[Wed Jul 18 06:41:20 2012] Detection parameters: Position = (258.8, 285.9) = 8 57 56.21 -41 50 14.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 136.3 +/- 17.8 Background counts = 38.3 Rate = 0.003 +/- 0.0004 [Wed Jul 18 06:41:21 2012] Off-axis axis estimate = 3.01' [Wed Jul 18 14:58:07 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting [Wed Jul 18 14:58:07 2012] Initial guess for spatial extent in simple fitting = 7.94" [Wed Jul 18 14:58:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.925 [Wed Jul 18 14:58:07 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.94" [Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src21.ximg exists [Wed Jul 18 19:01:41 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src21_1.ximg exists [Wed Jul 18 19:01:41 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_src21 appears to have run properly [Wed Jul 18 19:01:43 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Wed Jul 18 19:01:43 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Wed Jul 18 19:01:43 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly [Wed Jul 18 19:02:34 2012] Spatial fit model total counts = 1338.690000, observed total counts = 1335.000000 [Wed Jul 18 19:02:34 2012] Offset between fit and detection position for source 23 = 3.567635 pixels [Wed Jul 18 19:02:34 2012] Warning, changing simple spatial fit ID from 21 to 8 [Wed Jul 18 19:02:34 2012] 1254.977000 total counts/ 966.640000 bgd. counts: snr = 9.274019 Spatial fit parameters: Offset between fit and detection position for source 23 = 3.567635 pixels Position = (260.2, 282.6) = 8 57 55.67 -41 50 30.2 Extent = 15.9 (15.3-31.8)", rotation angle = 0 Source counts = 288.3 +/- 35.4 Background counts = 966.6 Rate = 0.006 +/- 0.0007 [Wed Jul 18 19:02:34 2012] Spatial fit model total counts = 1003.790000, observed total counts = 999.000000 [Wed Jul 18 19:02:34 2012] Offset between fit and detection position for source 23 = 1.932396 pixels [Wed Jul 18 19:02:34 2012] Warning, changing simple spatial fit ID from 8 to 21 [Wed Jul 18 19:02:34 2012] 1031.027000 total counts/ 810.824000 bgd. counts: snr = 7.733212 Spatial fit parameters: Offset between fit and detection position for source 23 = 1.932396 pixels Position = (258.8, 281.3) = 8 57 56.21 -41 50 36.1 Extent = 15.9 (15.5-31.7)", rotation angle = 0 Source counts = 220.2 +/- 32.1 Background counts = 810.8 Rate = 0.005 +/- 0.0007 [Wed Jul 18 19:02:34 2012] Vigneting correction estimate = 1.000000 [Wed Jul 18 19:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jul 18 19:02:34 2012] Assessing source extent using major axis lower bound [Wed Jul 18 19:02:34 2012] Source does appear to be extended [Wed Jul 18 19:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jul 18 19:02:34 2012] Source is confused with source 29 [Thu Jul 19 01:59:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Jul 19 01:59:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Jul 19 01:59:08 2012] Initial guess for spatial extent in simple fitting = 15.87" [Thu Jul 19 01:59:08 2012] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.930 [Thu Jul 19 01:59:08 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 15.87" [Thu Jul 19 04:52:11 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src17.ximg exists [Thu Jul 19 04:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src17.csv [Thu Jul 19 04:52:11 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src17_1.ximg exists [Thu Jul 19 04:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src17.csv [Thu Jul 19 04:52:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Thu Jul 19 04:52:13 2012] fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Thu Jul 19 04:52:13 2012] Fit fullrun_mos2_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly [Thu Jul 19 04:52:59 2012] Source 23 is offset by -2.338338 and 3.126598 pixels which is larger than 2 X fitted extent = 1.145352 x 1.145352, not incorporating fit results [Thu Jul 19 04:52:59 2012] Spatial fit model total counts = 1997.150000, observed total counts = 1999.000000 [Thu Jul 19 04:52:59 2012] Offset between fit and detection position for source 23 = 1.059529 pixels [Thu Jul 19 04:52:59 2012] 1779.822000 total counts/ 1522.250000 bgd. counts: snr = 6.601698 Spatial fit parameters: Offset between fit and detection position for source 23 = 1.059529 pixels Position = (259.7, 281.9) = 8 57 55.87 -41 50 33.6 Extent = 15.7 (12.1-21.9)", rotation angle = 0 Source counts = 257.6 +/- 42.2 Background counts = 1522.2 Rate = 0.005 +/- 0.0009 [Thu Jul 19 04:52:59 2012] Vigneting correction estimate = 1.000000 [Thu Jul 19 04:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 19 04:52:59 2012] Assessing source extent using major axis lower bound [Thu Jul 19 04:52:59 2012] Source does appear to be extended [Thu Jul 19 04:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 19 13:18:21 2012] XMMSAS src. selection expression = ellipse(22541.735600, 24474.103360, 939.630027, 939.630027, 0.000000, X, Y) [Thu Jul 19 13:18:21 2012] Writing source region out to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src23_src.reg [Thu Jul 19 13:18:21 2012] Extracting stamp from image fullrun_mos2_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (206, 228) - (314, 336) [Thu Jul 19 13:18:21 2012] XMMSAS bgd. selection expression = annulus(22541.735600, 24474.103360, 1566.050045, 3132.100090, X, Y) && !ellipse(25335.504000, 24734.126000, 357.636810, 357.636810, 0.000000, X, Y) && !ellipse(22421.371485, 23606.304511, 1216.464035, 1077.683045, 182.839100, X, Y) && !ellipse(24669.435120, 25371.852325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23171.032166, 23955.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24301.925964, 23776.023071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23910.931200, 23231.805200, 1169.528034, 1169.528034, 0.000000, X, Y) && !ellipse(23183.293091, 23499.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21125.820000, 22446.788000, 473.899214, 473.899214, 0.000000, X, Y) && !ellipse(25991.299866, 25271.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.910065, 25965.142517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25289.790680, 26304.264099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25291.744781, 25794.325897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21171.264600, 22626.758000, 1145.496033, 1145.496033, 0.000000, X, Y) && !ellipse(22950.818726, 22716.347778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21704.402000, 23210.250000, 2294.144066, 2294.144066, 0.000000, X, Y) && !ellipse(23896.890625, 24994.113342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21475.462000, 22964.832000, 1845.344053, 1845.344053, 0.000000, X, Y) && !ellipse(22995.385600, 22414.144000, 1157.080033, 1157.080033, 0.000000, X, Y) && !ellipse(21098.232000, 22373.870000, 672.422419, 672.422419, 0.000000, X, Y) && !ellipse(23206.813995, 26162.331543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.813965, 27341.987610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.760437, 24404.646393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.532532, 22917.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24878.762000, 23286.746000, 1207.224035, 1207.224035, 0.000000, X, Y) && !ellipse(24648.359497, 27496.013824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.794250, 27523.065918, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jul 19 13:18:21 2012] Writing fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src23.gif [Thu Jul 19 13:25:01 2012] Mean detx,y = (-2324.34, -2398.94) [Thu Jul 19 13:25:03 2012] Setting backscal keywords in source and bgd. spectrum [Thu Jul 19 13:25:21 2012] Binned source spectrum to 10 counts/bin [Thu Jul 19 13:25:21 2012] Setting source spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Thu Jul 19 13:25:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src23_bgd.pi.gz [Thu Jul 19 14:41:27 2012] Updating aperture counts using extracted products [Thu Jul 19 14:41:27 2012] Error reading totcts from fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Thu Jul 19 14:41:28 2012] Calculating source flux in energy range 0.30-8.00 [Thu Jul 19 14:41:28 2012] Using photon index=1.80, rate=0.00537, arf fullrun_mos2_xmm0112870101_pi300-10000_pass1_cl_src23.arf [Thu Jul 19 14:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jul 19 14:41:28 2012] Updating source flux to 5.1e-14 [Thu Jul 19 14:47:47 2012] Flag b found in src. 23 procflags, skipping spectral fitting [Thu Jul 19 14:47:47 2012] Flag c found in src. 23 procflags, skipping spectral fitting