[Thu May 24 13:26:34 2012] Detection parameters:
  Position = (375.0, 284.8) = 8 48 31.42 -45 41 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.6 +/- 21.9
  Background counts = 148.9
  Rate = 0.005 +/- 0.0008

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 5.64'
[Thu May 24 17:22:27 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Thu May 24 17:22:27 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.087
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 9.25"
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src49.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src49.csv
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src49.csv
[Thu May 24 21:19:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu May 24 21:19:13 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Fri May 25 01:18:49 2012] Spatial fit model total counts = 2197.160000, observed total counts = 2200.000000
[Fri May 25 01:18:49 2012] Offset between fit and detection position for source 50 = 4.213668 pixels
[Fri May 25 01:18:49 2012] Warning, changing simple spatial fit ID from 49 to 21
[Fri May 25 01:18:49 2012] 2154.075000 total counts/ 1508.250000 bgd. counts: snr = 16.629461
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 4.213668 pixels
  Position = (375.0, 280.6) = 8 48 31.42 -45 41 45.8
  Extent = 18.9 (18.9-37.8)", rotation angle = 0
  Source counts = 645.8 +/- 46.4
  Background counts = 1508.2
  Rate = 0.02 +/- 0.001
[Fri May 25 01:18:50 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:50 2012] Assessing source extent using major axis lower bound
[Fri May 25 01:18:50 2012] Source does appear to be extended
[Fri May 25 01:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:18:50 2012] Source is confused with source 53
[Fri May 25 04:00:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 04:00:40 2012] Initial guess for spatial extent in simple fitting = 18.90"
[Fri May 25 04:00:40 2012] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.959
[Fri May 25 04:00:40 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 18.90"
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src47.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src47.csv
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src47_1.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src47.csv
[Fri May 25 07:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Fri May 25 07:15:35 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Fri May 25 11:03:53 2012] Source 50 is offset by 4.071471 and 2.301724 pixels which is larger than
2 X fitted extent = 1.505890 x 1.505890, not incorporating fit results
[Fri May 25 11:03:53 2012] Warning, spatial fit 47 centroid is now closest to src. 49
[Fri May 25 11:03:53 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:53 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:03:53 2012] Source does appear to be extended
[Fri May 25 11:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 16:36:43 2012] XMMSAS src. selection expression = ellipse(32579.704000, 24362.656000, 1133.934033, 1133.934033, 0.000000, X, Y)
[Sat May 26 16:36:43 2012] Writing source region out to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src50_src.reg
[Sat May 26 16:36:43 2012] Extracting stamp from image fullrun_mos1_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (310, 215) - (440, 346)
[Sat May 26 16:36:43 2012] XMMSAS bgd. selection expression = annulus(32579.704000, 24362.656000, 1889.890054, 3779.780109, X, Y) && !ellipse(29765.630000, 26531.842000, 1308.688038, 1308.688038, 0.000000, X, Y) && !ellipse(27274.262000, 29147.248000, 2589.856075, 2589.856075, 0.000000, X, Y) && !ellipse(28857.260000, 27062.872000, 2617.376075, 2617.376075, 0.000000, X, Y) && !ellipse(28019.553000, 27189.130000, 1196.992034, 1196.992034, 0.000000, X, Y) && !ellipse(28976.834600, 27982.728000, 1282.792037, 1282.792037, 0.000000, X, Y) && !ellipse(26969.418000, 28765.618000, 2450.848071, 2450.848071, 0.000000, X, Y) && !ellipse(28878.306000, 26657.246000, 2465.152071, 2465.152071, 0.000000, X, Y) && !ellipse(29350.782776, 26913.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28157.440000, 28882.600400, 963.648028, 963.648028, 0.000000, X, Y) && !ellipse(30115.850708, 25809.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33037.912000, 23863.172000, 2884.944083, 2884.944083, 0.000000, X, Y) && !ellipse(29934.396000, 27623.032000, 753.390422, 753.390422, 0.000000, X, Y) && !ellipse(32107.998000, 24924.154000, 2944.736085, 2944.736085, 0.000000, X, Y) && !ellipse(28816.317413, 28390.607361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31651.588000, 25678.342000, 731.629621, 731.629621, 0.000000, X, Y) && !ellipse(34882.007965, 21802.433594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25925.738725, 30360.839132, 2928.496084, 1464.360754, 39.011704, X, Y) && !ellipse(33268.076000, 23247.450000, 1606.952046, 1606.952046, 0.000000, X, Y) && !ellipse(30399.235260, 27256.835510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.614000, 26627.372800, 1366.000039, 676.011219, 20.544900, X, Y) && !ellipse(34373.120000, 22344.840000, 1686.232049, 1686.232049, 0.000000, X, Y) && !ellipse(31687.816000, 25309.476000, 3011.872087, 3011.872087, 0.000000, X, Y) && !ellipse(30643.158112, 25353.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.666382, 25711.834137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34025.073364, 22832.861084, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 16:36:43 2012] Writing fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src50.gif
[Sat May 26 18:50:18 2012] Mean detx,y = (-3261.00, 5145.89) 
[Sat May 26 18:50:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 18:50:42 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 18:50:42 2012] Setting source spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat May 26 18:50:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sun May 27 23:01:36 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:36 2012] Error reading totcts from fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun May 27 23:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:37 2012] Using photon index=1.80, rate=0.0207, arf fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src50.arf
[Sun May 27 23:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:37 2012] Updating source flux to 2.2e-13
[Sun May 27 23:01:41 2012] Flag b found in src. 50 procflags, skipping spectral fitting
[Sun May 27 23:01:41 2012] Flag c found in src. 50 procflags, skipping spectral fitting