[Sat Aug 11 20:08:53 2012] Detection parameters:
  Position = (344.1, 480.7) = 7 59 22.39 -44 10 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 351.4 +/- 26.5
  Background counts = 73.2
  Rate = 0.01 +/- 0.0007

[Sat Aug 11 20:08:53 2012] Off-axis axis estimate = 13.62'
[Sat Aug 11 21:05:50 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 21:05:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 21:05:50 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Sat Aug 11 21:05:50 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sat Aug 11 21:05:50 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.24"
[Sat Aug 11 21:37:08 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_src4.ximg exists
[Sat Aug 11 21:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_src4.csv
[Sat Aug 11 21:37:08 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Aug 11 21:37:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_src4.csv
[Sat Aug 11 21:37:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:37:08 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Aug 11 21:37:08 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Aug 11 21:37:08 2012] Fit fullrun_mos2_xmm0112870201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Aug 11 21:37:25 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.764707 pixels away
[Sat Aug 11 21:37:25 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:37:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:37:25 2012] Assessing source extent using major
[Sat Aug 11 21:37:25 2012] Source does appear to be extended
[Sat Aug 11 21:37:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 22:33:23 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 22:33:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 22:33:23 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Sat Aug 11 22:33:23 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sat Aug 11 22:33:23 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.24"
[Sat Aug 11 23:01:55 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass1_src4.ximg exists
[Sat Aug 11 23:01:55 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Aug 11 23:01:55 2012] Fit fullrun_mos2_xmm0112870201_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat Aug 11 23:01:55 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Aug 11 23:01:55 2012] fullrun_mos2_xmm0112870201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Aug 11 23:01:55 2012] Fit fullrun_mos2_xmm0112870201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Aug 11 23:02:13 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.922799 pixels away
[Sat Aug 11 23:02:13 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 23:02:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 23:02:13 2012] Assessing source extent using major
[Sat Aug 11 23:02:13 2012] Source does appear to be extended
[Sat Aug 11 23:02:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 23:57:15 2012] XMMSAS src. selection expression = ellipse(29885.428680, 41774.381714, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 11 23:57:15 2012] Writing source region out to fullrun_mos2_xmm0112870201_pi300-10000_pass1_cl_src19_src.reg
[Sat Aug 11 23:57:15 2012] Extracting stamp from image fullrun_mos2_xmm0112870201_pi300-10000_cl_sm2.00.img.gz, (307, 443) - (382, 518)
[Sat Aug 11 23:57:15 2012] XMMSAS bgd. selection expression = annulus(29885.428680, 41774.381714, 1087.500000, 2175.000000, X, Y)
[Sat Aug 11 23:57:15 2012] Writing fullrun_mos2_xmm0112870201_pi300-10000_pass1_cl_src19.gif
[Sun Aug 12 00:00:11 2012] Mean detx,y = (-3832.58, 13900.66) 
[Sun Aug 12 00:00:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 00:00:21 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 00:00:21 2012] Setting source spectrum file to fullrun_mos2_xmm0112870201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 12 00:00:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Aug 12 00:11:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 00:11:16 2012] rmf not generated due to insufficient counts
[Sun Aug 12 00:27:05 2012] Updating aperture counts using extracted products
[Sun Aug 12 00:27:05 2012] Error reading totcts from fullrun_mos2_xmm0112870201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 12 00:27:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 00:27:05 2012] Using photon index=1.80, rate=0.0098, arf fullrun_mos2_xmm0112870201_pi300-10000_pass1_cl_src19.arf
[Sun Aug 12 00:27:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 00:27:05 2012] Updating source flux to 2.7e-13
[Sun Aug 12 00:28:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting