[Sat Aug 11 20:08:03 2012] Detection parameters: Position = (141.8, 376.0) = 8 0 44.30 -44 18 21.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 100.3 +/- 19.5 Background counts = 88.8 Rate = 0.003 +/- 0.0007 [Sat Aug 11 20:08:04 2012] Off-axis axis estimate = 12.67' [Sat Aug 11 20:11:34 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting [Sat Aug 11 20:11:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Aug 11 20:11:34 2012] Initial guess for spatial extent in simple fitting = 12.76" [Sat Aug 11 20:11:34 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.890 [Sat Aug 11 20:11:34 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.76" [Sat Aug 11 20:39:27 2012] fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_src8.ximg exists [Sat Aug 11 20:39:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_src8.csv [Sat Aug 11 20:39:27 2012] fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_src8_1.ximg exists [Sat Aug 11 20:39:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_src8.csv [Sat Aug 11 20:39:27 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 11 20:39:27 2012] fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Sat Aug 11 20:39:27 2012] fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Sat Aug 11 20:39:27 2012] Fit fullrun_pn_xmm0112870201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Sat Aug 11 21:37:16 2012] Spatial fit model total counts = 330.961000, observed total counts = 331.000000 [Sat Aug 11 21:37:16 2012] Offset between fit and detection position for source 8 = 4.373542 pixels [Sat Aug 11 21:37:16 2012] 338.516800 total counts/ 315.141000 bgd. counts: snr = 1.316782 Spatial fit parameters: Offset between fit and detection position for source 8 = 4.373542 pixels Position = (138.9, 372.8) = 8 0 45.51 -44 18 37.9 Extent = 8.8 (3.2-25.5)", rotation angle = 0 Source counts = 23.4 +/- 18.4 Background counts = 315.1 Rate = 0.002 +/- 0.002 Deleting source due to low Poisson probability