[Thu May 24 13:27:11 2012] Detection parameters: Position = (246.1, 371.4) = 8 49 24.90 -45 35 11.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 120.7 +/- 21.8 Background counts = 145.0 Rate = 0.006 +/- 0.001 [Thu May 24 13:27:13 2012] Off-axis axis estimate = 6.51' [Thu May 24 21:19:13 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting [Thu May 24 21:19:13 2012] Initial guess for spatial extent in simple fitting = 9.68" [Thu May 24 21:19:13 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009 [Thu May 24 21:19:13 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 9.68" [Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src42.ximg exists [Fri May 25 01:18:23 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src42_1.ximg exists [Fri May 25 01:18:23 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_src42 appears to have run properly [Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src42.ximg exists [Fri May 25 01:18:24 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists [Fri May 25 01:18:24 2012] Fit fullrun_mos2_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly [Fri May 25 01:19:03 2012] Source 10 is offset by 7.264909 and 6.559586 pixels which is larger than 2 X fitted extent = 1.107058 x 1.107058, not incorporating fit results [Fri May 25 01:19:03 2012] Spatial fit model total counts = 1775.660000, observed total counts = 1784.000000 [Fri May 25 01:19:03 2012] Offset between fit and detection position for source 10 = 4.413847 pixels [Fri May 25 01:19:03 2012] 1792.835000 total counts/ 1276.810000 bgd. counts: snr = 14.441344 Spatial fit parameters: Offset between fit and detection position for source 10 = 4.413847 pixels Position = (243.5, 375.0) = 8 49 25.98 -45 34 55.3 Extent = 19.4 (19.3-38.7)" x 15.6 (12.8-19.2)", rotation angle = 246 (213-90) degrees Source counts = 516.0 +/- 42.3 Background counts = 1276.8 Rate = 0.02 +/- 0.001 [Fri May 25 01:19:03 2012] Vigneting correction estimate = 1.000000 [Fri May 25 01:19:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 01:19:03 2012] Assessing source extent using major axis lower bound [Fri May 25 01:19:03 2012] Source does appear to be extended [Fri May 25 01:19:03 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01 [Fri May 25 01:19:03 2012] Source is confused with source 7 [Fri May 25 07:15:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 25 07:15:35 2012] Initial guess for spatial extent in simple fitting = 17.48" [Fri May 25 07:15:35 2012] source mask rpix=4.0, npix_max = 81, mask sum = 76, frac = 0.930 [Fri May 25 07:15:35 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 17.48" [Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src31.ximg exists [Fri May 25 11:03:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src31.csv [Fri May 25 11:03:17 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src31_1.ximg exists [Fri May 25 11:03:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src31.csv [Fri May 25 11:03:17 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src31_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists [Fri May 25 11:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src31.csv [Fri May 25 11:03:19 2012] fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists [Fri May 25 11:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src31.csv [Fri May 25 11:03:19 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 25 11:04:09 2012] Warning, spatial fit 31 centroid is now closest to src. 15 [Fri May 25 11:04:09 2012] Spatial fit model total counts = 3816.860000, observed total counts = 3193.000000 [Fri May 25 11:04:09 2012] Poor agreement between spatial fit and data for source 10 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 25 11:04:09 2012] Vigneting correction estimate = 1.000000 [Fri May 25 11:04:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 11:04:09 2012] Assessing source extent using major axis lower bound [Fri May 25 11:04:09 2012] Source does appear to be extended [Fri May 25 11:04:09 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01 [Sun May 27 12:21:24 2012] XMMSAS src. selection expression = ellipse(21137.050000, 32574.416000, 1162.032033, 936.000027, 246.119000, X, Y) [Sun May 27 12:21:24 2012] Writing source region out to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src10_src.reg [Sun May 27 12:21:24 2012] Extracting stamp from image fullrun_mos2_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (177, 308) - (310, 442) [Sun May 27 12:21:24 2012] XMMSAS bgd. selection expression = annulus(21137.050000, 32574.416000, 1936.720056, 3873.440111, X, Y) && !ellipse(26620.801960, 29764.045200, 2632.224076, 1101.480032, 46.830000, X, Y) && !ellipse(20642.220306, 29732.047638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25442.724800, 30742.104000, 585.364817, 585.364817, 0.000000, X, Y) && !ellipse(24698.966000, 30266.366000, 2700.880078, 2700.880078, 0.000000, X, Y) && !ellipse(19990.734528, 30812.851654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21556.658800, 30472.109800, 311.085609, 311.085609, 0.000000, X, Y) && !ellipse(26863.394000, 29510.522000, 2687.392077, 2687.392077, 0.000000, X, Y) && !ellipse(24343.370000, 30502.371200, 1275.640037, 1275.640037, 0.000000, X, Y) && !ellipse(25639.098000, 30162.430000, 920.232026, 920.232026, 0.000000, X, Y) && !ellipse(24996.818817, 30755.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24608.079400, 31472.017400, 612.444818, 612.444818, 0.000000, X, Y) && !ellipse(25318.868561, 30312.824677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.916000, 31590.396000, 2922.416084, 2922.416084, 0.000000, X, Y) && !ellipse(22429.368000, 32086.442000, 1461.208042, 1461.208042, 0.000000, X, Y) && !ellipse(22938.440979, 30934.821045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.290000, 31370.934000, 2837.952082, 2837.952082, 0.000000, X, Y) && !ellipse(20745.754000, 33425.646000, 1580.488045, 1580.488045, 0.000000, X, Y) [Sun May 27 12:21:24 2012] Writing fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src10.gif [Sun May 27 13:46:00 2012] Mean detx,y = (5636.24, 5192.77) [Sun May 27 13:46:02 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 27 13:46:19 2012] Binned source spectrum to 10 counts/bin [Sun May 27 13:46:19 2012] Setting source spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Sun May 27 13:46:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src10_bgd.pi.gz [Sun May 27 23:01:38 2012] Updating aperture counts using extracted products [Sun May 27 23:01:38 2012] Error reading totcts from fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Sun May 27 23:01:39 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 27 23:01:39 2012] Using photon index=1.80, rate=0.0166, arf fullrun_mos2_xmm0112870301_pi300-10000_pass1_cl_src10.arf [Sun May 27 23:01:39 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 27 23:01:39 2012] Updating source flux to 2.6e-13 [Sun May 27 23:08:53 2012] Flag b found in src. 10 procflags, skipping spectral fitting [Sun May 27 23:08:53 2012] Flag p found in src. 10 procflags, skipping spectral fitting [Sun May 27 23:08:53 2012] Flag c found in src. 10 procflags, skipping spectral fitting