[Wed Jul 18 06:40:03 2012] Detection parameters:
  Position = (246.8, 234.1) = 8 58 0.87 -41 54 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.0 +/- 16.7
  Background counts = 73.3
  Rate = 0.003 +/- 0.0005

[Wed Jul 18 06:40:03 2012] Off-axis axis estimate = 5.98'
[Wed Jul 18 06:43:20 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:43:20 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Wed Jul 18 06:43:20 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.267
[Wed Jul 18 06:43:20 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 9.42"
[Wed Jul 18 10:19:57 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src75.ximg exists
[Wed Jul 18 10:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src75.csv
[Wed Jul 18 10:19:57 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src75_1.ximg exists
[Wed Jul 18 10:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src75.csv
[Wed Jul 18 10:19:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 10:19:59 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Wed Jul 18 10:19:59 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Wed Jul 18 10:19:59 2012] Fit fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Wed Jul 18 19:02:03 2012] Spatial fit model total counts = 1094.140000, observed total counts = 1059.000000
[Wed Jul 18 19:02:03 2012] Offset between fit and detection position for source 75 = 4.293104 pixels
[Wed Jul 18 19:02:03 2012] 1115.354000 total counts/ 810.798000 bgd. counts: snr = 10.695740
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 4.293104 pixels
  Position = (245.5, 238.2) = 8 58 1.40 -41 53 43.6
  Extent = 18.7 (18.5-18.8)", rotation angle = 0
  Source counts = 304.6 +/- 33.4
  Background counts = 810.8
  Rate = 0.007 +/- 0.0008
[Wed Jul 18 19:02:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:03 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:02:03 2012] Source does appear to be extended
[Wed Jul 18 19:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:02:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 19:02:51 2012] Initial guess for spatial extent in simple fitting = 18.73"
[Wed Jul 18 19:02:51 2012] source mask rpix=4.3, npix_max = 92, mask sum = 89, frac = 0.964
[Wed Jul 18 19:02:51 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 18.73"
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src57.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src57.csv
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src57_1.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src57.csv
[Wed Jul 18 22:23:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 22:23:04 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Wed Jul 18 22:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed Jul 18 22:23:04 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Wed Jul 18 22:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src57.csv
[Wed Jul 18 22:23:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:30 2012] Warning, spatial fit 57 centroid is now closest to src. 65
[Thu Jul 19 04:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:30 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:30 2012] Source does appear to be extended
[Thu Jul 19 04:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:53:16 2012] XMMSAS src. selection expression = ellipse(21307.649400, 20674.072000, 1123.686032, 1123.686032, 0.000000, X, Y)
[Thu Jul 19 04:53:16 2012] Writing source region out to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src75_src.reg
[Thu Jul 19 04:53:16 2012] Extracting stamp from image fullrun_pn_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (181, 174) - (310, 303)
[Thu Jul 19 04:53:16 2012] XMMSAS bgd. selection expression = annulus(21307.649400, 20674.072000, 1872.810054, 3745.620108, X, Y) && !ellipse(25346.547260, 24725.189000, 409.975212, 409.975212, 0.000000, X, Y) && !ellipse(23175.431549, 23795.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.482200, 23419.684200, 1159.280033, 1159.280033, 0.000000, X, Y) && !ellipse(22889.314000, 23605.054000, 1259.552036, 1259.552036, 0.000000, X, Y) && !ellipse(23237.614990, 25262.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.442000, 24674.363400, 1260.296036, 1260.296036, 185.572000, X, Y) && !ellipse(23107.882294, 24826.971283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.494000, 24557.331400, 1151.352033, 1151.352033, 0.000000, X, Y) && !ellipse(23287.954346, 24309.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.864000, 24534.426000, 1130.424033, 1130.424033, 311.879000, X, Y) && !ellipse(23679.233978, 24222.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22373.482605, 24231.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.427704, 23971.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21244.591200, 22936.257800, 619.572018, 619.572018, 0.000000, X, Y) && !ellipse(24987.993500, 22312.724915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.680939, 22338.704376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24549.380005, 22238.981476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21803.696060, 23076.831726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16798.429520, 20919.219513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20999.651320, 21997.636600, 479.095214, 316.388809, 111.136376, X, Y) && !ellipse(18343.222200, 20828.572780, 540.390416, 540.390416, 0.000000, X, Y)
[Thu Jul 19 04:53:16 2012] Writing fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src75.gif
[Thu Jul 19 05:30:01 2012] Mean detx,y = (5743.98, 216.35) 
[Thu Jul 19 05:30:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:31:00 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:31:00 2012] Setting source spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Thu Jul 19 05:31:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Thu Jul 19 14:41:24 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:24 2012] Error reading totcts from fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Thu Jul 19 14:41:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:25 2012] Using photon index=1.80, rate=0.00691, arf fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src75.arf
[Thu Jul 19 14:41:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:25 2012] Updating source flux to 1.9e-14