[Wed Jul 18 06:40:37 2012] Detection parameters:
  Position = (329.0, 309.2) = 8 57 28.89 -41 48 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.7 +/- 13.1
  Background counts = 26.4
  Rate = 0.002 +/- 0.0003

[Wed Jul 18 06:40:38 2012] Off-axis axis estimate = 2.35'
[Wed Jul 18 10:19:59 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 10:19:59 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Wed Jul 18 10:19:59 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Wed Jul 18 10:19:59 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.60"
[Wed Jul 18 14:58:05 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src49.ximg exists
[Wed Jul 18 14:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src49.csv
[Wed Jul 18 14:58:05 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src49_1.ximg exists
[Wed Jul 18 14:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src49.csv
[Wed Jul 18 14:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Wed Jul 18 14:58:06 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Wed Jul 18 19:02:19 2012] Spatial fit model total counts = 581.288000, observed total counts = 583.000000
[Wed Jul 18 19:02:19 2012] Offset between fit and detection position for source 34 = 3.273825 pixels
[Wed Jul 18 19:02:19 2012] 561.790200 total counts/ 479.384000 bgd. counts: snr = 3.763727
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 3.273825 pixels
  Position = (326.9, 311.7) = 8 57 29.68 -41 48 23.7
  Extent = 15.2 (15.2-30.4)", rotation angle = 0
  Source counts = 82.4 +/- 23.7
  Background counts = 479.4
  Rate = 0.002 +/- 0.0005
[Wed Jul 18 19:02:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:19 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:02:19 2012] Source does appear to be extended
[Wed Jul 18 19:02:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:19 2012] Source is confused with source 27
[Wed Jul 18 19:02:19 2012] Source is confused with source 35
[Wed Jul 18 19:02:19 2012] Source is confused with source 38
[Wed Jul 18 22:23:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 22:23:04 2012] Initial guess for spatial extent in simple fitting = 15.20"
[Wed Jul 18 22:23:04 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.002
[Wed Jul 18 22:23:04 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 15.20"
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src41.ximg exists
[Thu Jul 19 01:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src41.csv
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu Jul 19 01:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src41.csv
[Thu Jul 19 01:59:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu Jul 19 01:59:08 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Thu Jul 19 04:52:47 2012] Spatial fit model total counts = 974.366000, observed total counts = 971.000000
[Thu Jul 19 04:52:47 2012] Offset between fit and detection position for source 34 = 2.604836 pixels
[Thu Jul 19 04:52:47 2012] 920.240500 total counts/ 863.993000 bgd. counts: snr = 1.913587
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.604836 pixels
  Position = (329.5, 311.3) = 8 57 28.68 -41 48 25.7
  Extent = 13.0 (3.8-30.4)", rotation angle = 0
  Source counts = 56.2 +/- 30.3
  Background counts = 864.0
  Rate = 0.001 +/- 0.0006
[Thu Jul 19 04:52:47 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:47 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:47 2012] Source does appear to be extended
[Thu Jul 19 04:52:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 07:32:04 2012] XMMSAS src. selection expression = ellipse(28618.362000, 27032.394200, 777.768022, 777.768022, 0.000000, X, Y)
[Thu Jul 19 07:32:04 2012] Writing source region out to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src34_src.reg
[Thu Jul 19 07:32:04 2012] Extracting stamp from image fullrun_mos1_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (285, 267) - (374, 356)
[Thu Jul 19 07:32:04 2012] XMMSAS bgd. selection expression = annulus(28618.362000, 27032.394200, 1296.280037, 2592.560075, X, Y) && !ellipse(24406.908000, 25407.818000, 2307.984066, 2307.984066, 0.000000, X, Y) && !ellipse(25454.158234, 25539.432465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25455.137939, 26397.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26249.878479, 26824.256897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30423.117249, 28385.868134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25174.635000, 27600.038780, 1148.808033, 253.257607, 158.953000, X, Y) && !ellipse(26759.606934, 26836.544373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.366000, 27519.256000, 1162.936033, 1162.936033, 0.000000, X, Y) && !ellipse(26949.152130, 26053.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25921.310638, 24923.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.185333, 25620.530334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28090.750000, 26114.465200, 1155.624033, 1155.624033, 0.000000, X, Y) && !ellipse(28081.511505, 27005.422821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25242.592224, 26820.287628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27785.961609, 26489.022278, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 07:32:04 2012] Writing fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src34.gif
[Thu Jul 19 07:56:26 2012] Mean detx,y = (-626.72, -4120.39) 
[Thu Jul 19 07:56:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 07:56:38 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 07:56:38 2012] Setting source spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Jul 19 07:56:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Jul 19 13:16:59 2012] Not generating rmf since there are only 56 counts
[Thu Jul 19 13:16:59 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:26 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:26 2012] Error reading totcts from fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Jul 19 14:41:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:27 2012] Using photon index=1.80, rate=0.00117, arf fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src34.arf
[Thu Jul 19 14:41:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:27 2012] Updating source flux to 1.3e-14
[Thu Jul 19 14:41:30 2012] Flag c found in src. 34 procflags, skipping spectral fitting
[Thu Jul 19 14:41:30 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting