[Wed Jul 18 06:40:38 2012] Detection parameters:
  Position = (262.6, 250.4) = 8 57 54.75 -41 52 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 13.7
  Background counts = 43.1
  Rate = 0.001 +/- 0.0003

[Wed Jul 18 06:40:38 2012] Off-axis axis estimate = 4.35'
[Wed Jul 18 10:19:59 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 10:19:59 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Jul 18 10:19:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Wed Jul 18 10:19:59 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 8.60"
[Wed Jul 18 14:58:05 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src64.ximg exists
[Wed Jul 18 14:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src64.csv
[Wed Jul 18 14:58:05 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src64_1.ximg exists
[Wed Jul 18 14:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src64.csv
[Wed Jul 18 14:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 14:58:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Wed Jul 18 14:58:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Wed Jul 18 14:58:07 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Wed Jul 18 19:02:19 2012] Spatial fit model total counts = 810.295000, observed total counts = 807.000000
[Wed Jul 18 19:02:19 2012] Offset between fit and detection position for source 66 = 7.508254 pixels
[Wed Jul 18 19:02:19 2012] 826.941900 total counts/ 767.361000 bgd. counts: snr = 2.150836
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 7.508254 pixels
  Position = (264.2, 243.1) = 8 57 54.10 -41 53 22.3
  Extent = 17.2 (17.2-34.4)", rotation angle = 0
  Source counts = 59.6 +/- 28.8
  Background counts = 767.4
  Rate = 0.001 +/- 0.0006
[Wed Jul 18 19:02:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:19 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:02:19 2012] Source does appear to be extended
[Wed Jul 18 19:02:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 22:23:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 22:23:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 22:23:04 2012] Initial guess for spatial extent in simple fitting = 17.20"
[Wed Jul 18 22:23:04 2012] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.020
[Wed Jul 18 22:23:04 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 17.20"
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src51.ximg exists
[Thu Jul 19 01:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src51.csv
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu Jul 19 01:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src51.csv
[Thu Jul 19 01:59:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Jul 19 01:59:08 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Thu Jul 19 04:52:47 2012] Warning, spatial fit 51 centroid is now closest to src. 64
[Thu Jul 19 04:52:47 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:47 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:47 2012] Source does appear to be extended
[Thu Jul 19 04:52:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:52:47 2012] Source is confused with source 64
[Thu Jul 19 07:32:05 2012] XMMSAS src. selection expression = ellipse(22938.151400, 21100.356000, 1032.216030, 1032.216030, 0.000000, X, Y)
[Thu Jul 19 07:32:05 2012] Writing source region out to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src66_src.reg
[Thu Jul 19 07:32:05 2012] Extracting stamp from image fullrun_mos1_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (205, 184) - (324, 302)
[Thu Jul 19 07:32:05 2012] XMMSAS bgd. selection expression = annulus(22938.151400, 21100.356000, 1720.360050, 3440.720099, X, Y) && !ellipse(25330.414400, 24723.576600, 363.732010, 363.732010, 0.000000, X, Y) && !ellipse(21034.720000, 22392.012000, 335.670410, 335.670410, 0.000000, X, Y) && !ellipse(22735.972000, 24226.370000, 2710.776078, 2710.776078, 0.000000, X, Y) && !ellipse(23565.042000, 23352.586000, 2442.368070, 2442.368070, 0.000000, X, Y) && !ellipse(24406.908000, 25407.818000, 2307.984066, 2307.984066, 0.000000, X, Y) && !ellipse(21548.660000, 23043.176000, 1661.200048, 1661.200048, 0.000000, X, Y) && !ellipse(21049.002655, 22005.842026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21306.432968, 22912.883667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23092.846863, 25090.079376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.210000, 23448.248000, 1317.384038, 1317.384038, 0.000000, X, Y) && !ellipse(22702.788200, 22361.216000, 1137.008033, 1137.008033, 0.000000, X, Y) && !ellipse(24315.835663, 24925.398529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23346.412781, 24490.316223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.510000, 23909.418000, 1349.200039, 1349.200039, 0.000000, X, Y) && !ellipse(22128.272000, 23472.990000, 1356.712039, 1356.712039, 0.000000, X, Y) && !ellipse(18373.408829, 20813.059494, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22695.940000, 22555.788000, 2221.840064, 2221.840064, 0.000000, X, Y) && !ellipse(25921.310638, 24923.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.399704, 22695.898743, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 07:32:05 2012] Writing fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src66.gif
[Thu Jul 19 07:58:30 2012] Mean detx,y = (520.30, 3871.88) 
[Thu Jul 19 07:58:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 07:58:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 07:58:53 2012] Setting source spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Thu Jul 19 07:58:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Thu Jul 19 13:17:56 2012] Not generating rmf since there are only 59 counts
[Thu Jul 19 13:17:56 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:26 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:26 2012] Error reading totcts from fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Thu Jul 19 14:41:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:27 2012] Using photon index=1.80, rate=0.00124, arf fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src66.arf
[Thu Jul 19 14:41:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:27 2012] Updating source flux to 1.2e-14
[Thu Jul 19 14:41:30 2012] Flag c found in src. 66 procflags, skipping spectral fitting
[Thu Jul 19 14:41:30 2012] Source 66 has fewer than 100.000000 counts, skipping spectral fitting