[Thu May 24 13:26:33 2012] Detection parameters:
  Position = (263.0, 366.0) = 8 49 17.89 -45 35 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.1 +/- 23.0
  Background counts = 164.5
  Rate = 0.005 +/- 0.001

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 5.53'
[Thu May 24 17:22:27 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Thu May 24 17:22:27 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.318
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 9.19"
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src38.ximg exists
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu May 24 21:19:11 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src38 appears to have run properly
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu May 24 21:19:13 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri May 25 01:18:50 2012] Warning, spatial fit 38 centroid is now closest to src. 16
[Fri May 25 01:18:50 2012] Spatial fit model total counts = 2303.160000, observed total counts = 2339.000000
[Fri May 25 01:18:50 2012] Offset between fit and detection position for source 19 = 7.958121 pixels
[Fri May 25 01:18:50 2012] Warning, changing simple spatial fit ID from 38 to 41
[Fri May 25 01:18:50 2012] 2240.664000 total counts/ 1828.530000 bgd. counts: snr = 9.638011
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 7.958121 pixels
  Position = (271.0, 366.3) = 8 49 14.60 -45 35 33.2
  Extent = 17.9 (17.9-35.8)", rotation angle = 0
  Source counts = 412.1 +/- 47.3
  Background counts = 1828.5
  Rate = 0.01 +/- 0.002
[Fri May 25 01:18:50 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:50 2012] Assessing source extent using major axis lower bound
[Fri May 25 01:18:50 2012] Source does appear to be extended
[Fri May 25 01:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 01:18:50 2012] Source is confused with source 22
[Fri May 25 04:00:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 04:00:40 2012] Initial guess for spatial extent in simple fitting = 17.89"
[Fri May 25 04:00:40 2012] source mask rpix=4.1, npix_max = 85, mask sum = 90, frac = 1.057
[Fri May 25 04:00:40 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 17.89"
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src37.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src37.csv
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src37.csv
[Fri May 25 07:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri May 25 07:15:35 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri May 25 11:03:52 2012] Spatial fit model total counts = 2437.010000, observed total counts = 2437.000000
[Fri May 25 11:03:52 2012] Offset between fit and detection position for source 19 = 3.403811 pixels
[Fri May 25 11:03:52 2012] Warning, changing simple spatial fit ID from 37 to 17
[Fri May 25 11:03:52 2012] 2174.725000 total counts/ 1600.880000 bgd. counts: snr = 14.342181
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 3.403811 pixels
  Position = (274.4, 366.4) = 8 49 13.19 -45 35 32.5
  Extent = 17.6 (17.6-35.1)", rotation angle = 0
  Source counts = 573.8 +/- 46.6
  Background counts = 1600.9
  Rate = 0.02 +/- 0.001
[Fri May 25 11:03:53 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:53 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:03:53 2012] Source does appear to be extended
[Fri May 25 11:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 16:36:43 2012] XMMSAS src. selection expression = ellipse(23823.056000, 31832.006000, 1054.368030, 1054.368030, 0.000000, X, Y)
[Sat May 26 16:36:43 2012] Writing source region out to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src19_src.reg
[Sat May 26 16:36:43 2012] Extracting stamp from image fullrun_mos1_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (214, 306) - (335, 427)
[Sat May 26 16:36:43 2012] XMMSAS bgd. selection expression = annulus(23823.056000, 31832.006000, 1757.280051, 3514.560101, X, Y) && !ellipse(27274.262000, 29147.248000, 2589.856075, 2589.856075, 0.000000, X, Y) && !ellipse(28857.260000, 27062.872000, 2617.376075, 2617.376075, 0.000000, X, Y) && !ellipse(28019.553000, 27189.130000, 1196.992034, 1196.992034, 0.000000, X, Y) && !ellipse(27239.714000, 28582.188000, 1231.032035, 298.560009, 33.726000, X, Y) && !ellipse(26969.418000, 28765.618000, 2450.848071, 2450.848071, 0.000000, X, Y) && !ellipse(28878.306000, 26657.246000, 2465.152071, 2465.152071, 0.000000, X, Y) && !ellipse(27117.422000, 29596.096000, 1294.568037, 1068.504031, 19.741000, X, Y) && !ellipse(26366.820000, 30062.116000, 2206.128063, 2206.128063, 0.000000, X, Y) && !ellipse(28157.440000, 28882.600400, 963.648028, 963.648028, 0.000000, X, Y) && !ellipse(23783.054000, 31478.446000, 2928.496084, 2928.496084, 0.000000, X, Y) && !ellipse(25419.008000, 30789.198000, 1322.472038, 1322.472038, 0.000000, X, Y) && !ellipse(24869.305725, 31318.663940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21590.637800, 30466.413800, 484.240814, 484.240814, 0.000000, X, Y) && !ellipse(24607.477588, 30697.908770, 1343.968039, 1020.281016, 5.130139, X, Y) && !ellipse(26056.722000, 30229.300000, 2494.384072, 2494.384072, 0.000000, X, Y) && !ellipse(25799.422000, 30707.410000, 1322.256038, 1322.256038, 0.000000, X, Y) && !ellipse(25925.738725, 30360.839132, 2928.496084, 1464.360754, 39.011704, X, Y) && !ellipse(25025.952000, 30333.464000, 2364.248068, 2364.248068, 0.000000, X, Y) && !ellipse(23394.772800, 31931.145600, 1464.248042, 1464.248042, 0.000000, X, Y) && !ellipse(21078.542511, 28729.954620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21027.202209, 29501.479584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26343.707214, 28754.978271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21896.930000, 32365.830000, 1485.880043, 1485.880043, 0.000000, X, Y) && !ellipse(22663.766000, 31879.540000, 2971.760086, 2971.760086, 0.000000, X, Y) && !ellipse(20527.002655, 30114.982513, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 16:36:43 2012] Writing fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src19.gif
[Sat May 26 18:37:55 2012] Mean detx,y = (4523.36, -3250.94) 
[Sat May 26 18:37:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 18:38:12 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 18:38:12 2012] Setting source spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat May 26 18:38:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun May 27 23:01:36 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:36 2012] Error reading totcts from fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun May 27 23:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:37 2012] Using photon index=1.80, rate=0.0184, arf fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src19.arf
[Sun May 27 23:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:37 2012] Updating source flux to 2.1e-13
[Sun May 27 23:01:41 2012] Flag c found in src. 19 procflags, skipping spectral fitting