[Wed Jul 18 06:40:38 2012] Detection parameters:
  Position = (260.0, 257.1) = 8 57 55.72 -41 52 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.2 +/- 17.5
  Background counts = 44.6
  Rate = 0.003 +/- 0.0004

[Wed Jul 18 06:40:38 2012] Off-axis axis estimate = 4.09'
[Wed Jul 18 10:19:59 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 10:19:59 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Wed Jul 18 10:19:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.834
[Wed Jul 18 10:19:59 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.47"
[Wed Jul 18 14:58:04 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jul 18 14:58:04 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jul 18 14:58:04 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src27 appears to have run properly
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jul 18 14:58:06 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Jul 18 19:02:19 2012] Spatial fit model total counts = 1078.970000, observed total counts = 1079.000000
[Wed Jul 18 19:02:19 2012] Offset between fit and detection position for source 63 = 1.008607 pixels
[Wed Jul 18 19:02:19 2012] 1017.796000 total counts/ 907.894000 bgd. counts: snr = 3.647439
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.008607 pixels
  Position = (261.0, 257.2) = 8 57 55.34 -41 52 20.9
  Extent = 11.8 (3.4-16.9)", rotation angle = 0
  Source counts = 109.9 +/- 31.9
  Background counts = 907.9
  Rate = 0.002 +/- 0.0007
[Wed Jul 18 19:02:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:19 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:02:19 2012] Source does appear to be extended
[Wed Jul 18 19:02:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:19 2012] Source is confused with source 64
[Wed Jul 18 22:23:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 22:23:04 2012] Initial guess for spatial extent in simple fitting = 11.82"
[Wed Jul 18 22:23:04 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.869
[Wed Jul 18 22:23:04 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 11.82"
[Thu Jul 19 01:59:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jul 19 01:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src21.csv
[Thu Jul 19 01:59:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jul 19 01:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src21.csv
[Thu Jul 19 01:59:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jul 19 01:59:08 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Jul 19 04:52:47 2012] Spatial fit model total counts = 1244.750000, observed total counts = 1226.000000
[Thu Jul 19 04:52:47 2012] Offset between fit and detection position for source 63 = 0.601678 pixels
[Thu Jul 19 04:52:47 2012] 1270.478000 total counts/ 1157.800000 bgd. counts: snr = 3.311482
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.601678 pixels
  Position = (261.5, 257.6) = 8 57 55.15 -41 52 19.3
  Extent = 14.2 (4.6-20.4)", rotation angle = 0
  Source counts = 112.7 +/- 35.6
  Background counts = 1157.8
  Rate = 0.002 +/- 0.0007
[Thu Jul 19 04:52:47 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:47 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:47 2012] Source does appear to be extended
[Thu Jul 19 04:52:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 07:32:03 2012] XMMSAS src. selection expression = ellipse(22702.788200, 22361.216000, 852.756025, 852.756025, 0.000000, X, Y)
[Thu Jul 19 07:32:03 2012] Writing source region out to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src63_src.reg
[Thu Jul 19 07:32:03 2012] Extracting stamp from image fullrun_mos1_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (213, 209) - (311, 307)
[Thu Jul 19 07:32:03 2012] XMMSAS bgd. selection expression = annulus(22702.788200, 22361.216000, 1421.260041, 2842.520082, X, Y) && !ellipse(25330.414400, 24723.576600, 363.732010, 363.732010, 0.000000, X, Y) && !ellipse(21034.720000, 22392.012000, 335.670410, 335.670410, 0.000000, X, Y) && !ellipse(22735.972000, 24226.370000, 2710.776078, 2710.776078, 0.000000, X, Y) && !ellipse(23565.042000, 23352.586000, 2442.368070, 2442.368070, 0.000000, X, Y) && !ellipse(24406.908000, 25407.818000, 2307.984066, 2307.984066, 0.000000, X, Y) && !ellipse(21548.660000, 23043.176000, 1661.200048, 1661.200048, 0.000000, X, Y) && !ellipse(21049.002655, 22005.842026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.158234, 25539.432465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21306.432968, 22912.883667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23092.846863, 25090.079376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.210000, 23448.248000, 1317.384038, 1317.384038, 0.000000, X, Y) && !ellipse(24315.835663, 24925.398529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23346.412781, 24490.316223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.510000, 23909.418000, 1349.200039, 1349.200039, 0.000000, X, Y) && !ellipse(22128.272000, 23472.990000, 1356.712039, 1356.712039, 0.000000, X, Y) && !ellipse(23504.787933, 25878.577942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.940000, 26145.929400, 1159.056033, 1159.056033, 0.000000, X, Y) && !ellipse(18373.408829, 20813.059494, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22695.940000, 22555.788000, 2221.840064, 2221.840064, 0.000000, X, Y) && !ellipse(25921.310638, 24923.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.399704, 22695.898743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22964.577087, 25516.110687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22938.151400, 21100.356000, 1376.288040, 1376.288040, 0.000000, X, Y)
[Thu Jul 19 07:32:03 2012] Writing fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src63.gif
[Thu Jul 19 07:49:43 2012] Mean detx,y = (-582.98, 3295.27) 
[Thu Jul 19 07:49:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 07:49:54 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 07:49:54 2012] Setting source spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Jul 19 07:49:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Thu Jul 19 14:41:26 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:26 2012] Error reading totcts from fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Jul 19 14:41:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:26 2012] Using photon index=1.80, rate=0.00235, arf fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src63.arf
[Thu Jul 19 14:41:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:26 2012] Updating source flux to 2.2e-14
[Thu Jul 19 14:41:30 2012] Flag c found in src. 63 procflags, skipping spectral fitting