[Wed Jul 18 06:41:21 2012] Detection parameters:
  Position = (289.5, 314.8) = 8 57 44.26 -41 48 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 13.2
  Background counts = 27.4
  Rate = 0.002 +/- 0.0003

[Wed Jul 18 06:41:21 2012] Off-axis axis estimate = 1.36'
[Wed Jul 18 14:58:07 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 14:58:07 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Wed Jul 18 14:58:07 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.098
[Wed Jul 18 14:58:07 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.11"
[Wed Jul 18 19:01:42 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src55.ximg exists
[Wed Jul 18 19:01:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src55.csv
[Wed Jul 18 19:01:42 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src55_1.ximg exists
[Wed Jul 18 19:01:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src55.csv
[Wed Jul 18 19:01:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:01:44 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Wed Jul 18 19:01:44 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Wed Jul 18 19:01:44 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Wed Jul 18 19:02:34 2012] Warning, spatial fit 55 centroid is now closest to src. 46
[Wed Jul 18 19:02:34 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:34 2012] Assessing source extent using major
[Wed Jul 18 19:02:34 2012] Source does appear to be extended
[Wed Jul 18 19:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:34 2012] Source is confused with source 46
[Thu Jul 19 01:59:08 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 01:59:08 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Thu Jul 19 01:59:08 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.098
[Thu Jul 19 01:59:08 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 7.11"
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src41.ximg exists
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu Jul 19 04:52:12 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src41 appears to have run properly
[Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu Jul 19 04:52:13 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Thu Jul 19 04:52:59 2012] Source 48 is offset by -2.634897 and 5.094731 pixels which is larger than
2 X fitted extent = 0.816795 x 0.816795, not incorporating fit results
[Thu Jul 19 04:52:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:59 2012] Assessing source extent using major
[Thu Jul 19 04:52:59 2012] Source does appear to be extended
[Thu Jul 19 04:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 13:18:22 2012] XMMSAS src. selection expression = ellipse(25134.813965, 27341.987610, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 13:18:22 2012] Writing source region out to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src48_src.reg
[Thu Jul 19 13:18:22 2012] Extracting stamp from image fullrun_mos2_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (252, 277) - (327, 352)
[Thu Jul 19 13:18:22 2012] XMMSAS bgd. selection expression = annulus(25134.813965, 27341.987610, 1087.500000, 2175.000000, X, Y) && !ellipse(24669.435120, 25371.852325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22541.735600, 24474.103360, 1252.840036, 1252.840036, 0.000000, X, Y) && !ellipse(25991.299866, 25271.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.910065, 25965.142517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25289.790680, 26304.264099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25291.744781, 25794.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21704.402000, 23210.250000, 2294.144066, 2294.144066, 0.000000, X, Y) && !ellipse(23896.890625, 24994.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26590.654144, 26577.134735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.818000, 27025.578000, 1091.592031, 1091.592031, 0.000000, X, Y) && !ellipse(27219.120819, 25792.265594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.813995, 26162.331543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.760437, 24404.646393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26602.750458, 27003.675812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.359497, 27496.013824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.794250, 27523.065918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.811981, 26393.494324, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 13:18:22 2012] Writing fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src48.gif
[Thu Jul 19 13:34:07 2012] Mean detx,y = (1407.63, -3180.56) 
[Thu Jul 19 13:34:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 13:34:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 13:34:20 2012] Setting source spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Jul 19 13:34:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu Jul 19 14:29:46 2012] Not generating rmf since there are only 69 counts
[Thu Jul 19 14:29:46 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:27 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:27 2012] Error reading totcts from fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Jul 19 14:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:28 2012] Using photon index=1.80, rate=0.00156, arf fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src48.arf
[Thu Jul 19 14:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:28 2012] Updating source flux to 1.6e-14
[Thu Jul 19 14:47:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting