25 07:15:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 25 07:15:35 2012] Initial guess for spatial extent in simple fitting = 19.50" [Fri May 25 07:15:35 2012] source mask rpix=4.5, npix_max = 99, mask sum = 100, frac = 1.007 [Fri May 25 07:15:35 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 19.50" [Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src49.ximg exists [Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src49_1.ximg exists [Fri May 25 11:03:17 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src49 appears to have run properly [Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src49.ximg exists [Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists [Fri May 25 11:03:20 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly [Fri May 25 11:04:09 2012] Spatial fit model total counts = 1863.140000, observed total counts = 1820.000000 [Fri May 25 11:04:09 2012] Offset between fit and detection position for source 64 = 3.185875 pixels [Fri May 25 11:04:09 2012] Warning, changing simple spatial fit ID from 49 to 37 [Fri May 25 11:04:09 2012] 1526.657000 total counts/ 1115.550000 bgd. counts: snr = 12.308648 Spatial fit parameters: Offset between fit and detection position for source 64 = 3.185875 pixels Position = (381.3, 271.5) = 8 48 28.82 -45 42 25.3 Extent = 18.3 (19.6-24.1)", rotation angle = 0 Source counts = 411.1 +/- 39.1 Background counts = 1115.5 Rate = 0.01 +/- 0.001 [Fri May 25 11:04:09 2012] Vigneting correction estimate = 1.000000 [Fri May 25 11:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 11:04:09 2012] Assessing source extent using major axis lower bound [Fri May 25 11:04:09 2012] Source does appear to be extended [Fri May 25 11:04:09 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 27 12:21:25 2012] XMMSAS src. selection expression = ellipse(33121.416000, 23570.732000, 1096.320032, 1096.320032, 0.000000, X, Y) [Sun May 27 12:21:25 2012] Writing source region out to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src64_src.reg [Sun May 27 12:21:25 2012] Extracting stamp from image fullrun_mos2_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (318, 208) - (444, 334) [Sun May 27 12:21:25 2012] XMMSAS bgd. selection expression = annulus(33121.416000, 23570.732000, 1827.200053, 3654.400105, X, Y) && !ellipse(27602.114000, 27963.872000, 2447.856070, 2447.856070, 0.000000, X, Y) && !ellipse(36020.704895, 20904.046021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28397.004000, 26750.670000, 1224.336035, 1224.336035, 0.000000, X, Y) && !ellipse(28497.484000, 28384.308000, 2746.480079, 2746.480079, 0.000000, X, Y) && !ellipse(30509.580933, 26822.424927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33341.846000, 23421.606000, 3062.464088, 3062.464088, 0.000000, X, Y) && !ellipse(33859.030000, 22894.996000, 3120.416090, 3120.416090, 0.000000, X, Y) && !ellipse(32348.428000, 24569.464000, 1442.296042, 1442.296042, 0.000000, X, Y) && !ellipse(26863.394000, 29510.522000, 2687.392077, 2687.392077, 0.000000, X, Y) && !ellipse(29275.540000, 26774.068000, 1291.296037, 1291.296037, 0.000000, X, Y) && !ellipse(31588.452087, 21423.583481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32518.550000, 24217.966000, 3195.976092, 3195.976092, 0.000000, X, Y) && !ellipse(29237.975891, 27701.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30390.184265, 25294.163513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30145.426000, 27290.555600, 1347.656039, 1347.656039, 0.000000, X, Y) && !ellipse(33512.233215, 22929.644867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30674.067963, 25895.798462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.162000, 22374.988000, 1606.792046, 1606.792046, 0.000000, X, Y) && !ellipse(35005.910217, 21628.501297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.564453, 26077.168823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.928000, 25338.068000, 2883.696083, 2883.696083, 0.000000, X, Y) && !ellipse(31668.734863, 24486.041626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32422.710083, 23705.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29112.926000, 25527.888000, 1214.672035, 1214.672035, 0.000000, X, Y) && !ellipse(31243.006000, 23406.036000, 1450.368042, 1450.368042, 0.000000, X, Y) [Sun May 27 12:21:25 2012] Writing fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src64.gif [Sun May 27 14:17:49 2012] Mean detx,y = (-5813.37, -4249.27) [Sun May 27 14:17:50 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 27 14:18:08 2012] Binned source spectrum to 10 counts/bin [Sun May 27 14:18:08 2012] Setting source spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src64_src_b10.pi.gz [Sun May 27 14:18:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src64_bgd.pi.gz [Sun May 27 23:01:38 2012] Updating aperture counts using extracted products [Sun May 27 23:01:38 2012] Error reading totcts from fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src64_src_b10.pi.gz [Sun May 27 23:01:39 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 27 23:01:39 2012] Using photon index=1.80, rate=0.0132, arf fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src64.arf [Sun May 27 23:01:39 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 27 23:01:39 2012] Updating source flux to 1.6e-13 [Sun May 27 23:08:53 2012] Flag c found in src. 64 procflags, skipping spectral fitting