[Thu May 24 13:27:11 2012] Detection parameters:
  Position = (334.9, 309.9) = 8 48 48.07 -45 39 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 376.8 +/- 34.4
  Background counts = 226.5
  Rate = 0.01 +/- 0.001

[Thu May 24 13:27:13 2012] Off-axis axis estimate = 2.77'
[Thu May 24 21:19:13 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Thu May 24 21:19:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758
[Thu May 24 21:19:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.82"
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src3.csv
[Fri May 25 01:18:22 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 25 01:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src3.csv
[Fri May 25 01:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 25 01:18:23 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 25 01:19:02 2012] Spatial fit model total counts = 4254.930000, observed total counts = 4251.000000
[Fri May 25 01:19:02 2012] Offset between fit and detection position for source 3 = 2.873178 pixels
[Fri May 25 01:19:02 2012] 4150.624000 total counts/ 3762.630000 bgd. counts: snr = 6.325273
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.873178 pixels
  Position = (337.0, 307.9) = 8 48 47.21 -45 39 47.0
  Extent = 15.6 (15.6-31.3)", rotation angle = 0
  Source counts = 388.0 +/- 64.4
  Background counts = 3762.6
  Rate = 0.01 +/- 0.002
[Fri May 25 01:19:03 2012] Spatial fit model total counts = 3619.780000, observed total counts = 3605.000000
[Fri May 25 01:19:03 2012] Offset between fit and detection position for source 3 = 1.018139 pixels
[Fri May 25 01:19:03 2012] Warning, changing simple spatial fit ID from 3 to 20
[Fri May 25 01:19:03 2012] 3597.909200 total counts/ 3540.000000 bgd. counts: snr = 0.973298
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.018139 pixels
  Position = (336.8, 307.0) = 8 48 47.32 -45 39 51.3
  Extent = 8.1 (2.2-17.2)", rotation angle = 91 (90-130) degrees
  Source counts = 57.9 +/- 60.0
  Background counts = 3540.0
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability