[Thu May 24 13:27:12 2012] Detection parameters:
  Position = (364.6, 282.0) = 8 48 35.76 -45 41 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.6 +/- 22.3
  Background counts = 170.5
  Rate = 0.004 +/- 0.0008

[Thu May 24 13:27:13 2012] Off-axis axis estimate = 4.94'
[Thu May 24 21:19:13 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu May 24 21:19:13 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.157
[Thu May 24 21:19:13 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 8.90"
[Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src57.ximg exists
[Fri May 25 01:18:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src57.csv
[Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri May 25 01:18:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src57.csv
[Fri May 25 01:18:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:25 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri May 25 01:18:25 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri May 25 01:18:25 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Fri May 25 01:19:03 2012] Warning, spatial fit 57 centroid is now closest to src. 57
[Fri May 25 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:19:03 2012] Assessing source extent using major
[Fri May 25 01:19:03 2012] Source does appear to be extended
[Fri May 25 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:19:03 2012] Source is confused with source 59
[Fri May 25 07:15:35 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:15:35 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Fri May 25 07:15:35 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.157
[Fri May 25 07:15:35 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 8.90"
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src45.ximg exists
[Fri May 25 11:03:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src45.csv
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri May 25 11:03:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src45.csv
[Fri May 25 11:03:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri May 25 11:03:19 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Fri May 25 11:04:09 2012] Warning, spatial fit 45 centroid is now closest to src. 65
[Fri May 25 11:04:09 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:04:09 2012] Assessing source extent using major
[Fri May 25 11:04:09 2012] Source does appear to be extended
[Fri May 25 11:04:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:21:25 2012] XMMSAS src. selection expression = ellipse(31668.734863, 24486.041626, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 12:21:25 2012] Writing source region out to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src61_src.reg
[Sun May 27 12:21:25 2012] Extracting stamp from image fullrun_mos2_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (327, 245) - (402, 320)
[Sun May 27 12:21:25 2012] XMMSAS bgd. selection expression = annulus(31668.734863, 24486.041626, 1087.500000, 2175.000000, X, Y) && !ellipse(27602.114000, 27963.872000, 2447.856070, 2447.856070, 0.000000, X, Y) && !ellipse(28397.004000, 26750.670000, 1224.336035, 1224.336035, 0.000000, X, Y) && !ellipse(28497.484000, 28384.308000, 2746.480079, 2746.480079, 0.000000, X, Y) && !ellipse(30509.580933, 26822.424927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33341.846000, 23421.606000, 3062.464088, 3062.464088, 0.000000, X, Y) && !ellipse(33859.030000, 22894.996000, 3120.416090, 3120.416090, 0.000000, X, Y) && !ellipse(32348.428000, 24569.464000, 1442.296042, 1442.296042, 0.000000, X, Y) && !ellipse(29275.540000, 26774.068000, 1291.296037, 1291.296037, 0.000000, X, Y) && !ellipse(32518.550000, 24217.966000, 3195.976092, 3195.976092, 0.000000, X, Y) && !ellipse(30390.184265, 25294.163513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30145.426000, 27290.555600, 1347.656039, 1347.656039, 0.000000, X, Y) && !ellipse(33512.233215, 22929.644867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30674.067963, 25895.798462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.162000, 22374.988000, 1606.792046, 1606.792046, 0.000000, X, Y) && !ellipse(28847.564453, 26077.168823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.928000, 25338.068000, 2883.696083, 2883.696083, 0.000000, X, Y) && !ellipse(32422.710083, 23705.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.416000, 23570.732000, 1461.760042, 1461.760042, 0.000000, X, Y) && !ellipse(29112.926000, 25527.888000, 1214.672035, 1214.672035, 0.000000, X, Y) && !ellipse(31243.006000, 23406.036000, 1450.368042, 1450.368042, 0.000000, X, Y)
[Sun May 27 12:21:25 2012] Writing fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src61.gif
[Sun May 27 14:07:50 2012] Mean detx,y = (-4512.45, -3254.95) 
[Sun May 27 14:07:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 14:08:01 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 14:08:02 2012] Setting source spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun May 27 14:08:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sun May 27 22:37:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 22:37:56 2012] rmf not generated due to insufficient counts
[Sun May 27 23:01:38 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:38 2012] Error reading totcts from fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun May 27 23:01:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:39 2012] Using photon index=1.80, rate=0.0044, arf fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src61.arf
[Sun May 27 23:01:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:39 2012] Updating source flux to 5.3e-14
[Sun May 27 23:08:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting