[Wed Jul 18 06:41:20 2012] Detection parameters:
  Position = (251.6, 270.1) = 8 57 58.99 -41 51 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.5 +/- 16.6
  Background counts = 35.1
  Rate = 0.003 +/- 0.0004

[Wed Jul 18 06:41:21 2012] Off-axis axis estimate = 3.97'
[Wed Jul 18 14:58:07 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 14:58:07 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Wed Jul 18 14:58:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Wed Jul 18 14:58:07 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.41"
[Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src29.ximg exists
[Wed Jul 18 19:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src29.csv
[Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Jul 18 19:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src29.csv
[Wed Jul 18 19:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 19:01:43 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Jul 18 19:01:43 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Jul 18 19:01:43 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Jul 18 19:02:34 2012] Warning, spatial fit 29 centroid is now closest to src. 30
[Wed Jul 18 19:02:34 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:34 2012] Assessing source extent using major
[Wed Jul 18 19:02:34 2012] Source does appear to be extended
[Wed Jul 18 19:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:34 2012] Source is confused with source 29
[Thu Jul 19 01:59:08 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 01:59:08 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Jul 19 01:59:08 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Thu Jul 19 01:59:08 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.41"
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jul 19 04:52:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src25.csv
[Thu Jul 19 04:52:12 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jul 19 04:52:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src25.csv
[Thu Jul 19 04:52:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jul 19 04:52:13 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Jul 19 04:52:59 2012] Spatial fit model total counts = 1964.470000, observed total counts = 1956.000000
[Thu Jul 19 04:52:59 2012] Offset between fit and detection position for source 28 = 3.163746 pixels
[Thu Jul 19 04:52:59 2012] Warning, changing simple spatial fit ID from 25 to 8
[Thu Jul 19 04:52:59 2012] 2047.737000 total counts/ 1334.720000 bgd. counts: snr = 19.516629
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 3.163746 pixels
  Position = (250.0, 267.3) = 8 57 59.62 -41 51 36.8
  Extent = 28.7 (28.6-57.4)", rotation angle = 0
  Source counts = 713.0 +/- 45.3
  Background counts = 1334.7
  Rate = 0.01 +/- 0.0009
[Thu Jul 19 04:52:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:59 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:59 2012] Source does appear to be extended
[Thu Jul 19 04:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 13:18:22 2012] XMMSAS src. selection expression = ellipse(21704.402000, 23210.250000, 1720.608050, 1720.608050, 0.000000, X, Y)
[Thu Jul 19 13:18:22 2012] Writing source region out to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src28_src.reg
[Thu Jul 19 13:18:22 2012] Extracting stamp from image fullrun_mos2_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (151, 168) - (349, 366)
[Thu Jul 19 13:18:22 2012] XMMSAS bgd. selection expression = annulus(21704.402000, 23210.250000, 2867.680083, 5735.360165, X, Y) && !ellipse(25335.504000, 24734.126000, 357.636810, 357.636810, 0.000000, X, Y) && !ellipse(17713.673874, 28744.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22421.371485, 23606.304511, 1216.464035, 1077.683045, 182.839100, X, Y) && !ellipse(24669.435120, 25371.852325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23171.032166, 23955.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.925964, 23776.023071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23910.931200, 23231.805200, 1169.528034, 1169.528034, 0.000000, X, Y) && !ellipse(23183.293091, 23499.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21125.820000, 22446.788000, 473.899214, 473.899214, 0.000000, X, Y) && !ellipse(22541.735600, 24474.103360, 1252.840036, 1252.840036, 0.000000, X, Y) && !ellipse(25991.299866, 25271.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.910065, 25965.142517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25289.790680, 26304.264099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25291.744781, 25794.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21171.264600, 22626.758000, 1145.496033, 1145.496033, 0.000000, X, Y) && !ellipse(22950.818726, 22716.347778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18320.788800, 20845.365600, 413.822412, 218.502406, 355.507074, X, Y) && !ellipse(23896.890625, 24994.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21475.462000, 22964.832000, 1845.344053, 1845.344053, 0.000000, X, Y) && !ellipse(26590.654144, 26577.134735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27003.818000, 27025.578000, 1091.592031, 1091.592031, 0.000000, X, Y) && !ellipse(22995.385600, 22414.144000, 1157.080033, 1157.080033, 0.000000, X, Y) && !ellipse(21098.232000, 22373.870000, 672.422419, 672.422419, 0.000000, X, Y) && !ellipse(27219.120819, 25792.265594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23206.813995, 26162.331543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.813965, 27341.987610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.760437, 24404.646393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.532532, 22917.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.762000, 23286.746000, 1207.224035, 1207.224035, 0.000000, X, Y) && !ellipse(26602.750458, 27003.675812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.359497, 27496.013824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.794250, 27523.065918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.811981, 26393.494324, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 13:18:22 2012] Writing fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src28.gif
[Thu Jul 19 13:28:19 2012] Mean detx,y = (-3472.97, -1756.09) 
[Thu Jul 19 13:28:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 13:29:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 13:29:46 2012] Setting source spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jul 19 13:29:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jul 19 14:41:27 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:27 2012] Error reading totcts from fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jul 19 14:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:28 2012] Using photon index=1.80, rate=0.0149, arf fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src28.arf
[Thu Jul 19 14:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:28 2012] Updating source flux to 1.5e-13
[Thu Jul 19 14:47:47 2012] Flag c found in src. 28 procflags, skipping spectral fitting