[Wed Jul 18 06:40:02 2012] Detection parameters:
  Position = (163.5, 318.8) = 8 58 33.28 -41 47 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16451.9 +/- 151.6
  Background counts = 36.0
  Rate = 0.4 +/- 0.003

[Wed Jul 18 06:40:03 2012] Off-axis axis estimate = 9.90'
[Wed Jul 18 06:43:20 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:43:20 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Wed Jul 18 06:43:20 2012] source mask rpix=2.6, npix_max = 38, mask sum = 41, frac = 1.056
[Wed Jul 18 06:43:20 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.38"
[Wed Jul 18 10:19:55 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 18 10:19:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src4.csv
[Wed Jul 18 10:19:55 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 18 10:19:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src4.csv
[Wed Jul 18 10:19:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 10:19:58 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 18 10:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 18 10:19:58 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 18 10:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 18 10:19:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:02:03 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.266869 pixels away
[Wed Jul 18 19:02:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:03 2012] Assessing source extent using major
[Wed Jul 18 19:02:03 2012] Source does appear to be extended
[Wed Jul 18 19:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:51 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:02:51 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Wed Jul 18 19:02:51 2012] source mask rpix=2.6, npix_max = 38, mask sum = 41, frac = 1.056
[Wed Jul 18 19:02:51 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.38"
[Wed Jul 18 22:23:02 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 18 22:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 22:23:02 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 18 22:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 22:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul 18 22:23:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:30 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.632907 pixels away
[Thu Jul 19 04:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:30 2012] Assessing source extent using major
[Thu Jul 19 04:52:30 2012] Source does appear to be extended
[Thu Jul 19 04:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:53:14 2012] Counts = 16451.880859, rescaling region sizes by 3.000000
[Thu Jul 19 04:53:14 2012] XMMSAS src. selection expression = ellipse(14171.908600, 27685.965240, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu Jul 19 04:53:14 2012] Writing source region out to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 19 04:53:14 2012] Extracting stamp from image fullrun_pn_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (51, 206) - (276, 431)
[Thu Jul 19 04:53:14 2012] XMMSAS bgd. selection expression = annulus(14171.908600, 27685.965240, 9787.500000, 19575.000000, X, Y) && !ellipse(25346.547260, 24725.189000, 409.975212, 409.975212, 0.000000, X, Y) && !ellipse(26726.158875, 13841.941559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17727.769424, 28619.632843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25929.944800, 25938.535000, 874.224025, 874.224025, 0.000000, X, Y) && !ellipse(23175.431549, 23795.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23826.482200, 23419.684200, 1159.280033, 1159.280033, 0.000000, X, Y) && !ellipse(22889.314000, 23605.054000, 1259.552036, 1259.552036, 0.000000, X, Y) && !ellipse(26678.855660, 32300.782840, 467.868294, 467.868294, 0.000000, X, Y) && !ellipse(31637.925903, 30045.840240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16190.528702, 30163.943909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30369.065800, 28405.850400, 315.267209, 315.267209, 0.000000, X, Y) && !ellipse(26394.288177, 27865.846130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24888.778200, 27693.796600, 1155.152033, 1155.152033, 0.000000, X, Y) && !ellipse(25552.582825, 27666.469360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20646.374100, 11988.261169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29074.948000, 27229.984000, 1280.120037, 1280.120037, 0.000000, X, Y) && !ellipse(26937.406281, 27184.207184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24280.205000, 27059.300000, 1145.600033, 1145.600033, 0.000000, X, Y) && !ellipse(29410.173126, 27338.257294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26240.846069, 26650.702942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.874847, 26827.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.009800, 26979.148000, 2310.304066, 2310.304066, 0.000000, X, Y) && !ellipse(29613.893524, 26569.002380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.595764, 25948.856567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.497070, 26069.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.356000, 25703.749000, 1100.168032, 1100.168032, 0.000000, X, Y) && !ellipse(23237.614990, 25262.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.442000, 24674.363400, 1260.296036, 1260.296036, 185.572000, X, Y) && !ellipse(23107.882294, 24826.971283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.119812, 24677.737396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.494000, 24557.331400, 1151.352033, 1151.352033, 0.000000, X, Y) && !ellipse(23287.954346, 24309.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22760.864000, 24534.426000, 1130.424033, 1130.424033, 311.879000, X, Y) && !ellipse(23679.233978, 24222.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22373.482605, 24231.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26666.662323, 24240.377075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30688.652039, 24030.321777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32685.413200, 24013.152600, 630.828868, 630.828868, 0.000000, X, Y) && !ellipse(24765.427704, 23971.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21244.591200, 22936.257800, 619.572018, 619.572018, 0.000000, X, Y) && !ellipse(24987.993500, 22312.724915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.680939, 22338.704376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24549.380005, 22238.981476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21803.696060, 23076.831726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29957.786194, 21071.926178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26214.127560, 21137.651800, 390.796811, 390.796811, 0.000000, X, Y) && !ellipse(16798.429520, 20919.219513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20999.651320, 21997.636600, 479.095214, 316.388809, 111.136376, X, Y) && !ellipse(18343.222200, 20828.572780, 540.390416, 540.390416, 0.000000, X, Y) && !ellipse(21307.649400, 20674.072000, 1498.248043, 1498.248043, 0.000000, X, Y) && !ellipse(29068.563782, 19596.383026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16638.011322, 17893.050308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29382.871460, 38322.084290, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 04:53:14 2012] Writing fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src4.gif
[Thu Jul 19 04:55:33 2012] Mean detx,y = (7117.02, 10046.75) 
[Thu Jul 19 04:55:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:01:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:01:33 2012] Setting source spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 19 05:01:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 19 05:37:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 05:37:53 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:23 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:23 2012] Error reading totcts from fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 19 14:41:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:24 2012] Using photon index=1.80, rate=0.373, arf fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src4.arf
[Thu Jul 19 14:41:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:24 2012] Updating source flux to 1.7e-12
[Thu Jul 19 14:51:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting