[Thu May 24 13:26:34 2012] Detection parameters:
  Position = (369.0, 287.9) = 8 48 33.92 -45 41 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.6 +/- 24.8
  Background counts = 158.5
  Rate = 0.007 +/- 0.0009

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 5.17'
[Thu May 24 17:22:27 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Thu May 24 17:22:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.360
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.02"
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src27.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src27.csv
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src27.csv
[Thu May 24 21:19:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May 24 21:19:12 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri May 25 01:18:49 2012] Spatial fit model total counts = 2546.130000, observed total counts = 2547.000000
[Fri May 25 01:18:49 2012] Offset between fit and detection position for source 51 = 5.168616 pixels
[Fri May 25 01:18:49 2012] 2500.980000 total counts/ 2082.130000 bgd. counts: snr = 9.179195
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 5.168616 pixels
  Position = (372.7, 284.3) = 8 48 32.40 -45 41 29.7
  Extent = 18.0 (18.0-36.1)", rotation angle = 0
  Source counts = 418.9 +/- 50.0
  Background counts = 2082.1
  Rate = 0.01 +/- 0.002
[Fri May 25 01:18:50 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:50 2012] Assessing source extent using major axis lower bound
[Fri May 25 01:18:50 2012] Source does appear to be extended
[Fri May 25 01:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:18:50 2012] Source is confused with source 53
[Fri May 25 04:00:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 04:00:40 2012] Initial guess for spatial extent in simple fitting = 18.03"
[Fri May 25 04:00:40 2012] source mask rpix=4.1, npix_max = 86, mask sum = 81, frac = 0.939
[Fri May 25 04:00:40 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 18.03"
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src26.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src26.csv
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src26.csv
[Fri May 25 07:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri May 25 07:15:35 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri May 25 11:03:53 2012] Spatial fit model total counts = 5310.860000, observed total counts = 5045.000000
[Fri May 25 11:03:53 2012] Offset between fit and detection position for source 51 = 4.123165 pixels
[Fri May 25 11:03:53 2012] Warning, changing simple spatial fit ID from 26 to 21
[Fri May 25 11:03:53 2012] 5104.690000 total counts/ 2715.780000 bgd. counts: snr = 45.840832
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 4.123165 pixels
  Position = (369.6, 287.0) = 8 48 33.67 -45 41 17.7
  Extent = 36.8 (36.8-73.6)", rotation angle = 0
  Source counts = 2388.9 +/- 71.4
  Background counts = 2715.8
  Rate = 0.08 +/- 0.002
[Fri May 25 11:03:53 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:53 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:03:53 2012] Source does appear to be extended
[Fri May 25 11:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 16:36:42 2012] Counts = 2388.910000, rescaling region sizes by 2.000000
[Sat May 26 16:36:42 2012] XMMSAS src. selection expression = ellipse(32107.998000, 24924.154000, 4417.104127, 4417.104127, 0.000000, X, Y)
[Sat May 26 16:36:42 2012] Writing source region out to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src51_src.reg
[Sat May 26 16:36:42 2012] Extracting stamp from image fullrun_mos1_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (116, 33) - (595, 541)
[Sat May 26 16:36:42 2012] XMMSAS bgd. selection expression = annulus(32107.998000, 24924.154000, 14723.680424, 29447.360847, X, Y) && !ellipse(29765.630000, 26531.842000, 1308.688038, 1308.688038, 0.000000, X, Y) && !ellipse(27274.262000, 29147.248000, 2589.856075, 2589.856075, 0.000000, X, Y) && !ellipse(28857.260000, 27062.872000, 2617.376075, 2617.376075, 0.000000, X, Y) && !ellipse(13511.851200, 24418.041400, 499.483214, 308.144009, 72.952000, X, Y) && !ellipse(28019.553000, 27189.130000, 1196.992034, 1196.992034, 0.000000, X, Y) && !ellipse(36938.142303, 34062.288910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27239.714000, 28582.188000, 1231.032035, 298.560009, 33.726000, X, Y) && !ellipse(28976.834600, 27982.728000, 1282.792037, 1282.792037, 0.000000, X, Y) && !ellipse(26969.418000, 28765.618000, 2450.848071, 2450.848071, 0.000000, X, Y) && !ellipse(28878.306000, 26657.246000, 2465.152071, 2465.152071, 0.000000, X, Y) && !ellipse(29350.782776, 26913.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26463.308600, 19358.356400, 556.306416, 556.306416, 0.000000, X, Y) && !ellipse(27117.422000, 29596.096000, 1294.568037, 1068.504031, 19.741000, X, Y) && !ellipse(26366.820000, 30062.116000, 2206.128063, 2206.128063, 0.000000, X, Y) && !ellipse(28157.440000, 28882.600400, 963.648028, 963.648028, 0.000000, X, Y) && !ellipse(23783.054000, 31478.446000, 2928.496084, 2928.496084, 0.000000, X, Y) && !ellipse(25419.008000, 30789.198000, 1322.472038, 1322.472038, 0.000000, X, Y) && !ellipse(30115.850708, 25809.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.305725, 31318.663940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33037.912000, 23863.172000, 2884.944083, 2884.944083, 0.000000, X, Y) && !ellipse(21590.637800, 30466.413800, 484.240814, 484.240814, 0.000000, X, Y) && !ellipse(29934.396000, 27623.032000, 753.390422, 753.390422, 0.000000, X, Y) && !ellipse(24607.477588, 30697.908770, 1343.968039, 1020.281016, 5.130139, X, Y) && !ellipse(26056.722000, 30229.300000, 2494.384072, 2494.384072, 0.000000, X, Y) && !ellipse(28816.317413, 28390.607361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.422000, 30707.410000, 1322.256038, 1322.256038, 0.000000, X, Y) && !ellipse(31651.588000, 25678.342000, 731.629621, 731.629621, 0.000000, X, Y) && !ellipse(34882.007965, 21802.433594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25925.738725, 30360.839132, 2928.496084, 1464.360754, 39.011704, X, Y) && !ellipse(33268.076000, 23247.450000, 1606.952046, 1606.952046, 0.000000, X, Y) && !ellipse(25025.952000, 30333.464000, 2364.248068, 2364.248068, 0.000000, X, Y) && !ellipse(23394.772800, 31931.145600, 1464.248042, 1464.248042, 0.000000, X, Y) && !ellipse(31601.315704, 33595.638306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21078.542511, 28729.954620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23823.056000, 31832.006000, 1405.824040, 1405.824040, 0.000000, X, Y) && !ellipse(21027.202209, 29501.479584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30399.235260, 27256.835510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.614000, 26627.372800, 1366.000039, 676.011219, 20.544900, X, Y) && !ellipse(34373.120000, 22344.840000, 1686.232049, 1686.232049, 0.000000, X, Y) && !ellipse(31687.816000, 25309.476000, 3011.872087, 3011.872087, 0.000000, X, Y) && !ellipse(26343.707214, 28754.978271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21896.930000, 32365.830000, 1485.880043, 1485.880043, 0.000000, X, Y) && !ellipse(32579.704000, 24362.656000, 1511.912044, 1511.912044, 0.000000, X, Y) && !ellipse(30643.158112, 25353.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22663.766000, 31879.540000, 2971.760086, 2971.760086, 0.000000, X, Y) && !ellipse(20527.002655, 30114.982513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.666382, 25711.834137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34025.073364, 22832.861084, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 16:36:42 2012] Writing fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src51.gif
[Sat May 26 18:11:13 2012] Mean detx,y = (-2429.58, 3974.45) 
[Sat May 26 18:11:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 18:22:08 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 18:22:08 2012] Setting source spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat May 26 18:22:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun May 27 23:01:36 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:36 2012] Error reading totcts from fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun May 27 23:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:37 2012] Using photon index=1.80, rate=0.0767, arf fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src51.arf
[Sun May 27 23:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:37 2012] Updating source flux to 7.3e-13
[Sun May 27 23:01:41 2012] Flag c found in src. 51 procflags, skipping spectral fitting