[Thu May 24 13:26:33 2012] Detection parameters: Position = (352.6, 298.7) = 8 48 40.74 -45 40 26.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 199.2 +/- 25.5 Background counts = 184.9 Rate = 0.007 +/- 0.0009 [Thu May 24 13:26:34 2012] Off-axis axis estimate = 3.93' [Thu May 24 17:22:27 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting [Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 8.39" [Thu May 24 17:22:27 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.932 [Thu May 24 17:22:27 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.39" [Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src25.ximg exists [Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src25.csv [Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src25_1.ximg exists [Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src25.csv [Thu May 24 21:19:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Thu May 24 21:19:12 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Fri May 25 01:18:49 2012] Spatial fit model total counts = 3346.540000, observed total counts = 3394.000000 [Fri May 25 01:18:49 2012] Offset between fit and detection position for source 45 = 0.323975 pixels [Fri May 25 01:18:49 2012] Warning, changing simple spatial fit ID from 25 to 9 [Fri May 25 01:18:49 2012] 3244.439700 total counts/ 3193.310000 bgd. counts: snr = 0.904800 Spatial fit parameters: Offset between fit and detection position for source 45 = 0.323975 pixels Position = (352.4, 298.4) = 8 48 40.83 -45 40 28.2 Extent = 4.9 (2.1-7.8)", rotation angle = 0 Source counts = 51.1 +/- 57.0 Background counts = 3193.3 Rate = 0.002 +/- 0.002 Deleting source due to low Poisson probability