[Wed Jul 18 06:40:02 2012] Detection parameters:
  Position = (264.9, 268.5) = 8 57 53.82 -41 51 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 586.1 +/- 34.4
  Background counts = 160.7
  Rate = 0.02 +/- 0.001

[Wed Jul 18 06:40:03 2012] Off-axis axis estimate = 3.26'
[Wed Jul 18 06:43:20 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:43:20 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Wed Jul 18 06:43:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.723
[Wed Jul 18 06:43:20 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.06"
[Wed Jul 18 10:19:56 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jul 18 10:19:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src9.csv
[Wed Jul 18 10:19:56 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jul 18 10:19:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src9.csv
[Wed Jul 18 10:19:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 10:19:58 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jul 18 10:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Jul 18 10:19:58 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jul 18 10:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Jul 18 10:19:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:02:03 2012] Warning, spatial fit 9 centroid is now closest to src. 56
[Wed Jul 18 19:02:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:03 2012] Assessing source extent using major
[Wed Jul 18 19:02:03 2012] Source does appear to be extended
[Wed Jul 18 19:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:03 2012] Source is confused with source 7
[Wed Jul 18 19:02:51 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:02:51 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Wed Jul 18 19:02:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.723
[Wed Jul 18 19:02:51 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.06"
[Wed Jul 18 22:23:02 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jul 18 22:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src9.csv
[Wed Jul 18 22:23:02 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jul 18 22:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src9.csv
[Wed Jul 18 22:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jul 18 22:23:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:30 2012] Spatial fit model total counts = 5558.370000, observed total counts = 5297.000000
[Thu Jul 19 04:52:30 2012] Offset between fit and detection position for source 9 = 3.617734 pixels
[Thu Jul 19 04:52:30 2012] Warning, changing simple spatial fit ID from 9 to 7
[Thu Jul 19 04:52:30 2012] 5529.176000 total counts/ 5185.990000 bgd. counts: snr = 4.765558
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.617734 pixels
  Position = (263.7, 271.9) = 8 57 54.31 -41 51 17.1
  Extent = 15.7 (7.3-31.5)", rotation angle = 0
  Source counts = 343.2 +/- 74.4
  Background counts = 5186.0
  Rate = 0.008 +/- 0.002
[Thu Jul 19 04:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:30 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:30 2012] Source does appear to be extended
[Thu Jul 19 04:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:53:14 2012] XMMSAS src. selection expression = ellipse(22889.314000, 23605.054000, 944.664027, 944.664027, 0.000000, X, Y)
[Thu Jul 19 04:53:14 2012] Writing source region out to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src9_src.reg
[Thu Jul 19 04:53:14 2012] Extracting stamp from image fullrun_pn_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (209, 218) - (318, 326)
[Thu Jul 19 04:53:14 2012] XMMSAS bgd. selection expression = annulus(22889.314000, 23605.054000, 1574.440045, 3148.880091, X, Y) && !ellipse(25346.547260, 24725.189000, 409.975212, 409.975212, 0.000000, X, Y) && !ellipse(25929.944800, 25938.535000, 874.224025, 874.224025, 0.000000, X, Y) && !ellipse(23175.431549, 23795.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.482200, 23419.684200, 1159.280033, 1159.280033, 0.000000, X, Y) && !ellipse(24888.778200, 27693.796600, 1155.152033, 1155.152033, 0.000000, X, Y) && !ellipse(24280.205000, 27059.300000, 1145.600033, 1145.600033, 0.000000, X, Y) && !ellipse(26240.846069, 26650.702942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.009800, 26979.148000, 2310.304066, 2310.304066, 0.000000, X, Y) && !ellipse(24387.356000, 25703.749000, 1100.168032, 1100.168032, 0.000000, X, Y) && !ellipse(23237.614990, 25262.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.442000, 24674.363400, 1260.296036, 1260.296036, 185.572000, X, Y) && !ellipse(23107.882294, 24826.971283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.119812, 24677.737396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.494000, 24557.331400, 1151.352033, 1151.352033, 0.000000, X, Y) && !ellipse(23287.954346, 24309.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.864000, 24534.426000, 1130.424033, 1130.424033, 311.879000, X, Y) && !ellipse(23679.233978, 24222.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22373.482605, 24231.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26666.662323, 24240.377075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.427704, 23971.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21244.591200, 22936.257800, 619.572018, 619.572018, 0.000000, X, Y) && !ellipse(24987.993500, 22312.724915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.680939, 22338.704376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24549.380005, 22238.981476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21803.696060, 23076.831726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26214.127560, 21137.651800, 390.796811, 390.796811, 0.000000, X, Y) && !ellipse(20999.651320, 21997.636600, 479.095214, 316.388809, 111.136376, X, Y) && !ellipse(21307.649400, 20674.072000, 1498.248043, 1498.248043, 0.000000, X, Y)
[Thu Jul 19 04:53:14 2012] Writing fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src9.gif
[Thu Jul 19 05:04:07 2012] Mean detx,y = (2550.15, 1487.65) 
[Thu Jul 19 05:04:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:04:38 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:04:39 2012] Setting source spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 19 05:04:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jul 19 14:41:23 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:23 2012] Error reading totcts from fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 19 14:41:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:24 2012] Using photon index=1.80, rate=0.00779, arf fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src9.arf
[Thu Jul 19 14:41:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:24 2012] Updating source flux to 1.9e-14
[Thu Jul 19 14:51:27 2012] Flag c found in src. 9 procflags, skipping spectral fitting