[Thu May 24 13:26:34 2012] Detection parameters:
  Position = (360.9, 286.0) = 8 48 37.30 -45 41 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.9 +/- 23.3
  Background counts = 174.5
  Rate = 0.005 +/- 0.0009

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 4.61'
[Thu May 24 17:22:27 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Thu May 24 17:22:27 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.192
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 8.74"
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src48.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src48.csv
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src48_1.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src48.csv
[Thu May 24 21:19:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Thu May 24 21:19:13 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Fri May 25 01:18:50 2012] Source 52 is offset by -4.807152 and -0.480467 pixels which is larger than
2 X fitted extent = 0.992933 x 0.992933, not incorporating fit results
[Fri May 25 01:18:50 2012] Spatial fit model total counts = 2675.310000, observed total counts = 2674.000000
[Fri May 25 01:18:50 2012] Offset between fit and detection position for source 52 = 1.215918 pixels
[Fri May 25 01:18:50 2012] 2672.201700 total counts/ 2649.980000 bgd. counts: snr = 0.431674
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 1.215918 pixels
  Position = (361.0, 284.8) = 8 48 37.23 -45 41 27.6
  Extent = 3.4 (2.2-15.3)", rotation angle = 0
  Source counts = 22.2 +/- 51.7
  Background counts = 2650.0
  Rate = 0.0007 +/- 0.002
  Deleting source due to low Poisson probability