[Thu May 24 13:26:32 2012] Detection parameters: Position = (328.5, 321.9) = 8 48 50.75 -45 38 47.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 311.5 +/- 31.6 Background counts = 217.4 Rate = 0.01 +/- 0.001 [Thu May 24 13:26:34 2012] Off-axis axis estimate = 2.76' [Thu May 24 17:22:27 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting [Thu May 24 17:22:27 2012] Initial guess for spatial extent in simple fitting = 7.81" [Thu May 24 17:22:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949 [Thu May 24 17:22:27 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.81" [Thu May 24 21:19:10 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src8.ximg exists [Thu May 24 21:19:10 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src8_1.ximg exists [Thu May 24 21:19:10 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_src8 appears to have run properly [Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Thu May 24 21:19:12 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Thu May 24 21:19:12 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Fri May 25 01:18:49 2012] Spatial fit model total counts = 4054.830000, observed total counts = 4055.000000 [Fri May 25 01:18:49 2012] Offset between fit and detection position for source 10 = 3.315221 pixels [Fri May 25 01:18:49 2012] 3993.539000 total counts/ 3755.860000 bgd. counts: snr = 3.878253 Spatial fit parameters: Offset between fit and detection position for source 10 = 3.315221 pixels Position = (331.8, 321.9) = 8 48 49.38 -45 38 46.4 Extent = 15.6 (15.6-31.2)", rotation angle = 0 Source counts = 237.7 +/- 63.2 Background counts = 3755.9 Rate = 0.008 +/- 0.002 [Fri May 25 01:18:49 2012] Spatial fit model total counts = 3415.650000, observed total counts = 3414.000000 [Fri May 25 01:18:49 2012] Offset between fit and detection position for source 10 = 1.802789 pixels [Fri May 25 01:18:49 2012] Warning, changing simple spatial fit ID from 8 to 28 [Fri May 25 01:18:49 2012] 3314.607000 total counts/ 2950.440000 bgd. counts: snr = 6.704358 Spatial fit parameters: Offset between fit and detection position for source 10 = 1.802789 pixels Position = (333.6, 322.2) = 8 48 48.64 -45 38 45.2 Extent = 16.0 (16.0-32.1)", rotation angle = 0 Source counts = 364.2 +/- 57.6 Background counts = 2950.4 Rate = 0.01 +/- 0.002 [Fri May 25 01:18:50 2012] Vigneting correction estimate = 1.000000 [Fri May 25 01:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 01:18:50 2012] Assessing source extent using major axis lower bound [Fri May 25 01:18:50 2012] Source does appear to be extended [Fri May 25 01:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 25 01:18:50 2012] Source is confused with source 4 [Fri May 25 04:00:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 25 04:00:40 2012] Initial guess for spatial extent in simple fitting = 16.03" [Fri May 25 04:00:40 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.027 [Fri May 25 04:00:40 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 16.03" [Fri May 25 07:15:33 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src8.ximg exists [Fri May 25 07:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src8.csv [Fri May 25 07:15:33 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src8_1.ximg exists [Fri May 25 07:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src8.csv [Fri May 25 07:15:33 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Fri May 25 07:15:35 2012] fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Fri May 25 07:15:35 2012] Fit fullrun_mos1_xmm0112870301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly [Fri May 25 11:03:52 2012] Warning, spatial fit 8 centroid is now closest to src. 5 [Fri May 25 11:03:53 2012] Spatial fit model total counts = 3419.490000, observed total counts = 3414.000000 [Fri May 25 11:03:53 2012] Offset between fit and detection position for source 10 = 0.055814 pixels [Fri May 25 11:03:53 2012] Warning, changing simple spatial fit ID from 8 to 27 [Fri May 25 11:03:53 2012] 3279.068000 total counts/ 2930.060000 bgd. counts: snr = 6.447586 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.055814 pixels Position = (333.6, 322.2) = 8 48 48.62 -45 38 45.0 Extent = 16.0 (16.0-32.1)", rotation angle = 0 Source counts = 349.0 +/- 57.3 Background counts = 2930.1 Rate = 0.01 +/- 0.002 [Fri May 25 11:03:53 2012] Vigneting correction estimate = 1.000000 [Fri May 25 11:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 25 11:03:53 2012] Assessing source extent using major axis lower bound [Fri May 25 11:03:53 2012] Source does appear to be extended [Fri May 25 11:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 26 16:36:41 2012] XMMSAS src. selection expression = ellipse(28976.834600, 27982.728000, 962.094028, 962.094028, 0.000000, X, Y) [Sat May 26 16:36:41 2012] Writing source region out to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src10_src.reg [Sat May 26 16:36:41 2012] Extracting stamp from image fullrun_mos1_xmm0112870301_pi300-10000_cl_sm2.00.img.gz, (278, 267) - (389, 377) [Sat May 26 16:36:41 2012] XMMSAS bgd. selection expression = annulus(28976.834600, 27982.728000, 1603.490046, 3206.980092, X, Y) && !ellipse(29765.630000, 26531.842000, 1308.688038, 1308.688038, 0.000000, X, Y) && !ellipse(27274.262000, 29147.248000, 2589.856075, 2589.856075, 0.000000, X, Y) && !ellipse(28857.260000, 27062.872000, 2617.376075, 2617.376075, 0.000000, X, Y) && !ellipse(28019.553000, 27189.130000, 1196.992034, 1196.992034, 0.000000, X, Y) && !ellipse(27239.714000, 28582.188000, 1231.032035, 298.560009, 33.726000, X, Y) && !ellipse(26969.418000, 28765.618000, 2450.848071, 2450.848071, 0.000000, X, Y) && !ellipse(28878.306000, 26657.246000, 2465.152071, 2465.152071, 0.000000, X, Y) && !ellipse(29350.782776, 26913.128693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27117.422000, 29596.096000, 1294.568037, 1068.504031, 19.741000, X, Y) && !ellipse(26366.820000, 30062.116000, 2206.128063, 2206.128063, 0.000000, X, Y) && !ellipse(28157.440000, 28882.600400, 963.648028, 963.648028, 0.000000, X, Y) && !ellipse(23783.054000, 31478.446000, 2928.496084, 2928.496084, 0.000000, X, Y) && !ellipse(25419.008000, 30789.198000, 1322.472038, 1322.472038, 0.000000, X, Y) && !ellipse(30115.850708, 25809.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33037.912000, 23863.172000, 2884.944083, 2884.944083, 0.000000, X, Y) && !ellipse(29934.396000, 27623.032000, 753.390422, 753.390422, 0.000000, X, Y) && !ellipse(24607.477588, 30697.908770, 1343.968039, 1020.281016, 5.130139, X, Y) && !ellipse(26056.722000, 30229.300000, 2494.384072, 2494.384072, 0.000000, X, Y) && !ellipse(32107.998000, 24924.154000, 2944.736085, 2944.736085, 0.000000, X, Y) && !ellipse(28816.317413, 28390.607361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.422000, 30707.410000, 1322.256038, 1322.256038, 0.000000, X, Y) && !ellipse(31651.588000, 25678.342000, 731.629621, 731.629621, 0.000000, X, Y) && !ellipse(25925.738725, 30360.839132, 2928.496084, 1464.360754, 39.011704, X, Y) && !ellipse(33268.076000, 23247.450000, 1606.952046, 1606.952046, 0.000000, X, Y) && !ellipse(25025.952000, 30333.464000, 2364.248068, 2364.248068, 0.000000, X, Y) && !ellipse(30399.235260, 27256.835510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.614000, 26627.372800, 1366.000039, 676.011219, 20.544900, X, Y) && !ellipse(31687.816000, 25309.476000, 3011.872087, 3011.872087, 0.000000, X, Y) && !ellipse(26343.707214, 28754.978271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32579.704000, 24362.656000, 1511.912044, 1511.912044, 0.000000, X, Y) && !ellipse(30643.158112, 25353.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.666382, 25711.834137, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 26 16:36:41 2012] Writing fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src10.gif [Sat May 26 16:59:40 2012] Mean detx,y = (464.98, 1697.95) [Sat May 26 16:59:41 2012] Setting backscal keywords in source and bgd. spectrum [Sat May 26 17:00:00 2012] Binned source spectrum to 10 counts/bin [Sat May 26 17:00:00 2012] Setting source spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Sat May 26 17:00:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src10_bgd.pi.gz [Sun May 27 23:01:36 2012] Updating aperture counts using extracted products [Sun May 27 23:01:36 2012] Error reading totcts from fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Sun May 27 23:01:37 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 27 23:01:37 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos1_xmm0112870301_pi300-10000_pass1_cl_src10.arf [Sun May 27 23:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 27 23:01:37 2012] Updating source flux to 1.1e-13 [Sun May 27 23:01:41 2012] Flag c found in src. 10 procflags, skipping spectral fitting