[Wed Jul 18 06:40:03 2012] Detection parameters:
  Position = (326.0, 298.8) = 8 57 30.03 -41 49 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.7 +/- 19.1
  Background counts = 105.8
  Rate = 0.005 +/- 0.0006

[Wed Jul 18 06:40:03 2012] Off-axis axis estimate = 2.00'
[Wed Jul 18 06:43:20 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:43:20 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Wed Jul 18 06:43:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.769
[Wed Jul 18 06:43:20 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.43"
[Wed Jul 18 10:19:56 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src38.ximg exists
[Wed Jul 18 10:19:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src38.csv
[Wed Jul 18 10:19:56 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Jul 18 10:19:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src38.csv
[Wed Jul 18 10:19:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 10:19:58 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Jul 18 10:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Jul 18 10:19:58 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Jul 18 10:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Jul 18 10:19:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:02:03 2012] Warning, spatial fit 38 centroid is now closest to src. 26
[Wed Jul 18 19:02:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:03 2012] Assessing source extent using major
[Wed Jul 18 19:02:03 2012] Source does appear to be extended
[Wed Jul 18 19:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:03 2012] Source is confused with source 42
[Wed Jul 18 19:02:51 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:02:51 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Wed Jul 18 19:02:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.769
[Wed Jul 18 19:02:51 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.43"
[Wed Jul 18 22:23:02 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src28.ximg exists
[Wed Jul 18 22:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src28.csv
[Wed Jul 18 22:23:02 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Jul 18 22:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src28.csv
[Wed Jul 18 22:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Jul 18 22:23:03 2012] fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Jul 18 22:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Jul 18 22:23:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:30 2012] Source 38 is offset by -6.795543 and -4.892775 pixels which is larger than
2 X fitted extent = 0.855315 x 0.855315, not incorporating fit results
[Thu Jul 19 04:52:30 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:30 2012] Assessing source extent using major
[Thu Jul 19 04:52:30 2012] Source does appear to be extended
[Thu Jul 19 04:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:53:15 2012] XMMSAS src. selection expression = ellipse(28316.595764, 25948.856567, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 04:53:15 2012] Writing source region out to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src38_src.reg
[Thu Jul 19 04:53:15 2012] Extracting stamp from image fullrun_pn_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (289, 261) - (364, 336)
[Thu Jul 19 04:53:15 2012] XMMSAS bgd. selection expression = annulus(28316.595764, 25948.856567, 1087.500000, 2175.000000, X, Y) && !ellipse(25929.944800, 25938.535000, 874.224025, 874.224025, 0.000000, X, Y) && !ellipse(30369.065800, 28405.850400, 315.267209, 315.267209, 0.000000, X, Y) && !ellipse(26394.288177, 27865.846130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25552.582825, 27666.469360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29074.948000, 27229.984000, 1280.120037, 1280.120037, 0.000000, X, Y) && !ellipse(26937.406281, 27184.207184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29410.173126, 27338.257294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26240.846069, 26650.702942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.874847, 26827.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.009800, 26979.148000, 2310.304066, 2310.304066, 0.000000, X, Y) && !ellipse(29613.893524, 26569.002380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.497070, 26069.572784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.119812, 24677.737396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26666.662323, 24240.377075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30688.652039, 24030.321777, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 04:53:15 2012] Writing fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src38.gif
[Thu Jul 19 05:15:20 2012] Mean detx,y = (-2862.86, 65.88) 
[Thu Jul 19 05:15:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:15:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:15:43 2012] Setting source spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jul 19 05:15:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Jul 19 06:22:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 06:22:59 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:23 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:23 2012] Error reading totcts from fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jul 19 14:41:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:24 2012] Using photon index=1.80, rate=0.00453, arf fullrun_pn_xmm0112870101_pi300-10000_pass1_cl_src38.arf
[Thu Jul 19 14:41:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:24 2012] Updating source flux to 1.5e-14
[Thu Jul 19 14:51:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting