[Thu May 24 13:27:12 2012] Detection parameters:
  Position = (381.3, 273.0) = 8 48 28.81 -45 42 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.5 +/- 24.4
  Background counts = 133.0
  Rate = 0.008 +/- 0.001

[Thu May 24 13:27:13 2012] Off-axis axis estimate = 6.28'
[Thu May 24 21:19:13 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Thu May 24 21:19:13 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.029
[Thu May 24 21:19:13 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.57"
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src21.csv
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src21.csv
[Fri May 25 01:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 25 01:18:24 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri May 25 01:19:03 2012] Warning, spatial fit 21 centroid is now closest to src. 60
[Fri May 25 01:19:03 2012] Spatial fit model total counts = 1709.720000, observed total counts = 1638.000000
[Fri May 25 01:19:03 2012] Offset between fit and detection position for source 63 = 4.126264 pixels
[Fri May 25 01:19:03 2012] Warning, changing simple spatial fit ID from 21 to 22
[Fri May 25 01:19:03 2012] 1651.162000 total counts/ 1397.950000 bgd. counts: snr = 6.772335
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 4.126264 pixels
  Position = (382.1, 269.0) = 8 48 28.47 -45 42 36.2
  Extent = 20.0 (19.8-20.1)", rotation angle = 0
  Source counts = 253.2 +/- 40.6
  Background counts = 1398.0
  Rate = 0.008 +/- 0.001
[Fri May 25 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:19:03 2012] Assessing source extent using major axis lower bound
[Fri May 25 01:19:03 2012] Source does appear to be extended
[Fri May 25 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:19:03 2012] Source is confused with source 66
[Fri May 25 01:19:03 2012] Source is confused with source 60
[Fri May 25 01:19:03 2012] Source is confused with source 68
[Fri May 25 01:19:03 2012] Source is confused with source 65
[Fri May 25 01:19:03 2012] Source is confused with source 64
[Fri May 25 07:15:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 07:15:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 07:15:35 2012] Initial guess for spatial extent in simple fitting = 19.98"
[Fri May 25 07:15:35 2012] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.964
[Fri May 25 07:15:35 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 19.98"
[Fri May 25 11:03:16 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src15.ximg exists
[Fri May 25 11:03:16 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri May 25 11:03:16 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src15 appears to have run properly
[Fri May 25 11:03:18 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri May 25 11:03:18 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri May 25 11:03:18 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri May 25 11:04:09 2012] Warning, spatial fit 15 centroid is now closest to src. 60
[Fri May 25 11:04:09 2012] Spatial fit model total counts = 5795.340000, observed total counts = 5802.000000
[Fri May 25 11:04:09 2012] Offset between fit and detection position for source 63 = 1.852021 pixels
[Fri May 25 11:04:09 2012] Warning, changing simple spatial fit ID from 15 to 28
[Fri May 25 11:04:09 2012] 5690.260000 total counts/ 2776.890000 bgd. counts: snr = 55.286145
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.852021 pixels
  Position = (383.8, 269.8) = 8 48 27.77 -45 42 32.8
  Extent = 38.3 (38.0-76.6)", rotation angle = 0
  Source counts = 2913.4 +/- 75.4
  Background counts = 2776.9
  Rate = 0.09 +/- 0.002
[Fri May 25 11:04:09 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:04:09 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:04:09 2012] Source does appear to be extended
[Fri May 25 11:04:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:21:23 2012] Counts = 2913.370000, rescaling region sizes by 2.000000
[Sun May 27 12:21:23 2012] XMMSAS src. selection expression = ellipse(33341.846000, 23421.606000, 4593.696132, 4593.696132, 0.000000, X, Y)
[Sun May 27 12:21:23 2012] Writing source region out to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src63_src.reg
[Sun May 27 12:21:23 2012] Extracting stamp from image fullrun_mos2_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (120, 6) - (595, 534)
[Sun May 27 12:21:23 2012] XMMSAS bgd. selection expression = annulus(33341.846000, 23421.606000, 15312.320441, 30624.640881, X, Y) && !ellipse(27602.114000, 27963.872000, 2447.856070, 2447.856070, 0.000000, X, Y) && !ellipse(36020.704895, 20904.046021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26620.801960, 29764.045200, 2632.224076, 1101.480032, 46.830000, X, Y) && !ellipse(20642.220306, 29732.047638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13502.587662, 24400.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.997345, 28658.738770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28397.004000, 26750.670000, 1224.336035, 1224.336035, 0.000000, X, Y) && !ellipse(28158.024000, 27553.704200, 1223.928035, 1223.928035, 0.000000, X, Y) && !ellipse(27782.120000, 28980.040000, 1373.240040, 1373.240040, -0.000000, X, Y) && !ellipse(28497.484000, 28384.308000, 2746.480079, 2746.480079, 0.000000, X, Y) && !ellipse(30509.580933, 26822.424927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.696000, 29751.308000, 648.057619, 648.057619, 0.000000, X, Y) && !ellipse(25442.724800, 30742.104000, 585.364817, 585.364817, 0.000000, X, Y) && !ellipse(28508.738400, 28694.731800, 497.335214, 497.335214, 0.000000, X, Y) && !ellipse(26306.832600, 30084.560000, 1285.080037, 1285.080037, 0.000000, X, Y) && !ellipse(33859.030000, 22894.996000, 3120.416090, 3120.416090, 0.000000, X, Y) && !ellipse(32348.428000, 24569.464000, 1442.296042, 1442.296042, 0.000000, X, Y) && !ellipse(24698.966000, 30266.366000, 2700.880078, 2700.880078, 0.000000, X, Y) && !ellipse(19990.734528, 30812.851654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21556.658800, 30472.109800, 311.085609, 311.085609, 0.000000, X, Y) && !ellipse(26863.394000, 29510.522000, 2687.392077, 2687.392077, 0.000000, X, Y) && !ellipse(29275.540000, 26774.068000, 1291.296037, 1291.296037, 0.000000, X, Y) && !ellipse(24343.370000, 30502.371200, 1275.640037, 1275.640037, 0.000000, X, Y) && !ellipse(25639.098000, 30162.430000, 920.232026, 920.232026, 0.000000, X, Y) && !ellipse(24996.818817, 30755.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.487671, 28499.723755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31588.452087, 21423.583481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32518.550000, 24217.966000, 3195.976092, 3195.976092, 0.000000, X, Y) && !ellipse(24608.079400, 31472.017400, 612.444818, 612.444818, 0.000000, X, Y) && !ellipse(25318.868561, 30312.824677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21137.050000, 32574.416000, 1549.376045, 1248.000036, 246.119000, X, Y) && !ellipse(29237.975891, 27701.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30390.184265, 25294.163513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30145.426000, 27290.555600, 1347.656039, 1347.656039, 0.000000, X, Y) && !ellipse(27814.208466, 26329.675385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.916000, 31590.396000, 2922.416084, 2922.416084, 0.000000, X, Y) && !ellipse(22429.368000, 32086.442000, 1461.208042, 1461.208042, 0.000000, X, Y) && !ellipse(33512.233215, 22929.644867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30674.067963, 25895.798462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.162000, 22374.988000, 1606.792046, 1606.792046, 0.000000, X, Y) && !ellipse(35005.910217, 21628.501297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36947.323395, 34036.513885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.564453, 26077.168823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.928000, 25338.068000, 2883.696083, 2883.696083, 0.000000, X, Y) && !ellipse(22938.440979, 30934.821045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31668.734863, 24486.041626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.290000, 31370.934000, 2837.952082, 2837.952082, 0.000000, X, Y) && !ellipse(26117.971313, 29453.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32422.710083, 23705.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.416000, 23570.732000, 1461.760042, 1461.760042, 0.000000, X, Y) && !ellipse(29112.926000, 25527.888000, 1214.672035, 1214.672035, 0.000000, X, Y) && !ellipse(14696.003418, 36415.752014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31243.006000, 23406.036000, 1450.368042, 1450.368042, 0.000000, X, Y) && !ellipse(20745.754000, 33425.646000, 1580.488045, 1580.488045, 0.000000, X, Y)
[Sun May 27 12:21:23 2012] Writing fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src63.gif
[Sun May 27 12:56:03 2012] Mean detx,y = (-5417.20, -4082.10) 
[Sun May 27 12:56:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 13:04:29 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 13:04:29 2012] Setting source spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun May 27 13:04:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sun May 27 23:01:38 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:38 2012] Error reading totcts from fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun May 27 23:01:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:39 2012] Using photon index=1.80, rate=0.0935, arf fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src63.arf
[Sun May 27 23:01:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:39 2012] Updating source flux to 9.9e-13
[Sun May 27 23:08:53 2012] Flag c found in src. 63 procflags, skipping spectral fitting