[Thu May 24 13:26:33 2012] Detection parameters:
  Position = (115.9, 339.2) = 8 50 18.89 -45 37 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.6 +/- 12.4
  Background counts = 27.0
  Rate = 0.002 +/- 0.0004

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 13.56'
[Thu May 24 17:22:27 2012] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 13.21"
[Thu May 24 17:22:27 2012] source mask rpix=3.0, npix_max = 50, mask sum = 42, frac = 0.840
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 13.21"
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src57.ximg exists
[Thu May 24 21:19:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src57.csv
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src57_1.ximg exists
[Thu May 24 21:19:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src57.csv
[Thu May 24 21:19:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Thu May 24 21:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Thu May 24 21:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57.csv
[Thu May 24 21:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:50 2012] Spatial fit model total counts = 682.875000, observed total counts = 672.000000
[Fri May 25 01:18:50 2012] Offset between fit and detection position for source 35 = 1.289972 pixels
[Fri May 25 01:18:50 2012] Warning, changing simple spatial fit ID from 57 to 56
[Fri May 25 01:18:50 2012] 685.014000 total counts/ 685.014000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.289972 pixels
  Position = (115.1, 338.1) = 8 50 19.23 -45 37 34.1
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 0.0 +/- 26.2
  Background counts = 685.0
  Rate = 1e-17 +/- 0.0008
  Deleting source due to low Poisson probability