[Thu May 24 13:26:33 2012] Detection parameters:
  Position = (346.7, 297.2) = 8 48 43.18 -45 40 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.6 +/- 28.6
  Background counts = 201.7
  Rate = 0.008 +/- 0.001

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 3.50'
[Thu May 24 17:22:27 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Thu May 24 17:22:27 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.18"
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src19.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src19.csv
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src19.csv
[Thu May 24 21:19:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May 24 21:19:12 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri May 25 01:18:49 2012] Source 44 is offset by -1.329900 and -1.398408 pixels which is larger than
2 X fitted extent = 1.175062 x 1.175062, not incorporating fit results
[Fri May 25 01:18:49 2012] Warning, spatial fit 19 centroid is now closest to src. 2
[Fri May 25 01:18:50 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:50 2012] Assessing source extent using major
[Fri May 25 01:18:50 2012] Source does appear to be extended
[Fri May 25 01:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:18:50 2012] Source is confused with source 2
[Fri May 25 04:00:40 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Fri May 25 04:00:40 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Fri May 25 04:00:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Fri May 25 04:00:40 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.18"
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 25 07:15:34 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 25 07:15:35 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri May 25 11:03:53 2012] Warning, spatial fit 19 centroid is now closest to src. 2
[Fri May 25 11:03:53 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:53 2012] Assessing source extent using major
[Fri May 25 11:03:53 2012] Source does appear to be extended
[Fri May 25 11:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 16:36:42 2012] XMMSAS src. selection expression = ellipse(30115.850708, 25809.090515, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 26 16:36:42 2012] Writing source region out to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src44_src.reg
[Sat May 26 16:36:42 2012] Extracting stamp from image fullrun_mos1_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (309, 260) - (384, 335)
[Sat May 26 16:36:42 2012] XMMSAS bgd. selection expression = annulus(30115.850708, 25809.090515, 1087.500000, 2175.000000, X, Y) && !ellipse(29765.630000, 26531.842000, 1308.688038, 1308.688038, 0.000000, X, Y) && !ellipse(27274.262000, 29147.248000, 2589.856075, 2589.856075, 0.000000, X, Y) && !ellipse(28857.260000, 27062.872000, 2617.376075, 2617.376075, 0.000000, X, Y) && !ellipse(28019.553000, 27189.130000, 1196.992034, 1196.992034, 0.000000, X, Y) && !ellipse(27239.714000, 28582.188000, 1231.032035, 298.560009, 33.726000, X, Y) && !ellipse(28976.834600, 27982.728000, 1282.792037, 1282.792037, 0.000000, X, Y) && !ellipse(26969.418000, 28765.618000, 2450.848071, 2450.848071, 0.000000, X, Y) && !ellipse(28878.306000, 26657.246000, 2465.152071, 2465.152071, 0.000000, X, Y) && !ellipse(29350.782776, 26913.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26366.820000, 30062.116000, 2206.128063, 2206.128063, 0.000000, X, Y) && !ellipse(28157.440000, 28882.600400, 963.648028, 963.648028, 0.000000, X, Y) && !ellipse(33037.912000, 23863.172000, 2884.944083, 2884.944083, 0.000000, X, Y) && !ellipse(29934.396000, 27623.032000, 753.390422, 753.390422, 0.000000, X, Y) && !ellipse(26056.722000, 30229.300000, 2494.384072, 2494.384072, 0.000000, X, Y) && !ellipse(32107.998000, 24924.154000, 2944.736085, 2944.736085, 0.000000, X, Y) && !ellipse(28816.317413, 28390.607361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31651.588000, 25678.342000, 731.629621, 731.629621, 0.000000, X, Y) && !ellipse(25925.738725, 30360.839132, 2928.496084, 1464.360754, 39.011704, X, Y) && !ellipse(33268.076000, 23247.450000, 1606.952046, 1606.952046, 0.000000, X, Y) && !ellipse(30399.235260, 27256.835510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.614000, 26627.372800, 1366.000039, 676.011219, 20.544900, X, Y) && !ellipse(31687.816000, 25309.476000, 3011.872087, 3011.872087, 0.000000, X, Y) && !ellipse(32579.704000, 24362.656000, 1511.912044, 1511.912044, 0.000000, X, Y) && !ellipse(30643.158112, 25353.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.666382, 25711.834137, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 16:36:42 2012] Writing fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src44.gif
[Sat May 26 17:46:28 2012] Mean detx,y = (-1685.74, 2827.17) 
[Sat May 26 17:46:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 17:46:41 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 17:46:41 2012] Setting source spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat May 26 17:46:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun May 27 04:02:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 04:02:30 2012] rmf not generated due to insufficient counts
[Sun May 27 23:01:36 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:36 2012] Error reading totcts from fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun May 27 23:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:37 2012] Using photon index=1.80, rate=0.00767, arf fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src44.arf
[Sun May 27 23:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:37 2012] Updating source flux to 8.1e-14
[Sun May 27 23:01:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting