[Thu May 24 13:27:12 2012] Detection parameters:
  Position = (363.6, 293.0) = 8 48 36.15 -45 40 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.6 +/- 27.2
  Background counts = 175.5
  Rate = 0.009 +/- 0.001

[Thu May 24 13:27:13 2012] Off-axis axis estimate = 4.74'
[Thu May 24 21:19:13 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Thu May 24 21:19:13 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.178
[Thu May 24 21:19:13 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.80"
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src13.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src13.csv
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src13.csv
[Fri May 25 01:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 25 01:18:24 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri May 25 01:19:02 2012] Spatial fit model total counts = 2838.010000, observed total counts = 2837.000000
[Fri May 25 01:19:02 2012] Offset between fit and detection position for source 53 = 0.926942 pixels
[Fri May 25 01:19:02 2012] 2752.659000 total counts/ 2606.210000 bgd. counts: snr = 2.868677
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.926942 pixels
  Position = (363.2, 293.8) = 8 48 36.33 -45 40 48.2
  Extent = 8.6 (5.6-13.0)", rotation angle = 0
  Source counts = 146.4 +/- 52.5
  Background counts = 2606.2
  Rate = 0.005 +/- 0.002
[Fri May 25 01:19:03 2012] Spatial fit model total counts = 2914.590000, observed total counts = 2923.000000
[Fri May 25 01:19:03 2012] Offset between fit and detection position for source 53 = 0.898305 pixels
[Fri May 25 01:19:03 2012] Warning, changing simple spatial fit ID from 13 to 47
[Fri May 25 01:19:03 2012] 2799.920600 total counts/ 2712.860000 bgd. counts: snr = 1.671506
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.898305 pixels
  Position = (363.4, 292.9) = 8 48 36.27 -45 40 52.1
  Extent = 6.4 (3.2-10.7)", rotation angle = 0
  Source counts = 87.1 +/- 52.9
  Background counts = 2712.9
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability