[Thu May 24 13:27:11 2012] Detection parameters:
  Position = (323.8, 332.7) = 8 48 52.69 -45 37 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.2 +/- 29.4
  Background counts = 203.3
  Rate = 0.009 +/- 0.001

[Thu May 24 13:27:13 2012] Off-axis axis estimate = 3.09'
[Thu May 24 21:19:13 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Thu May 24 21:19:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.148
[Thu May 24 21:19:13 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.97"
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src10.csv
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src10.csv
[Fri May 25 01:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 25 01:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 25 01:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 25 01:18:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:19:02 2012] Spatial fit model total counts = 21299.900000, observed total counts = 2847.000000
[Fri May 25 01:19:02 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 25 01:19:02 2012] Spatial fit model total counts = 3558.930000, observed total counts = 3298.000000
[Fri May 25 01:19:02 2012] Offset between fit and detection position for source 33 = 4.047779 pixels
[Fri May 25 01:19:02 2012] Warning, changing simple spatial fit ID from 10 to 15
[Fri May 25 01:19:02 2012] 3470.272000 total counts/ 3132.810000 bgd. counts: snr = 6.029174
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 4.047779 pixels
  Position = (319.9, 333.7) = 8 48 54.32 -45 37 55.2
  Extent = 17.2" x 17.2", rotation angle = -0
  Source counts = 337.5 +/- 58.9
  Background counts = 3132.8
  Rate = 0.01 +/- 0.002
[Fri May 25 01:19:03 2012] Source 33 is offset by 1.315655 and 1.084851 pixels which is larger than
2 X fitted extent = 0.947067 x 0.947067, not incorporating fit results
[Fri May 25 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:19:03 2012] Assessing source extent using major
[Fri May 25 01:19:03 2012] Source does appear to be extended
[Fri May 25 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:19:03 2012] Source is confused with source 34
[Fri May 25 07:15:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 07:15:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 07:15:35 2012] Initial guess for spatial extent in simple fitting = 17.17"
[Fri May 25 07:15:35 2012] source mask rpix=3.9, npix_max = 79, mask sum = 46, frac = 0.582
[Fri May 25 07:15:35 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 17.17"
[Fri May 25 11:03:16 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 25 11:03:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src8.csv
[Fri May 25 11:03:16 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 25 11:03:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src8.csv
[Fri May 25 11:03:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 25 11:03:17 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri May 25 11:04:09 2012] Warning, spatial fit 8 centroid is now closest to src. 40
[Fri May 25 11:04:09 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:04:09 2012] Assessing source extent using major
[Fri May 25 11:04:09 2012] Source does appear to be extended
[Fri May 25 11:04:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:21:23 2012] XMMSAS src. selection expression = ellipse(27782.120000, 28980.040000, 1029.930030, 1029.930030, -0.000000, X, Y)
[Sun May 27 12:21:23 2012] Writing source region out to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src33_src.reg
[Sun May 27 12:21:23 2012] Extracting stamp from image fullrun_mos2_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (261, 274) - (379, 393)
[Sun May 27 12:21:23 2012] XMMSAS bgd. selection expression = annulus(27782.120000, 28980.040000, 1716.550049, 3433.100099, X, Y) && !ellipse(27602.114000, 27963.872000, 2447.856070, 2447.856070, 0.000000, X, Y) && !ellipse(26620.801960, 29764.045200, 2632.224076, 1101.480032, 46.830000, X, Y) && !ellipse(27312.997345, 28658.738770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28397.004000, 26750.670000, 1224.336035, 1224.336035, 0.000000, X, Y) && !ellipse(28158.024000, 27553.704200, 1223.928035, 1223.928035, 0.000000, X, Y) && !ellipse(28497.484000, 28384.308000, 2746.480079, 2746.480079, 0.000000, X, Y) && !ellipse(30509.580933, 26822.424927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.696000, 29751.308000, 648.057619, 648.057619, 0.000000, X, Y) && !ellipse(25442.724800, 30742.104000, 585.364817, 585.364817, 0.000000, X, Y) && !ellipse(28508.738400, 28694.731800, 497.335214, 497.335214, 0.000000, X, Y) && !ellipse(26306.832600, 30084.560000, 1285.080037, 1285.080037, 0.000000, X, Y) && !ellipse(33341.846000, 23421.606000, 3062.464088, 3062.464088, 0.000000, X, Y) && !ellipse(33859.030000, 22894.996000, 3120.416090, 3120.416090, 0.000000, X, Y) && !ellipse(32348.428000, 24569.464000, 1442.296042, 1442.296042, 0.000000, X, Y) && !ellipse(24698.966000, 30266.366000, 2700.880078, 2700.880078, 0.000000, X, Y) && !ellipse(26863.394000, 29510.522000, 2687.392077, 2687.392077, 0.000000, X, Y) && !ellipse(29275.540000, 26774.068000, 1291.296037, 1291.296037, 0.000000, X, Y) && !ellipse(24343.370000, 30502.371200, 1275.640037, 1275.640037, 0.000000, X, Y) && !ellipse(25639.098000, 30162.430000, 920.232026, 920.232026, 0.000000, X, Y) && !ellipse(24996.818817, 30755.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.487671, 28499.723755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32518.550000, 24217.966000, 3195.976092, 3195.976092, 0.000000, X, Y) && !ellipse(24608.079400, 31472.017400, 612.444818, 612.444818, 0.000000, X, Y) && !ellipse(25318.868561, 30312.824677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29237.975891, 27701.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30390.184265, 25294.163513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30145.426000, 27290.555600, 1347.656039, 1347.656039, 0.000000, X, Y) && !ellipse(27814.208466, 26329.675385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.916000, 31590.396000, 2922.416084, 2922.416084, 0.000000, X, Y) && !ellipse(30674.067963, 25895.798462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.564453, 26077.168823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.928000, 25338.068000, 2883.696083, 2883.696083, 0.000000, X, Y) && !ellipse(23982.290000, 31370.934000, 2837.952082, 2837.952082, 0.000000, X, Y) && !ellipse(26117.971313, 29453.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29112.926000, 25527.888000, 1214.672035, 1214.672035, 0.000000, X, Y)
[Sun May 27 12:21:23 2012] Writing fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src33.gif
[Sun May 27 12:44:13 2012] Mean detx,y = (-742.82, 1257.33) 
[Sun May 27 12:44:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 12:44:31 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 12:44:32 2012] Setting source spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May 27 12:44:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun May 27 23:01:38 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:38 2012] Error reading totcts from fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May 27 23:01:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:38 2012] Using photon index=1.80, rate=0.0108, arf fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src33.arf
[Sun May 27 23:01:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:38 2012] Updating source flux to 1.1e-13
[Sun May 27 23:08:53 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Sun May 27 23:08:53 2012] Flag p found in src. 33 procflags, skipping spectral fitting
[Sun May 27 23:08:53 2012] Flag c found in src. 33 procflags, skipping spectral fitting