[Wed Jul 18 06:41:21 2012] Detection parameters:
  Position = (313.4, 297.0) = 8 57 34.94 -41 49 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.9 +/- 14.6
  Background counts = 41.5
  Rate = 0.002 +/- 0.0003

[Wed Jul 18 06:41:21 2012] Off-axis axis estimate = 1.09'
[Wed Jul 18 14:58:07 2012] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 14:58:07 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Wed Jul 18 14:58:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.130
[Wed Jul 18 14:58:07 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 6.97"
[Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src50.ximg exists
[Wed Jul 18 19:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src50.csv
[Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed Jul 18 19:01:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src50.csv
[Wed Jul 18 19:01:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:01:43 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed Jul 18 19:01:43 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed Jul 18 19:01:43 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Wed Jul 18 19:02:34 2012] Source 60 is offset by 6.833963 and 2.362110 pixels which is larger than
2 X fitted extent = 2.578487 x 2.578487, not incorporating fit results
[Wed Jul 18 19:02:34 2012] Source 60 is offset by 0.327092 and -1.551936 pixels which is larger than
2 X fitted extent = 1.240878 x 1.240878, not incorporating fit results
[Wed Jul 18 19:02:34 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:34 2012] Assessing source extent using major
[Wed Jul 18 19:02:34 2012] Source does appear to be extended
[Wed Jul 18 19:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:34 2012] Source is confused with source 56
[Thu Jul 19 01:59:08 2012] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 01:59:08 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Thu Jul 19 01:59:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.130
[Thu Jul 19 01:59:08 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 6.97"
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src39.ximg exists
[Thu Jul 19 04:52:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src39.csv
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Jul 19 04:52:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src39.csv
[Thu Jul 19 04:52:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Jul 19 04:52:13 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Jul 19 04:52:59 2012] Source 60 is offset by 6.833963 and 2.401053 pixels which is larger than
2 X fitted extent = 2.651678 x 2.651678, not incorporating fit results
[Thu Jul 19 04:52:59 2012] Source 60 is offset by 0.336353 and -1.551936 pixels which is larger than
2 X fitted extent = 1.227080 x 1.227080, not incorporating fit results
[Thu Jul 19 04:52:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:59 2012] Assessing source extent using major
[Thu Jul 19 04:52:59 2012] Source does appear to be extended
[Thu Jul 19 04:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 13:18:22 2012] XMMSAS src. selection expression = ellipse(27219.120819, 25792.265594, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 13:18:22 2012] Writing source region out to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src60_src.reg
[Thu Jul 19 13:18:22 2012] Extracting stamp from image fullrun_mos2_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (276, 260) - (351, 335)
[Thu Jul 19 13:18:22 2012] XMMSAS bgd. selection expression = annulus(27219.120819, 25792.265594, 1087.500000, 2175.000000, X, Y) && !ellipse(25335.504000, 24734.126000, 357.636810, 357.636810, 0.000000, X, Y) && !ellipse(24669.435120, 25371.852325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.925964, 23776.023071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23910.931200, 23231.805200, 1169.528034, 1169.528034, 0.000000, X, Y) && !ellipse(25991.299866, 25271.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.910065, 25965.142517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25289.790680, 26304.264099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25291.744781, 25794.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26590.654144, 26577.134735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.818000, 27025.578000, 1091.592031, 1091.592031, 0.000000, X, Y) && !ellipse(25134.813965, 27341.987610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.760437, 24404.646393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.532532, 22917.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.762000, 23286.746000, 1207.224035, 1207.224035, 0.000000, X, Y) && !ellipse(26602.750458, 27003.675812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.359497, 27496.013824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.794250, 27523.065918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.811981, 26393.494324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29172.538000, 27040.254000, 1217.424035, 1217.424035, 0.000000, X, Y)
[Thu Jul 19 13:18:22 2012] Writing fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src60.gif
[Thu Jul 19 13:33:30 2012] Mean detx,y = (2104.67, -771.60) 
[Thu Jul 19 13:33:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 13:33:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 13:33:44 2012] Setting source spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Thu Jul 19 13:33:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Thu Jul 19 14:29:29 2012] Not generating rmf since there are only 75 counts
[Thu Jul 19 14:29:29 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:27 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:27 2012] Error reading totcts from fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Thu Jul 19 14:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:28 2012] Using photon index=1.80, rate=0.00166, arf fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src60.arf
[Thu Jul 19 14:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:28 2012] Updating source flux to 1.7e-14
[Thu Jul 19 14:47:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting