[Wed Jul 18 06:41:20 2012] Detection parameters:
  Position = (276.1, 267.1) = 8 57 49.48 -41 51 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.6 +/- 20.4
  Background counts = 58.4
  Rate = 0.004 +/- 0.0004

[Wed Jul 18 06:41:21 2012] Off-axis axis estimate = 2.79'
[Wed Jul 18 14:58:07 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 14:58:07 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Wed Jul 18 14:58:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.757
[Wed Jul 18 14:58:07 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.82"
[Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jul 18 19:01:41 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src14 appears to have run properly
[Wed Jul 18 19:01:42 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jul 18 19:01:42 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jul 18 19:01:42 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Jul 18 19:02:34 2012] Spatial fit model total counts = 1545.300000, observed total counts = 1505.000000
[Wed Jul 18 19:02:34 2012] Offset between fit and detection position for source 31 = 1.804605 pixels
[Wed Jul 18 19:02:34 2012] Warning, changing simple spatial fit ID from 14 to 13
[Wed Jul 18 19:02:34 2012] 1565.491000 total counts/ 1378.300000 bgd. counts: snr = 5.042119
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.804605 pixels
  Position = (276.5, 268.9) = 8 57 49.31 -41 51 30.2
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 187.2 +/- 39.6
  Background counts = 1378.3
  Rate = 0.004 +/- 0.0008
[Wed Jul 18 19:02:34 2012] Spatial fit model total counts = 1454.420000, observed total counts = 1441.000000
[Wed Jul 18 19:02:34 2012] Offset between fit and detection position for source 31 = 1.691734 pixels
[Wed Jul 18 19:02:34 2012] Warning, changing simple spatial fit ID from 13 to 14
[Wed Jul 18 19:02:34 2012] 1453.858000 total counts/ 1321.820000 bgd. counts: snr = 3.631724
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.691734 pixels
  Position = (275.4, 267.6) = 8 57 49.74 -41 51 35.8
  Extent = 14.6 (12.6-15.6)", rotation angle = 0
  Source counts = 132.0 +/- 38.1
  Background counts = 1321.8
  Rate = 0.003 +/- 0.0008
[Wed Jul 18 19:02:34 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:34 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:02:34 2012] Source does appear to be extended
[Wed Jul 18 19:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:34 2012] Source is confused with source 27
[Thu Jul 19 01:59:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 01:59:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 01:59:08 2012] Initial guess for spatial extent in simple fitting = 14.62"
[Thu Jul 19 01:59:08 2012] source mask rpix=3.4, npix_max = 59, mask sum = 48, frac = 0.805
[Thu Jul 19 01:59:08 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 14.62"
[Thu Jul 19 04:52:11 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src12.ximg exists
[Thu Jul 19 04:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src12.csv
[Thu Jul 19 04:52:11 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Jul 19 04:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src12.csv
[Thu Jul 19 04:52:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jul 19 04:52:12 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Jul 19 04:52:59 2012] Warning, spatial fit 12 centroid is now closest to src. 26
[Thu Jul 19 04:52:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:59 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:59 2012] Source does appear to be extended
[Thu Jul 19 04:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 13:18:21 2012] XMMSAS src. selection expression = ellipse(23910.931200, 23231.805200, 877.146025, 877.146025, 0.000000, X, Y)
[Thu Jul 19 13:18:21 2012] Writing source region out to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src31_src.reg
[Thu Jul 19 13:18:21 2012] Extracting stamp from image fullrun_mos2_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (225, 217) - (326, 318)
[Thu Jul 19 13:18:21 2012] XMMSAS bgd. selection expression = annulus(23910.931200, 23231.805200, 1461.910042, 2923.820084, X, Y) && !ellipse(25335.504000, 24734.126000, 357.636810, 357.636810, 0.000000, X, Y) && !ellipse(22421.371485, 23606.304511, 1216.464035, 1077.683045, 182.839100, X, Y) && !ellipse(24669.435120, 25371.852325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23171.032166, 23955.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.925964, 23776.023071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.293091, 23499.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21125.820000, 22446.788000, 473.899214, 473.899214, 0.000000, X, Y) && !ellipse(22541.735600, 24474.103360, 1252.840036, 1252.840036, 0.000000, X, Y) && !ellipse(25991.299866, 25271.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.910065, 25965.142517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25289.790680, 26304.264099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25291.744781, 25794.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21171.264600, 22626.758000, 1145.496033, 1145.496033, 0.000000, X, Y) && !ellipse(22950.818726, 22716.347778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21704.402000, 23210.250000, 2294.144066, 2294.144066, 0.000000, X, Y) && !ellipse(23896.890625, 24994.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21475.462000, 22964.832000, 1845.344053, 1845.344053, 0.000000, X, Y) && !ellipse(26590.654144, 26577.134735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.818000, 27025.578000, 1091.592031, 1091.592031, 0.000000, X, Y) && !ellipse(22995.385600, 22414.144000, 1157.080033, 1157.080033, 0.000000, X, Y) && !ellipse(21098.232000, 22373.870000, 672.422419, 672.422419, 0.000000, X, Y) && !ellipse(27219.120819, 25792.265594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.813995, 26162.331543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.760437, 24404.646393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.532532, 22917.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.762000, 23286.746000, 1207.224035, 1207.224035, 0.000000, X, Y) && !ellipse(26602.750458, 27003.675812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.811981, 26393.494324, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 13:18:21 2012] Writing fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src31.gif
[Thu Jul 19 13:23:56 2012] Mean detx,y = (-2017.43, -748.89) 
[Thu Jul 19 13:23:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 13:24:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 13:24:08 2012] Setting source spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jul 19 13:24:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jul 19 14:41:27 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:27 2012] Error reading totcts from fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jul 19 14:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:28 2012] Using photon index=1.80, rate=0.00275, arf fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src31.arf
[Thu Jul 19 14:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:28 2012] Updating source flux to 2.6e-14
[Thu Jul 19 14:47:47 2012] Flag c found in src. 31 procflags, skipping spectral fitting