[Wed Jul 18 06:40:37 2012] Detection parameters:
  Position = (297.0, 311.9) = 8 57 41.33 -41 48 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.1 +/- 14.8
  Background counts = 29.9
  Rate = 0.002 +/- 0.0003

[Wed Jul 18 06:40:38 2012] Off-axis axis estimate = 0.98'
[Wed Jul 18 10:19:59 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 10:19:59 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Wed Jul 18 10:19:59 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.915
[Wed Jul 18 10:19:59 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 6.92"
[Wed Jul 18 14:58:05 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src43.ximg exists
[Wed Jul 18 14:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src43.csv
[Wed Jul 18 14:58:05 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Jul 18 14:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src43.csv
[Wed Jul 18 14:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Jul 18 14:58:06 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Jul 18 19:02:19 2012] Warning, spatial fit 43 centroid is now closest to src. 33
[Wed Jul 18 19:02:19 2012] Source 28 is offset by 1.550912 and -2.846845 pixels which is larger than
2 X fitted extent = 0.803991 x 0.803991, not incorporating fit results
[Wed Jul 18 19:02:19 2012] Spatial fit model total counts = 474.706000, observed total counts = 476.000000
[Wed Jul 18 19:02:19 2012] Offset between fit and detection position for source 28 = 8.008285 pixels
[Wed Jul 18 19:02:19 2012] Warning, changing simple spatial fit ID from 43 to 73
[Wed Jul 18 19:02:19 2012] 451.661600 total counts/ 398.227000 bgd. counts: snr = 2.677671
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 8.008285 pixels
  Position = (290.7, 316.9) = 8 57 43.79 -41 48 1.4
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 53.4 +/- 21.3
  Background counts = 398.2
  Rate = 0.001 +/- 0.0004
[Wed Jul 18 19:02:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:19 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:02:19 2012] Source does appear to be extended
[Wed Jul 18 19:02:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:19 2012] Source is confused with source 25
[Wed Jul 18 22:23:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 22:23:04 2012] Initial guess for spatial extent in simple fitting = 14.54"
[Wed Jul 18 22:23:04 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.084
[Wed Jul 18 22:23:04 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 14.54"
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src36.ximg exists
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src36_1.ximg exists
[Thu Jul 19 01:59:07 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src36 appears to have run properly
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Thu Jul 19 01:59:08 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Thu Jul 19 01:59:08 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Thu Jul 19 04:52:47 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 10.096113 pixels away
[Thu Jul 19 04:52:47 2012] Warning, spatial fit 36 centroid is now closest to src. 29
[Thu Jul 19 04:52:47 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:47 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:47 2012] Source does appear to be extended
[Thu Jul 19 04:52:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 07:32:04 2012] XMMSAS src. selection expression = ellipse(25240.366000, 27519.256000, 872.202025, 872.202025, 0.000000, X, Y)
[Thu Jul 19 07:32:04 2012] Writing source region out to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src28_src.reg
[Thu Jul 19 07:32:04 2012] Extracting stamp from image fullrun_mos1_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (241, 267) - (341, 367)
[Thu Jul 19 07:32:04 2012] XMMSAS bgd. selection expression = annulus(25240.366000, 27519.256000, 1453.670042, 2907.340084, X, Y) && !ellipse(25330.414400, 24723.576600, 363.732010, 363.732010, 0.000000, X, Y) && !ellipse(22735.972000, 24226.370000, 2710.776078, 2710.776078, 0.000000, X, Y) && !ellipse(23565.042000, 23352.586000, 2442.368070, 2442.368070, 0.000000, X, Y) && !ellipse(24406.908000, 25407.818000, 2307.984066, 2307.984066, 0.000000, X, Y) && !ellipse(21548.660000, 23043.176000, 1661.200048, 1661.200048, 0.000000, X, Y) && !ellipse(25454.158234, 25539.432465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23092.846863, 25090.079376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.210000, 23448.248000, 1317.384038, 1317.384038, 0.000000, X, Y) && !ellipse(25455.137939, 26397.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24629.628000, 26401.216000, 830.176024, 830.176024, 0.000000, X, Y) && !ellipse(24315.835663, 24925.398529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23346.412781, 24490.316223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.510000, 23909.418000, 1349.200039, 1349.200039, 0.000000, X, Y) && !ellipse(22128.272000, 23472.990000, 1356.712039, 1356.712039, 0.000000, X, Y) && !ellipse(26249.878479, 26824.256897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23504.787933, 25878.577942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.940000, 26145.929400, 1159.056033, 1159.056033, 0.000000, X, Y) && !ellipse(25174.635000, 27600.038780, 1148.808033, 253.257607, 158.953000, X, Y) && !ellipse(26759.606934, 26836.544373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22695.940000, 22555.788000, 2221.840064, 2221.840064, 0.000000, X, Y) && !ellipse(26949.152130, 26053.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25921.310638, 24923.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28618.362000, 27032.394200, 1037.024030, 1037.024030, 0.000000, X, Y) && !ellipse(26942.185333, 25620.530334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.803192, 27177.580231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28090.750000, 26114.465200, 1155.624033, 1155.624033, 0.000000, X, Y) && !ellipse(22964.577087, 25516.110687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.511505, 27005.422821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25242.592224, 26820.287628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27785.961609, 26489.022278, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 07:32:04 2012] Writing fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src28.gif
[Thu Jul 19 07:54:37 2012] Mean detx,y = (-2960.32, -1749.82) 
[Thu Jul 19 07:54:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 07:54:49 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 07:54:49 2012] Setting source spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jul 19 07:54:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jul 19 12:49:46 2012] Not generating rmf since there are only 53 counts
[Thu Jul 19 12:49:46 2012] rmf not generated due to insufficient counts
[Thu Jul 19 14:41:26 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:26 2012] Error reading totcts from fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jul 19 14:41:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:27 2012] Using photon index=1.80, rate=0.00112, arf fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src28.arf
[Thu Jul 19 14:41:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:27 2012] Updating source flux to 1.1e-14
[Thu Jul 19 14:41:30 2012] Flag b found in src. 28 procflags, skipping spectral fitting
[Thu Jul 19 14:41:30 2012] Flag c found in src. 28 procflags, skipping spectral fitting
[Thu Jul 19 14:41:30 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting