[Wed Jul 18 06:40:03 2012] Detection parameters:
  Position = (282.7, 256.2) = 8 57 46.88 -41 52 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.2 +/- 22.9
  Background counts = 179.4
  Rate = 0.003 +/- 0.0006

[Wed Jul 18 06:40:03 2012] Off-axis axis estimate = 3.27'
[Wed Jul 18 06:43:20 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:43:20 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Wed Jul 18 06:43:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.128
[Wed Jul 18 06:43:20 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.06"
[Wed Jul 18 10:19:57 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src66.ximg exists
[Wed Jul 18 10:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src66.csv
[Wed Jul 18 10:19:57 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src66_1.ximg exists
[Wed Jul 18 10:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src66.csv
[Wed Jul 18 10:19:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 10:19:59 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Wed Jul 18 10:19:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Wed Jul 18 10:19:59 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Wed Jul 18 10:19:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Wed Jul 18 10:19:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:02:03 2012] Source 66 is offset by 1.617054 and -8.684214 pixels which is larger than
2 X fitted extent = 0.917090 x 0.963139, not incorporating fit results
[Wed Jul 18 19:02:03 2012] Source 66 is offset by 6.392138 and -5.421431 pixels which is larger than
2 X fitted extent = 1.522989 x 7.414069, not incorporating fit results
[Wed Jul 18 19:02:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:03 2012] Assessing source extent using major
[Wed Jul 18 19:02:03 2012] Source does appear to be extended
[Wed Jul 18 19:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:03 2012] Source is confused with source 64
[Wed Jul 18 19:02:51 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:02:51 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Wed Jul 18 19:02:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.128
[Wed Jul 18 19:02:51 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 8.06"
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src50.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src50.csv
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src50_1.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src50.csv
[Wed Jul 18 22:23:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 22:23:04 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Wed Jul 18 22:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed Jul 18 22:23:04 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Jul 18 22:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed Jul 18 22:23:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:30 2012] Source 66 is offset by 4.994322 and -0.082121 pixels which is larger than
2 X fitted extent = 1.592492 x 12.739908, not incorporating fit results
[Thu Jul 19 04:52:30 2012] Source 66 is offset by 1.612184 and -8.850420 pixels which is larger than
2 X fitted extent = 0.917090 x 1.113094, not incorporating fit results
[Thu Jul 19 04:52:30 2012] Source 66 is offset by 6.338897 and -5.345799 pixels which is larger than
2 X fitted extent = 1.507936 x 7.414069, not incorporating fit results
[Thu Jul 19 04:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:30 2012] Assessing source extent using major
[Thu Jul 19 04:52:30 2012] Source does appear to be extended
[Thu Jul 19 04:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:53:15 2012] XMMSAS src. selection expression = ellipse(24549.380005, 22238.981476, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 04:53:15 2012] Writing source region out to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src66_src.reg
[Thu Jul 19 04:53:15 2012] Extracting stamp from image fullrun_pn_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (245, 219) - (320, 294)
[Thu Jul 19 04:53:16 2012] XMMSAS bgd. selection expression = annulus(24549.380005, 22238.981476, 1087.500000, 2175.000000, X, Y) && !ellipse(25346.547260, 24725.189000, 409.975212, 409.975212, 0.000000, X, Y) && !ellipse(23175.431549, 23795.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.482200, 23419.684200, 1159.280033, 1159.280033, 0.000000, X, Y) && !ellipse(22889.314000, 23605.054000, 1259.552036, 1259.552036, 0.000000, X, Y) && !ellipse(23237.614990, 25262.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.442000, 24674.363400, 1260.296036, 1260.296036, 185.572000, X, Y) && !ellipse(23107.882294, 24826.971283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.119812, 24677.737396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.494000, 24557.331400, 1151.352033, 1151.352033, 0.000000, X, Y) && !ellipse(23287.954346, 24309.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.864000, 24534.426000, 1130.424033, 1130.424033, 311.879000, X, Y) && !ellipse(23679.233978, 24222.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22373.482605, 24231.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26666.662323, 24240.377075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.427704, 23971.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24987.993500, 22312.724915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.680939, 22338.704376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21803.696060, 23076.831726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26214.127560, 21137.651800, 390.796811, 390.796811, 0.000000, X, Y) && !ellipse(21307.649400, 20674.072000, 1498.248043, 1498.248043, 0.000000, X, Y)
[Thu Jul 19 04:53:16 2012] Writing fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src66.gif
[Thu Jul 19 05:26:14 2012] Mean detx,y = (2261.04, -471.10) 
[Thu Jul 19 05:26:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:26:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:26:46 2012] Setting source spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Thu Jul 19 05:26:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Thu Jul 19 07:17:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 07:17:23 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:24 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:24 2012] Error reading totcts from fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Thu Jul 19 14:41:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:25 2012] Using photon index=1.80, rate=0.00346, arf fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src66.arf
[Thu Jul 19 14:41:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:25 2012] Updating source flux to 8.5e-15
[Thu Jul 19 14:51:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting