[Wed Jul 18 06:40:03 2012] Detection parameters:
  Position = (251.2, 265.8) = 8 57 59.17 -41 51 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 429.6 +/- 29.8
  Background counts = 110.8
  Rate = 0.01 +/- 0.0009

[Wed Jul 18 06:40:03 2012] Off-axis axis estimate = 4.16'
[Wed Jul 18 06:43:20 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:43:20 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Wed Jul 18 06:43:20 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Wed Jul 18 06:43:20 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 8.51"
[Wed Jul 18 10:19:57 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src68.ximg exists
[Wed Jul 18 10:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src68.csv
[Wed Jul 18 10:19:57 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src68_1.ximg exists
[Wed Jul 18 10:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src68.csv
[Wed Jul 18 10:19:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 10:19:59 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Wed Jul 18 10:19:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Wed Jul 18 10:19:59 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Wed Jul 18 10:19:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Wed Jul 18 10:19:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:02:03 2012] Spatial fit model total counts = 3590.070000, observed total counts = 2844.000000
[Wed Jul 18 19:02:03 2012] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 19:02:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:03 2012] Assessing source extent using major
[Wed Jul 18 19:02:03 2012] Source does appear to be extended
[Wed Jul 18 19:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:03 2012] Source is confused with source 63
[Wed Jul 18 19:02:51 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:02:51 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Wed Jul 18 19:02:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Wed Jul 18 19:02:51 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 8.51"
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src51.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src51.csv
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src51_1.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src51.csv
[Wed Jul 18 22:23:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 22:23:04 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Wed Jul 18 22:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Wed Jul 18 22:23:04 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Wed Jul 18 22:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Wed Jul 18 22:23:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:30 2012] Source 68 is offset by -0.210620 and -7.576877 pixels which is larger than
2 X fitted extent = 0.826841 x 0.826841, not incorporating fit results
[Thu Jul 19 04:52:30 2012] Warning, spatial fit 51 centroid is now closest to src. 56
[Thu Jul 19 04:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:30 2012] Assessing source extent using major
[Thu Jul 19 04:52:30 2012] Source does appear to be extended
[Thu Jul 19 04:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:53:16 2012] XMMSAS src. selection expression = ellipse(21803.696060, 23076.831726, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 04:53:16 2012] Writing source region out to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src68_src.reg
[Thu Jul 19 04:53:16 2012] Extracting stamp from image fullrun_pn_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (214, 228) - (289, 303)
[Thu Jul 19 04:53:16 2012] XMMSAS bgd. selection expression = annulus(21803.696060, 23076.831726, 1087.500000, 2175.000000, X, Y) && !ellipse(23175.431549, 23795.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.482200, 23419.684200, 1159.280033, 1159.280033, 0.000000, X, Y) && !ellipse(22889.314000, 23605.054000, 1259.552036, 1259.552036, 0.000000, X, Y) && !ellipse(24760.009800, 26979.148000, 2310.304066, 2310.304066, 0.000000, X, Y) && !ellipse(24387.356000, 25703.749000, 1100.168032, 1100.168032, 0.000000, X, Y) && !ellipse(23237.614990, 25262.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.442000, 24674.363400, 1260.296036, 1260.296036, 185.572000, X, Y) && !ellipse(23107.882294, 24826.971283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.494000, 24557.331400, 1151.352033, 1151.352033, 0.000000, X, Y) && !ellipse(23287.954346, 24309.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.864000, 24534.426000, 1130.424033, 1130.424033, 311.879000, X, Y) && !ellipse(23679.233978, 24222.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22373.482605, 24231.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.427704, 23971.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21244.591200, 22936.257800, 619.572018, 619.572018, 0.000000, X, Y) && !ellipse(21606.680939, 22338.704376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24549.380005, 22238.981476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20999.651320, 21997.636600, 479.095214, 316.388809, 111.136376, X, Y) && !ellipse(21307.649400, 20674.072000, 1498.248043, 1498.248043, 0.000000, X, Y)
[Thu Jul 19 04:53:16 2012] Writing fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src68.gif
[Thu Jul 19 05:26:57 2012] Mean detx,y = (4007.08, 1729.94) 
[Thu Jul 19 05:27:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:27:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:27:19 2012] Setting source spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Jul 19 05:27:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Thu Jul 19 07:21:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 07:21:27 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:24 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:24 2012] Error reading totcts from fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Jul 19 14:41:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:25 2012] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src68.arf
[Thu Jul 19 14:41:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:25 2012] Updating source flux to 3.9e-14
[Thu Jul 19 14:51:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting