[Thu May 24 13:27:11 2012] Detection parameters:
  Position = (311.7, 337.9) = 8 48 57.72 -45 37 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.5 +/- 28.6
  Background counts = 206.4
  Rate = 0.009 +/- 0.001

[Thu May 24 13:27:13 2012] Off-axis axis estimate = 3.02'
[Thu May 24 21:19:13 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu May 24 21:19:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Thu May 24 21:19:13 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.94"
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src15.ximg exists
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri May 25 01:18:22 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src15 appears to have run properly
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri May 25 01:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May 25 01:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri May 25 01:18:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:19:02 2012] Warning, spatial fit 15 centroid is now closest to src. 33
[Fri May 25 01:19:03 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:19:03 2012] Assessing source extent using major
[Fri May 25 01:19:03 2012] Source does appear to be extended
[Fri May 25 01:19:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:19:03 2012] Source is confused with source 28
[Fri May 25 07:15:35 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:15:35 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Fri May 25 07:15:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925
[Fri May 25 07:15:35 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.94"
[Fri May 25 11:03:16 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src11.ximg exists
[Fri May 25 11:03:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src11.csv
[Fri May 25 11:03:16 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May 25 11:03:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src11.csv
[Fri May 25 11:03:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May 25 11:03:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 25 11:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 25 11:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:04:09 2012] Spatial fit model total counts = 3767.080000, observed total counts = 3298.000000
[Fri May 25 11:04:09 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 25 11:04:09 2012] Spatial fit model total counts = 6244.570000, observed total counts = 6235.000000
[Fri May 25 11:04:09 2012] Offset between fit and detection position for source 30 = 5.367352 pixels
[Fri May 25 11:04:09 2012] Warning, changing simple spatial fit ID from 11 to 14
[Fri May 25 11:04:09 2012] 6100.920000 total counts/ 4478.770000 bgd. counts: snr = 24.238829
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 5.367352 pixels
  Position = (307.8, 341.5) = 8 48 59.34 -45 37 20.9
  Extent = 32.1 (32.1-64.3)" x 17.5 (15.1-19.3)", rotation angle = 43 (35-49) degrees
  Source counts = 1622.2 +/- 78.1
  Background counts = 4478.8
  Rate = 0.05 +/- 0.003
[Fri May 25 11:04:09 2012] Spatial fit model total counts = 3702.700000, observed total counts = 3697.000000
[Fri May 25 11:04:09 2012] Offset between fit and detection position for source 30 = 3.329329 pixels
[Fri May 25 11:04:09 2012] Warning, changing simple spatial fit ID from 14 to 21
[Fri May 25 11:04:09 2012] 3700.167000 total counts/ 3585.710000 bgd. counts: snr = 1.911414
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 3.329329 pixels
  Position = (304.7, 342.7) = 8 49 0.63 -45 37 15.7
  Extent = 7.9 (4.1-15.1)", rotation angle = 0
  Source counts = 114.5 +/- 60.8
  Background counts = 3585.7
  Rate = 0.004 +/- 0.002
[Fri May 25 11:04:09 2012] Spatial fit model total counts = 3534.620000, observed total counts = 3533.000000
[Fri May 25 11:04:09 2012] Offset between fit and detection position for source 30 = 0.282334 pixels
[Fri May 25 11:04:09 2012] Warning, changing simple spatial fit ID from 21 to 47
[Fri May 25 11:04:09 2012] 3273.846000 total counts/ 3136.380000 bgd. counts: snr = 2.454601
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.282334 pixels
  Position = (304.9, 342.5) = 8 49 0.55 -45 37 16.6
  Extent = 8.1 (2.8-13.4)", rotation angle = 0
  Source counts = 137.5 +/- 57.2
  Background counts = 3136.4
  Rate = 0.004 +/- 0.002
[Fri May 25 11:04:09 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:04:09 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:04:09 2012] Source does appear to be extended
[Fri May 25 11:04:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:21:23 2012] XMMSAS src. selection expression = ellipse(26475.696000, 29751.308000, 486.043214, 486.043214, 0.000000, X, Y)
[Sun May 27 12:21:23 2012] Writing source region out to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src30_src.reg
[Sun May 27 12:21:23 2012] Extracting stamp from image fullrun_mos2_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (277, 315) - (333, 370)
[Sun May 27 12:21:23 2012] XMMSAS bgd. selection expression = annulus(26475.696000, 29751.308000, 810.072023, 1620.144047, X, Y) && !ellipse(27602.114000, 27963.872000, 2447.856070, 2447.856070, 0.000000, X, Y) && !ellipse(26620.801960, 29764.045200, 2632.224076, 1101.480032, 46.830000, X, Y) && !ellipse(27312.997345, 28658.738770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28158.024000, 27553.704200, 1223.928035, 1223.928035, 0.000000, X, Y) && !ellipse(27782.120000, 28980.040000, 1373.240040, 1373.240040, -0.000000, X, Y) && !ellipse(28497.484000, 28384.308000, 2746.480079, 2746.480079, 0.000000, X, Y) && !ellipse(25442.724800, 30742.104000, 585.364817, 585.364817, 0.000000, X, Y) && !ellipse(28508.738400, 28694.731800, 497.335214, 497.335214, 0.000000, X, Y) && !ellipse(26306.832600, 30084.560000, 1285.080037, 1285.080037, 0.000000, X, Y) && !ellipse(24698.966000, 30266.366000, 2700.880078, 2700.880078, 0.000000, X, Y) && !ellipse(26863.394000, 29510.522000, 2687.392077, 2687.392077, 0.000000, X, Y) && !ellipse(24343.370000, 30502.371200, 1275.640037, 1275.640037, 0.000000, X, Y) && !ellipse(25639.098000, 30162.430000, 920.232026, 920.232026, 0.000000, X, Y) && !ellipse(24996.818817, 30755.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26661.487671, 28499.723755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24608.079400, 31472.017400, 612.444818, 612.444818, 0.000000, X, Y) && !ellipse(25318.868561, 30312.824677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.916000, 31590.396000, 2922.416084, 2922.416084, 0.000000, X, Y) && !ellipse(23982.290000, 31370.934000, 2837.952082, 2837.952082, 0.000000, X, Y) && !ellipse(26117.971313, 29453.986420, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 12:21:23 2012] Writing fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src30.gif
[Sun May 27 12:54:51 2012] Mean detx,y = (475.74, 2182.77) 
[Sun May 27 12:54:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 12:55:01 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 12:55:02 2012] Setting source spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun May 27 12:55:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun May 27 23:01:38 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:38 2012] Error reading totcts from fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun May 27 23:01:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:39 2012] Using photon index=1.80, rate=0.00441, arf fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src30.arf
[Sun May 27 23:01:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:39 2012] Updating source flux to 4.8e-14
[Sun May 27 23:08:53 2012] Flag p found in src. 30 procflags, skipping spectral fitting
[Sun May 27 23:08:53 2012] Flag c found in src. 30 procflags, skipping spectral fitting