[Thu May 24 13:26:33 2012] Detection parameters:
  Position = (363.8, 386.7) = 8 48 36.15 -45 34 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.9 +/- 20.0
  Background counts = 120.8
  Rate = 0.006 +/- 0.0008

[Thu May 24 13:26:34 2012] Off-axis axis estimate = 7.96'
[Thu May 24 17:22:27 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Thu May 24 17:22:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Thu May 24 17:22:27 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.41"
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src36.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src36.csv
[Thu May 24 21:19:11 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu May 24 21:19:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src36.csv
[Thu May 24 21:19:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu May 24 21:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu May 24 21:19:13 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu May 24 21:19:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu May 24 21:19:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 01:18:50 2012] Source 15 is offset by -3.408210 and -1.702624 pixels which is larger than
2 X fitted extent = 0.950051 x 0.950051, not incorporating fit results
[Fri May 25 01:18:50 2012] Vigneting correction estimate = 1.000000
[Fri May 25 01:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 01:18:50 2012] Assessing source extent using major
[Fri May 25 01:18:50 2012] Source does appear to be extended
[Fri May 25 01:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 04:00:40 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Fri May 25 04:00:40 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Fri May 25 04:00:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Fri May 25 04:00:40 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 10.41"
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src35.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src35.csv
[Fri May 25 07:15:34 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri May 25 07:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src35.csv
[Fri May 25 07:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri May 25 07:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri May 25 07:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 25 07:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:03:53 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 16.829889 pixels away
[Fri May 25 11:03:53 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:03:53 2012] Assessing source extent using major
[Fri May 25 11:03:53 2012] Source does appear to be extended
[Fri May 25 11:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 16:36:43 2012] XMMSAS src. selection expression = ellipse(31601.315704, 33595.638306, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 26 16:36:43 2012] Writing source region out to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src15_src.reg
[Sat May 26 16:36:43 2012] Extracting stamp from image fullrun_mos1_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (326, 349) - (401, 424)
[Sat May 26 16:36:43 2012] XMMSAS bgd. selection expression = annulus(31601.315704, 33595.638306, 1087.500000, 2175.000000, X, Y) && !ellipse(27274.262000, 29147.248000, 2589.856075, 2589.856075, 0.000000, X, Y)
[Sat May 26 16:36:43 2012] Writing fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src15.gif
[Sat May 26 18:36:48 2012] Mean detx,y = (5976.96, 4635.87) 
[Sat May 26 18:36:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 18:37:18 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 18:37:18 2012] Setting source spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat May 26 18:37:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 27 11:50:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 11:50:23 2012] rmf not generated due to insufficient counts
[Sun May 27 23:01:36 2012] Updating aperture counts using extracted products
[Sun May 27 23:01:36 2012] Error reading totcts from fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun May 27 23:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 23:01:37 2012] Using photon index=1.80, rate=0.00588, arf fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src15.arf
[Sun May 27 23:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 23:01:37 2012] Updating source flux to 7.9e-14
[Sun May 27 23:01:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting