[Thu May 24 13:27:12 2012] Detection parameters:
  Position = (351.5, 313.0) = 8 48 41.20 -45 39 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.6 +/- 23.0
  Background counts = 192.0
  Rate = 0.005 +/- 0.0008

[Thu May 24 13:27:13 2012] Off-axis axis estimate = 3.99'
[Thu May 24 21:19:13 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Thu May 24 21:19:13 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842
[Thu May 24 21:19:13 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.42"
[Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src45.ximg exists
[Fri May 25 01:18:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src45.csv
[Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri May 25 01:18:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src45.csv
[Fri May 25 01:18:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri May 25 01:18:25 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Fri May 25 01:19:03 2012] Source 43 is offset by -5.879716 and -7.251462 pixels which is larger than
2 X fitted extent = 0.968147 x 0.968147, not incorporating fit results
[Fri May 25 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:19:03 2012] Assessing source extent using major
[Fri May 25 01:19:03 2012] Source does appear to be extended
[Fri May 25 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:19:03 2012] Source is confused with source 45
[Fri May 25 07:15:35 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:15:35 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Fri May 25 07:15:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.842
[Fri May 25 07:15:35 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 8.42"
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src34.ximg exists
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri May 25 11:03:17 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src34 appears to have run properly
[Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri May 25 11:03:19 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri May 25 11:04:09 2012] Spatial fit model total counts = 3025.830000, observed total counts = 3034.000000
[Fri May 25 11:04:09 2012] Offset between fit and detection position for source 43 = 5.012959 pixels
[Fri May 25 11:04:09 2012] Warning, changing simple spatial fit ID from 34 to 10
[Fri May 25 11:04:09 2012] 2891.270000 total counts/ 2584.940000 bgd. counts: snr = 6.025101
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 5.012959 pixels
  Position = (347.6, 316.1) = 8 48 42.82 -45 39 11.4
  Extent = 16.8 (16.7-33.5)", rotation angle = 0
  Source counts = 306.3 +/- 53.8
  Background counts = 2584.9
  Rate = 0.01 +/- 0.002
[Fri May 25 11:04:09 2012] Spatial fit model total counts = 2720.760000, observed total counts = 2706.000000
[Fri May 25 11:04:09 2012] Offset between fit and detection position for source 43 = 1.952431 pixels
[Fri May 25 11:04:09 2012] Warning, changing simple spatial fit ID from 10 to 34
[Fri May 25 11:04:09 2012] 2622.263000 total counts/ 2318.660000 bgd. counts: snr = 6.305035
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.952431 pixels
  Position = (347.1, 314.2) = 8 48 43.05 -45 39 19.5
  Extent = 16.8 (16.8-33.7)", rotation angle = 0
  Source counts = 303.6 +/- 51.2
  Background counts = 2318.7
  Rate = 0.01 +/- 0.002
[Fri May 25 11:04:09 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:04:09 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:04:09 2012] Source does appear to be extended
[Fri May 25 11:04:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:21:24 2012] XMMSAS src. selection expression = ellipse(30145.426000, 27290.555600, 1010.742029, 1010.742029, 0.000000, X, Y)
[Sun May 27 12:21:24 2012] Writing source region out to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src43_src.reg
[Sun May 27 12:21:24 2012] Extracting stamp from image fullrun_mos2_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (289, 256) - (405, 372)
[Sun May 27 12:21:24 2012] XMMSAS bgd. selection expression = annulus(30145.426000, 27290.555600, 1684.570048, 3369.140097, X, Y) && !ellipse(27602.114000, 27963.872000, 2447.856070, 2447.856070, 0.000000, X, Y) && !ellipse(26620.801960, 29764.045200, 2632.224076, 1101.480032, 46.830000, X, Y) && !ellipse(27312.997345, 28658.738770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28397.004000, 26750.670000, 1224.336035, 1224.336035, 0.000000, X, Y) && !ellipse(28158.024000, 27553.704200, 1223.928035, 1223.928035, 0.000000, X, Y) && !ellipse(27782.120000, 28980.040000, 1373.240040, 1373.240040, -0.000000, X, Y) && !ellipse(28497.484000, 28384.308000, 2746.480079, 2746.480079, 0.000000, X, Y) && !ellipse(30509.580933, 26822.424927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.696000, 29751.308000, 648.057619, 648.057619, 0.000000, X, Y) && !ellipse(28508.738400, 28694.731800, 497.335214, 497.335214, 0.000000, X, Y) && !ellipse(26306.832600, 30084.560000, 1285.080037, 1285.080037, 0.000000, X, Y) && !ellipse(33341.846000, 23421.606000, 3062.464088, 3062.464088, 0.000000, X, Y) && !ellipse(33859.030000, 22894.996000, 3120.416090, 3120.416090, 0.000000, X, Y) && !ellipse(32348.428000, 24569.464000, 1442.296042, 1442.296042, 0.000000, X, Y) && !ellipse(24698.966000, 30266.366000, 2700.880078, 2700.880078, 0.000000, X, Y) && !ellipse(26863.394000, 29510.522000, 2687.392077, 2687.392077, 0.000000, X, Y) && !ellipse(29275.540000, 26774.068000, 1291.296037, 1291.296037, 0.000000, X, Y) && !ellipse(26661.487671, 28499.723755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32518.550000, 24217.966000, 3195.976092, 3195.976092, 0.000000, X, Y) && !ellipse(29237.975891, 27701.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30390.184265, 25294.163513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27814.208466, 26329.675385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30674.067963, 25895.798462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.162000, 22374.988000, 1606.792046, 1606.792046, 0.000000, X, Y) && !ellipse(28847.564453, 26077.168823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.928000, 25338.068000, 2883.696083, 2883.696083, 0.000000, X, Y) && !ellipse(31668.734863, 24486.041626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.290000, 31370.934000, 2837.952082, 2837.952082, 0.000000, X, Y) && !ellipse(26117.971313, 29453.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32422.710083, 23705.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.416000, 23570.732000, 1461.760042, 1461.760042, 0.000000, X, Y) && !ellipse(29112.926000, 25527.888000, 1214.672035, 1214.672035, 0.000000, X, Y) && !ellipse(31243.006000, 23406.036000, 1450.368042, 1450.368042, 0.000000, X, Y)
[Sun May 27 12:21:24 2012] Writing fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src43.gif
[Sun May 27 13:47:01 2012] Mean detx,y = (-2984.44, -486.36) 
[Sun May 27 13:47:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 13:47:19 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 13:47:19 2012] Setting source spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun May 27 13:47:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun May 27 23:01:38 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:38 2012] Error reading totcts from fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun May 27 23:01:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:39 2012] Using photon index=1.80, rate=0.00975, arf fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src43.arf
[Sun May 27 23:01:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:39 2012] Updating source flux to 9.3e-14
[Sun May 27 23:08:53 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Sun May 27 23:08:53 2012] Flag c found in src. 43 procflags, skipping spectral fitting