[Thu May 24 13:26:33 2012] Detection parameters:
  Position = (248.6, 350.6) = 8 49 23.89 -45 36 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.8 +/- 23.3
  Background counts = 171.0
  Rate = 0.008 +/- 0.001

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 5.23'
[Thu May 24 17:22:27 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Thu May 24 17:22:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.04"
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 24 21:19:11 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src22 appears to have run properly
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 24 21:19:12 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri May 25 01:18:49 2012] Spatial fit model total counts = 1768.440000, observed total counts = 1776.000000
[Fri May 25 01:18:49 2012] Offset between fit and detection position for source 29 = 0.229076 pixels
[Fri May 25 01:18:49 2012] 1746.822000 total counts/ 1599.780000 bgd. counts: snr = 3.676303
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.229076 pixels
  Position = (248.7, 350.7) = 8 49 23.83 -45 36 40.7
  Extent = 6.0 (4.4-9.1)", rotation angle = 0
  Source counts = 147.0 +/- 41.8
  Background counts = 1599.8
  Rate = 0.005 +/- 0.001
[Fri May 25 01:18:50 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:50 2012] Assessing source extent using major axis lower bound
[Fri May 25 01:18:50 2012] Source does appear to be extended
[Fri May 25 01:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 04:00:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 04:00:40 2012] Initial guess for spatial extent in simple fitting = 6.03"
[Fri May 25 04:00:40 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.125
[Fri May 25 04:00:40 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 6.03"
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src22.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src22.csv
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src22.csv
[Fri May 25 07:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri May 25 07:15:35 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri May 25 11:03:53 2012] Spatial fit model total counts = 1767.820000, observed total counts = 1776.000000
[Fri May 25 11:03:53 2012] Offset between fit and detection position for source 29 = 0.004377 pixels
[Fri May 25 11:03:53 2012] 1746.107000 total counts/ 1598.600000 bgd. counts: snr = 3.689289
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.004377 pixels
  Position = (248.7, 350.7) = 8 49 23.83 -45 36 40.7
  Extent = 6.1 (4.4-9.0)", rotation angle = 0
  Source counts = 147.5 +/- 41.8
  Background counts = 1598.6
  Rate = 0.005 +/- 0.001
[Fri May 25 11:03:53 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:53 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:03:53 2012] Source does appear to be extended
[Fri May 25 11:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 11:03:53 2012] Source is confused with source 18
[Sat May 26 16:36:42 2012] XMMSAS src. selection expression = ellipse(21590.637800, 30466.413800, 363.180610, 363.180610, 0.000000, X, Y)
[Sat May 26 16:36:42 2012] Writing source region out to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src29_src.reg
[Sat May 26 16:36:42 2012] Extracting stamp from image fullrun_mos1_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (228, 330) - (270, 372)
[Sat May 26 16:36:42 2012] XMMSAS bgd. selection expression = annulus(21590.637800, 30466.413800, 605.301017, 1210.602035, X, Y) && !ellipse(23783.054000, 31478.446000, 2928.496084, 2928.496084, 0.000000, X, Y) && !ellipse(25025.952000, 30333.464000, 2364.248068, 2364.248068, 0.000000, X, Y) && !ellipse(23394.772800, 31931.145600, 1464.248042, 1464.248042, 0.000000, X, Y) && !ellipse(21078.542511, 28729.954620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23823.056000, 31832.006000, 1405.824040, 1405.824040, 0.000000, X, Y) && !ellipse(21027.202209, 29501.479584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21896.930000, 32365.830000, 1485.880043, 1485.880043, 0.000000, X, Y) && !ellipse(22663.766000, 31879.540000, 2971.760086, 2971.760086, 0.000000, X, Y) && !ellipse(20527.002655, 30114.982513, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 16:36:42 2012] Writing fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src29.gif
[Sat May 26 17:57:41 2012] Mean detx,y = (3321.68, -5491.17) 
[Sat May 26 17:57:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 17:57:52 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 17:57:52 2012] Setting source spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May 26 17:57:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun May 27 23:01:36 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:36 2012] Error reading totcts from fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun May 27 23:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:37 2012] Using photon index=1.80, rate=0.00473, arf fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src29.arf
[Sun May 27 23:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:37 2012] Updating source flux to 7.3e-14
[Sun May 27 23:01:41 2012] Flag c found in src. 29 procflags, skipping spectral fitting