[Wed Jul 18 06:41:20 2012] Detection parameters:
  Position = (163.2, 318.8) = 8 58 33.39 -41 47 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6848.7 +/- 99.0
  Background counts = 12.6
  Rate = 0.3 +/- 0.004

[Wed Jul 18 06:41:21 2012] Off-axis axis estimate = 9.92'
[Wed Jul 18 14:58:07 2012] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 14:58:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 14:58:07 2012] Initial guess for spatial extent in simple fitting = 11.39"
[Wed Jul 18 14:58:07 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Wed Jul 18 14:58:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.39"
[Wed Jul 18 19:01:40 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 18 19:01:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 19:01:40 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 18 19:01:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src1.csv
[Wed Jul 18 19:01:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:01:42 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 18 19:01:42 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 18 19:01:42 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 18 19:02:34 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.874996 pixels away
[Wed Jul 18 19:02:34 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:34 2012] Assessing source extent using major
[Wed Jul 18 19:02:34 2012] Source does appear to be extended
[Wed Jul 18 19:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 01:59:08 2012] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 01:59:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 01:59:08 2012] Initial guess for spatial extent in simple fitting = 11.39"
[Thu Jul 19 01:59:08 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Thu Jul 19 01:59:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.39"
[Thu Jul 19 04:52:11 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 19 04:52:11 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 19 04:52:11 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 19 04:52:12 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 19 04:52:59 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.835382 pixels away
[Thu Jul 19 04:52:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:59 2012] Assessing source extent using major
[Thu Jul 19 04:52:59 2012] Source does appear to be extended
[Thu Jul 19 04:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 13:18:21 2012] Counts = 6848.662109, rescaling region sizes by 2.000000
[Thu Jul 19 13:18:21 2012] XMMSAS src. selection expression = ellipse(14146.733612, 27686.002411, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jul 19 13:18:21 2012] Writing source region out to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 19 13:18:21 2012] Extracting stamp from image fullrun_mos2_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (88, 244) - (238, 394)
[Thu Jul 19 13:18:21 2012] XMMSAS bgd. selection expression = annulus(14146.733612, 27686.002411, 4350.000000, 8700.000000, X, Y) && !ellipse(17713.673874, 28744.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22421.371485, 23606.304511, 1216.464035, 1077.683045, 182.839100, X, Y) && !ellipse(23171.032166, 23955.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23910.931200, 23231.805200, 1169.528034, 1169.528034, 0.000000, X, Y) && !ellipse(23183.293091, 23499.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21125.820000, 22446.788000, 473.899214, 473.899214, 0.000000, X, Y) && !ellipse(22541.735600, 24474.103360, 1252.840036, 1252.840036, 0.000000, X, Y) && !ellipse(21171.264600, 22626.758000, 1145.496033, 1145.496033, 0.000000, X, Y) && !ellipse(22950.818726, 22716.347778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21704.402000, 23210.250000, 2294.144066, 2294.144066, 0.000000, X, Y) && !ellipse(18320.788800, 20845.365600, 413.822412, 218.502406, 355.507074, X, Y) && !ellipse(21475.462000, 22964.832000, 1845.344053, 1845.344053, 0.000000, X, Y) && !ellipse(22995.385600, 22414.144000, 1157.080033, 1157.080033, 0.000000, X, Y) && !ellipse(21098.232000, 22373.870000, 672.422419, 672.422419, 0.000000, X, Y) && !ellipse(23206.813995, 26162.331543, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 13:18:21 2012] Writing fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src4.gif
[Thu Jul 19 13:18:29 2012] Mean detx,y = (-7096.01, -10131.78) 
[Thu Jul 19 13:18:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 13:21:29 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 13:21:29 2012] Setting source spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 19 13:21:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 19 13:37:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 13:37:44 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:27 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:27 2012] Error reading totcts from fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 19 14:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:28 2012] Using photon index=1.80, rate=0.259, arf fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src4.arf
[Thu Jul 19 14:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:28 2012] Updating source flux to 4.3e-12
[Thu Jul 19 14:47:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 19 14:51:27 2012] xmm0112870101/analysis//spectral/fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete